SIST EN ISO 17295:2023
(Main)Additive manufacturing - General principles - Part positioning, coordinates and orientation (ISO 17295:2023)
Additive manufacturing - General principles - Part positioning, coordinates and orientation (ISO 17295:2023)
This document provides specifications and illustrations for the positioning and orientation of parts with regards with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize the method of representation used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Included specifications cover coordinate systems and the location and orientation of parts. It is intended to be in accordance with the principles of ISO 841 and to clarify the specific adaptation of those principles for additive manufacturing.
Additive Fertigung - Grundlagen - Positionierung, Koordinaten und Ausrichtung des Bauteils (ISO 17295:2023)
Dieses Dokument stellt Spezifikationen und Darstellungen für die Positionierung und Ausrichtung von Bauteilen in Koordinatensystemen und Prüfverfahren für Technologien der additiven Fertigung (AM, en: additive manufacturing) bereit. Auf diese Weise soll das von AM-Anwendern, Herstellern, Forschern, Lehrern, der Presse/den Medien von sowie anderen verwendete Darstellungsverfahren genormt werden, besonders bei einer Berichterstattung über die Resultate der Prüfungen von Bauteilen, die aus AM-Systemen erzeugt wurden. Auch die Bezeichnungen für Koordinatensysteme sowie die Position und die Ausrichtung der Bauteile sind mit inbegriffen. Diese Terminologie soll möglichst ISO 841 entsprechen und die spezifische Adaption dieser Grundsätze für die Additive Fertigung verdeutlichen.
Fabrication additive - Principes généraux - Positionnement, coordonnées et orientation de la pièce (ISO 17295:2023)
Le présent document fournit des spécifications et des illustrations pour le positionnement et l’orientation des pièces en considération des systèmes de coordonnées et des méthodes d’essai pour les technologies de fabrication additive (FA) dans le but de normaliser la méthode de représentation utilisée par les utilisateurs, les producteurs, les chercheurs, les enseignants, la presse/les médias et autres partenaires de la FA, particulièrement lors de la communication des résultats d’essais de pièces réalisées sur des systèmes de FA. Les spécifications comprises couvrent les systèmes de coordonnées ainsi que l’emplacement et l'orientation des pièces. Il est prévu d’assurer la conformité aux principes de l’ISO 841 et de clarifier l’adaptation spécifique de ces principes à la fabrication additive.
Aditivna proizvodnja - Splošna načela - Pozicioniranje, koordinate in orientacija delov (ISO 17295:2023)
Ta dokument podaja specifikacije in ponazoritve za pozicioniranje in orientacijo delov v povezavi s koordinatnimi sistemi in preskusnimi metodologijami za tehnologije aditivne proizvodnje (AM) za namene standardizacije metode predstavitve, ki jo uporabljajo uporabniki aditivne proizvodnje, razvijalci, raziskovalci, učitelji, mediji in drugi, zlasti pri poročanju rezultatov preskušanja delov, izdelanih v sistemih aditivne proizvodnje. Vključene specifikacije zajemajo koordinatne sisteme ter lokacijo in orientacijo delov. Namen je zagotoviti skladnost z načeli standarda ISO 841 in pojasniti specifično prilagoditev teh načel aditivni proizvodnji.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17295:2023
01-marec-2023
Nadomešča:
SIST EN ISO/ASTM 52921:2016
Aditivna proizvodnja - Splošna načela - Pozicioniranje, koordinate in orientacija
delov (ISO 17295:2023)
Additive manufacturing - General principles - Part positioning, coordinates and
orientation (ISO 17295:2023)
Additive Fertigung - Grundlagen - Positionierung, Koordinaten und Ausrichtung des
Bauteils (ISO 17295:2023)
Fabrication additive - Principes généraux - Positionnement, coordonnées et orientation
de la pièce (ISO 17295:2023)
Ta slovenski standard je istoveten z: EN ISO 17295:2023
ICS:
25.030 3D-tiskanje Additive manufacturing
SIST EN ISO 17295:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17295:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 17295:2023
EN ISO 17295
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2023
EUROPÄISCHE NORM
ICS 25.030 Supersedes EN ISO/ASTM 52921:2016
English Version
Additive manufacturing - General principles - Part
positioning, coordinates and orientation (ISO 17295:2023)
Fabrication additive - Principes généraux - Additive Fertigung - Grundlagen - Positionierung,
Positionnement, coordonnées et orientation de la pièce Koordinaten und Ausrichtung des Bauteils (ISO
(ISO 17295:2023) 17295:2023)
This European Standard was approved by CEN on 17 January 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17295:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17295:2023
EN ISO 17295:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17295:2023
EN ISO 17295:2023 (E)
European foreword
This document (EN ISO 17295:2023) has been prepared by Technical Committee ISO/TC 261 "Additive
manufacturing" in collaboration with Technical Committee CEN/TC 438 “Additive Manufacturing” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2023, and conflicting national standards shall be
withdrawn at the latest by July 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO/ASTM 52921:2016.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 17295:2023 has been approved by CEN as EN ISO 17295:2023 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17295:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 17295:2023
INTERNATIONAL ISO
STANDARD 17295
First edition
2023-01
Additive manufacturing — General
principles — Part positioning,
coordinates and orientation
Fabrication additive — Principes généraux — Positionnement,
coordonnées et orientation de la pièce
Reference number
ISO 17295:2023(E)
© ISO 2023
---------------------- Page: 7 ----------------------
SIST EN ISO 17295:2023
ISO 17295:2023(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2023 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17295:2023
ISO 17295:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Machine coordinate systems for additive manufacturing machines with different
build directions . 1
4.1 General . 1
4.2 Machine coordinate system for additive manufacturing machines with upwards
Z-positive build direction. 1
4.3 Machine coordinate system for additive manufacturing machines with
downwards Z-positive build direction. 2
