SIST EN ISO 14910-1:2006
(Main)Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications (ISO 14910-1:1997)
Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications (ISO 14910-1:1997)
This part of the standard establishes a system of designation for thermoplastic polyester/ester and polyether/ester elastomers, which may be used as the basis for specifications.
Kunststoffe - Thermoplastische Polyester/Ester- und Polyether/Ester- Elastomer-Formmassen - Teil 1: Bezeichnungssystem und Basis für Spezifikationen (ISO 14910-1:1997)
1.1 In diesem Teil von ISO 14910 ist ein Bezeichnungssystem für thermoplastische Polyester/Ester- und
Polyether/Ester-Elastomer-Formmassen festgelegt, das als Grundlage für Spezifikationen dienen kann.
1.2 Die Polyester/Ester- und Polyether/Ester-Elastomer-Formmasse-Typen werden mit Hilfe eines
Einteilungssystems voneinander unterschieden, das auf geeigneten Wertebereichen der kennzeichnenden
Eigenschaften
a) Härte,
b) Schmelztemperatur,
c) Zug-/Biege-Elastizitätsmodul
und Informationen über vorgesehene Anwendung und/oder Verarbeitungsverfahren, wichtige Eigenschaften,
Additive und Farbstoffe, Füll- und Verstärkungsstoffe beruht.
1.3 Dieser Teil von ISO 14910 ist für alle thermoplastischen Polyester/Ester- und Polyether/Ester-Elastomer-
Formmassen anwendbar.
Er gilt für gebrauchsfertige Formmassen in Form von Pulver, Pellets oder Granulat und für mit Farbstoffen,
Füllstoffen oder sonstige Additiven modifizierte oder nicht modifizierte Materialien.
1.4 Es darf nicht unterstellt werden, dass Formmassen mit der gleichen Bezeichnung notwendigerweise ein
gleiches Leistungsverhalten zeigen. Dieser Teil von ISO 14910 enthält keine technischen Daten, Leistungs-angaben
oder Verarbeitungsbedingungen, die gefordert werden dürfen, um eine Formmasse für eine
bestimmte Anwendung und/oder Verarbeitungsart festzulegen.
Falls derartige zusätzliche Eigenschaften verlangt sind, müssen sie, falls zutreffend, mit Hilfe der in Teil 2
dieser Internationalen Norm festgelegten Prüfverfahren bestimmt werden.
1.5 Um ein thermoplastisches Polyester/Ester- oder Polyether/Ester-Elastomer-Material für eine bestimmte
Anwendung festzulegen oder um eine reproduzierbare Verarbeitung sicherzustellen, dürfen im Daten-Block 5
(siehe Abschnitt 3, Einleitung) zusätzliche Anforderungen angegeben werden.
Plastiques - Elastomeres thermoplastiques a base de polyester/ester et polyéther/ester, pour moulage et extrusion - Partie 1: Systeme de désignation et base de spécification (ISO 14910-1:1997)
Polimerni materiali – Plastomerni poliester/ester in polieter/ester elastomeri za oblikovanje in ekstrudiranje – 1. del: Sistem označevanja in podlage za specifikacije (ISO 14910-1:1997)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications (ISO 14910-1:1997)Plastiques - Elastomeres thermoplastiques a base de polyester/ester et polyéther/ester, pour moulage et extrusion - Partie 1: Systeme de désignation et base de spécification (ISO 14910-1:1997)Kunststoffe - Thermoplastische Polyester/Ester- und Polyether/Ester- Elastomer-Formmassen - Teil 1: Bezeichnungssystem und Basis für Spezifikationen (ISO 14910-1:1997)Ta slovenski standard je istoveten z:EN ISO 14910-1:2006SIST EN ISO 14910-1:2006en83.080.20ICS:SLOVENSKI
STANDARDSIST EN ISO 14910-1:200601-julij-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 14910-1April 2006ICS 83.080.20 English VersionPlastics - Thermoplastic polyester/ester and polyether/esterelastomers for moulding and extrusion - Part 1: Designationsystem and basis for specifications (ISO 14910-1:1997)Plastiques - Elastomères thermoplastiques à base depolyester/ester et polyéther/ester, pour moulage etextrusion - Partie 1: Système de désignation et base despécification (ISO 14910-1:1997)Kunststoffe - Thermoplastische Polyester/Ester- undPolyether/Ester- Elastomer-Formmassen - Teil 1:Bezeichnungssystem und Basis für Spezifikationen (ISO14910-1:1997)This European Standard was approved by CEN on 16 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 14910-1:2006: E
Foreword
The text of ISO 14910-1:1997 has been prepared by Technical Committee ISO/TC 61 "Plastics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 14910-1:2006 by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 14910-1:1997 has been approved by CEN as EN ISO 14910-1:2006 without any modifications.
AReference numberISO 14910-1:1997(E)INTERNATIONALSTANDARDISO14910-1First edition1997-12-15Plastics — Thermoplastic polyester/esterand polyether/ester elastomers formoulding and extrusion —Part 1:Designation system and basis forspecificationsPlastiques — Élastomères thermoplastiques à base de polyester/ester etpolyéther/ester, pour moulage et extrusion —Partie 1: Système de désignation et base de spécification
ISO 14910-1:1997(E)©
ISO 1997All rights reserved. Unless otherwise specified, no part of this publication may be reproducedor utilized in any form or by any means, electronic or mechanical, including photocopying andmicrofilm, without permission in writing from the publisher.International Organization for StandardizationCase postale 56 · CH-1211 Genève 20 · SwitzerlandInternetcentral@iso.chX.400c=ch; a=400net; p=iso; o=isocs; s=centralPrinted in SwitzerlandiiForewordISO (the International Organization for Standardization) is a worldwidefederation of national standards bodies (ISO member bodies). The work ofpreparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for whicha technical committee has been established has the right to be representedon that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISOcollaborates closely with the International Electrotechnical Commission(IEC) on all matters of electrotechnical standardization.Draft International Standards adopted by the technical committees arecirculated to the member bodies for voting. Publication as an InternationalStandard requires approval by at least 75 % of the member bodies castinga vote.International Standard ISO 14910-1 was prepared by Technical CommitteeISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic materials.ISO 14910 consists of the following parts, under the general title Plastics —Thermoplastic polyester/ester and polyether/ester elastomers for mouldingand extrusion :—Part 1: Designation system and basis for specifications—Part 2: Preparation of test specimens and determination of propertiesAnnex A forms an integral part of this part of ISO 14910.
INTERNATIONAL STANDARD
© ISOISO 14910-1:1997(E)1Plastics — Thermoplastic polyester/ester and polyether/esterelastomers for moulding and extrusion —Part 1:Designation system and basis for specifications1
Scope1.1
This part of ISO 14910 establishes a system of designation for thermoplastic polyester/ester andpolyether/ester elastomers, which may be used as the basis for specifications.1.2
The types of thermoplastic polyester/ester and polyether/ester elastomer are differentiated from each other bya classification system based on appropriate levels of the designatory propertiesa)hardness;b)melting temperature;c)tensile/flexural modulus of elasticity;and on information about the intended application and/or method of processing, important properties, additives,colourants, fillers and reinforcing materials.1.3
This part of ISO 14910 is applicable to all thermoplastic polyester/ester and polyether/ester elastomers.It applies to materials ready for normal use in the form of powder, granules or pellets, unmodified or modified bycolourants, fillers or other additives.1.4
It is not intended to imply that materials having the same designation give necessarily the same performance.This part of ISO 14910 does not provide engineering data, performance data or data on processing conditionswhich may be required to specify a material for a particular application and/or method of processing.If such additional properties are required, they shall be determined in accordance with the test methods specified inpart 2 of this International Standard, if suitable.1.5
In order to specify a thermoplastic polyester/ester or polyether/ester material for a particular application or toensure reproducible processing, additional requirements may be given in data block 5 (see clause 3, introductoryparagraph).2
Normative referencesThe following standards contain provisions which, through reference in this text, constitute provisions of this part ofISO 14910. At the time of publication, the editions indicated were valid. All standards are subject to revision, andparties to agreements based on this part of ISO 14910 are encouraged to investigate the possibility of applying themost recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently validInternational Standards.ISO 1043-1:1997, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their specialcharacteristics.
ISO 14910-1:1997(E)© ISO2ISO 1043-2:1988, Plastics — Symbols — Part 2: Fillers and reinforcing materials.ISO 14910-2:1997, Plastics — Thermoplastic polyester/ester and polyether/ester elastomers for moulding andextrusion — Part 2: Preparation of test specimens and determination of properties.3
Designation systemThe designation system for thermoplastics is based on the following standardized pattern:DesignationIdentity blockDescriptionInternationalIndividual-item blockblockStandardDataDataDataDataData(optional)numberblockblockblockblockblockblock12345The designation consists of an optional description block, reading “Thermoplastics”, and an identity blockcomprising the International Standard number and an individual-item block. For unambiguous designation, theindividual-item block is subdivided into 5 data blocks comprising the following information:—Data block 1:Identification of the plastic by its symbol in accordance with ISO 1043-1 (see 3.1).—Data block 2:Position 1: Intended application or method of processing (see 3.2).Positions 2 to 8: Important properties, additives and supplementary information (see 3.2).—Data block 3:Designatory properties (see 3.3).—Data block 4:Fillers or reinforcing materials and their nominal content (see 3.4).—Data block 5:Information required for specification purposes is li
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.