5 Rule for positive direction of axes of rotation . 3
6 Bounding box . 3
7 Initial build orientation.4
8 Orthogonal orientation notation .6
8.1 General . 6
8.2 Bilateral symmetry . 7
8.3 Abbreviation of orthogonal orientation notation. 8
9 Representation of part location and initial build orientation . 8
10 Representation of part location and reorientation . 9
Bibliography .12
iii
© ISO 2023 – All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 17295:2023
ISO 17295:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical ISO/TC 261, Additive manufacturing, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 438, Additive
manufacturing, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
The first edition of ISO 17295 cancels and replaces ISO/ASTM 52921:2013, which has been technically
revised.
The main changes are as follows:
— terms and definitions that are included in ISO/ASTM 52900 have been removed from this document
and instead referred to ISO/ASTM 52900;
— since the list of terms and definitions have been removed from this edition, it is therefore not a
standard terminology anymore, and therefore it has been renamed so that the title describes the
actual content of the standard;
— the remaining normative content of the document including the annex have been consolidated into
one single normative document;
— specifications of some aspects of initial build orientation and orthogonal orientation notation have
been integrated in the text body of the document.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
© ISO 2023 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 17295:2023
ISO 17295:2023(E)
Introduction
Although many additive manufacturing systems are based heavily upon the principles of computer
numerical control (CNC), the coordinate systems and nomenclature specific to CNC are not sufficient to
be applicable across the full spectrum of additive manufacturing equipment. This document expands
upon the principles of ISO 841 and applies them specifically to additive manufacturing.
v
© ISO 2023 – All rights reserved
---------------------- Page: 11 ----------------------
SIST EN ISO 17295:2023
---------------------- Page: 12 ----------------------
SIST EN ISO 17295:2023
INTERNATIONAL STANDARD ISO 17295:2023(E)
Additive manufacturing — General principles — Part
positioning, coordinates and orientation
1 Scope
This document provides specifications and illustrations for the positioning and orientation of parts
with regards with coordinate systems and testing methodologies for additive manufacturing (AM)
technologies in an effort to standardize the method of representation used by AM users, producers,
researchers, educators, press/media, and others, particularly when reporting results from testing of
parts made on AM systems. Included specifications cover coordinate systems and the location and
orientation of parts. It is intended to be in accordance with the principles of ISO 841 and to clarify the
specific adaptation of those principles for additive manufacturing.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 841, Industrial automation systems and integration — Numerical control of machines — Coordinate
system and motion nomenclature
ISO/ASTM 52900, Additive manufac
...
SLOVENSKI STANDARD
oSIST prEN ISO/ASTM 52921:2019
01-december-2019
Aditivna proizvodnja - Splošna načela - Standardna praksa za pozicioniranje,
koordinate in orientacijo delov (ISO/ASTM DIS 52921:2019)
Additive manufacturing - General principles - Standard practice for part positioning,
coordinates and orientation (ISO/ASTM DIS 52921:2019)
Additive Fertigung - Grundlagen - Standardpraxis der Positionierung, Koordinaten und
Ausrichtung des Bauteils (ISO/ASTM DIS 52921:2019)
Fabrication additive - Principes généraux - Pratique normalisée pour le positionnement,
les coordonnées et l'orientation de la pièce (ISO/ASTM DIS 52921:2019)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52921
ICS:
25.030 3D-tiskanje Additive manufacturing
oSIST prEN ISO/ASTM 52921:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO/ASTM 52921:2019
---------------------- Page: 2 ----------------------
oSIST prEN ISO/ASTM 52921:2019
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52921
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-09-27 2019-12-20
Additive manufacturing — General principles — Standard
practice for part positioning, coordinates and orientation
Terminologie normalisée pour la fabrication additive — Systèmes de coordonnées et méthodes d'essai
ICS: 25.030
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/ASTM DIS 52921:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019
---------------------- Page: 3 ----------------------
oSIST prEN ISO/ASTM 52921:2019
ISO/ASTM DIS 52921:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be
reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
ISO copyright office ASTM International
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
Phone: +41 22 749 01 11 Phone: +610 832 9634
Fax: +41 22 749 09 47 Fax: +610 832 9635
Email: copyright@iso.org Email: khooper@astm.org
Website: www.iso.org Website: www.astm.org
Published in Switzerland
ii © ISO/ASTM International 2019 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO/ASTM 52921:2019
ISO/ASTM DIS 52921:2019(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Coordinate systems for additive manufacturing machines with different build directions .1
4.1 Coordinate system for additive manufacturing with upwards z-positive build direction . 1
4.2 Coordinate system for additive manufacturing with downwards z-positive build
direction . 2
4.3 Coordinate system for additive manufacturing with horizontal z-positive build direction . 2
5 Rule for positive rotation . 3
6 Bounding box . 3
6.1 Bounding boxes and orientation . 4
7 Initial Build Orientation . 5
7.1 Variations of initial build orientation of parts with identical orthogonal notation
orientation . 6
8 Orthogonal orientation notation . 7
8.1 Bilateral symmetry . 8
8.2 Abbreviation of orthogonal orientation notation . 9
9 Representation of part location and initial build orientation . 9
10 Representation of part location and reorientation .10
Bibliography .12
© ISO/ASTM International 2019 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO/ASTM 52921:2019
ISO/ASTM DIS 52921:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso
.org/iso/foreword .html.
The committee responsible for this document is ISO/TC 261, Additive manufacturing, in cooperation
with ASTM Committee F42, Additive Manufacturing Technologies, on the basis of a partnership
agreement between ISO and ASTM International with the aim to create a common set of ISO/ASTM
standards on Additive Manufacturing.
This second edition of ISO/ASTM 52921 replaces first edition (ISO/ASTM 52921:2013), which has been
technically revised.
The main changes compared to the previous edition are as follows:
— Terms and definitions that are included in ISO/ASTM 52900:2019 "Additive manufacturing —
General principles — Fundamentals and vocabulary" have been removed from this document and
instead referred to ISO/ASTM 52900;
— Since the list of terms and definitions have been removed from this edition, it is therefore not a
standard terminology anymore, and therefore it has been renamed so that the title describes the
actual content of the standard;
— The remaining normative content of the document including the annex have been consolidated into
one single normative document;
— Specifications of some aspects of initial build orientation and orthogonal orientation notation have
been integrated in the text body of the document;
— The coordinate system for additive manufacturing with horizontal z-positive build direction is
described and illustrated.
iv © ISO/ASTM International 2019 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO/ASTM 52921:2019
ISO/ASTM DIS 52921:2019(E)
Introduction
Although many additive manufacturing systems are based heavily upon the principles of Computer
Numerical Control (CNC), the coordinate systems and nomenclature specific to CNC are not sufficient to
be applicable across the full spectrum of additive manufacturing equipment. This International Standard
expands upon the principles of ISO 841 and applies them specifically to additive manufacturing.
Although this International Standard is intended to complement ISO 841, if there should arise any
conflict, it is this International Standard shall have priority for additive manufacturing applications.
For any issues not covered in this International Standard, the principles in ISO 841 may be applied.
© ISO/ASTM International 2019 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO/ASTM 52921:2019
---------------------- Page: 8 ----------------------
oSIST prEN ISO/ASTM 52921:2019
DRAFT INTERNATIONAL STANDARD ISO/ASTM DIS 52921:2019(E)
Additive manufacturing — General principles — Standard
practice for part positioning, coordinates and orientation
1 Scope
This document provides specifications and illustrations for the positioning and orientation of parts
with regards with coordinate systems and testing methodologies for additive manufacturing (AM)
technologies in an effort to standardize the method of representation used by AM users, producers,
researchers, educators, press/media, and others, particularly when reporting results from testing of
parts made on AM systems. Specifications included cover coordinate systems and the location and
orientation of parts. It is intended, where possible, to be compliant with the principles of ISO 841 and to
clarify the specific adaptation of those principles for additive manufacturing.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/ASTM 52900:2019, Additive manufacturing — General principles — Fundamentals and vocabulary
ISO 841:2001, Industrial automation systems and integration — Numerical control of machines —
Coordinate system and motion nomenclature
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO/ASTM 52900 shall apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https: //www .iso .org/obp
— IEC Electropedia: available at http: //www .electropedia .org/
4 Coordinate systems for additive manufacturing machines with different build
directions
The location and orientation of a part within the build volume shall be specified using coordinates in a
three-dimensional coordinate system. The coordinate system can be Cartisian or otherwise defined by
the machine manufacturer. Examples of different types of coordinate systems are illustrated in Figures
1, 2 and 3.
4.1 Coordinate system for additive manufacturing with upwards z-positive build
direction
A three-dimesnional Cartesian coordinate system located at the build origin for a generic additive
manufacturing process using upwards z-positive building direction, is illustrated as seen from the front
of the machine in Figure 1. This is the most common type of coordinate system and is used for processes
within all defined additive manufacturing process categories, though other types of coordinate systems
can be used for specific process solutions within some process categories.
© ISO/ASTM International 2019 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO/ASTM 52921:2019
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.