SIST EN 61557-10:2013
(Main)Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures (IEC 61557-10:2013)
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures (IEC 61557-10:2013)
This part of IEC 61557 specifies the requirements for combined measuring equipment which combines into one piece of apparatus, several measuring functions or methods of testing, measuring or monitoring according to the respective parts of IEC 61557.
Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V - Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 10: Kombinierte Messgeräte zum Prüfen, Messen und Überwachen von Schutzmaßnahmen (IEC 61557-10:2013)
Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection - Partie 10: Appareils combinés de contrôle, de mesure ou de surveillance de mesures de protection (CEI 61557-10:2013)
La CEI 61557-10:2013 établit les exigences relatives aux appareils combinés de mesure qui réunissent en un seul appareil plusieurs fonctions de mesures ou méthodes de contrôle, de mesure ou de surveillance, selon les parties respectives de la CEI 61557. Cette deuxième édition annule et remplace la première édition parue en 2000. Cette édition constitue une révision technique. (sécurité électrique, appareils combinés de contrôle, de mesure ou de surveillance de mesures de protection)
Električna varnost v nizkonapetostnih razdelilnih sistemih za izmenične napetosti do 1 kV in enosmerne napetosti do 1,5 kV - Oprema za preskušanje, merjenje ali nadzorovanje zaščitnih ukrepov - 10. del: Kombinirana merilna oprema za preskušanje, merjenje ali nadzorovanje zaščitnih ukrepov (IEC 61557-10:2013)
Ta del IEC 61557 določa zahteve za kombinirano merilno opremo, ki je združena v eno samo napravo z več merilnimi funkcijami ali metodami preskušanja, merjenja ali nadzorovanja v skladu z zadevnimi deli IEC 61557.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektrische Sicherheit in Niederspannungsnetzen bis AC 1 000 V und DC 1 500 V - Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 10: Kombinierte Messgeräte zum Prüfen, Messen und Überwachen von Schutzmaßnahmen (IEC 61557-10:2013)Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures (IEC 61557-10:2013)29.240.01Power transmission and distribution networks in general29.080.01VSORãQRElectrical insulation in general17.220.20Measurement of electrical and magnetic quantitiesICS:Ta slovenski standard je istoveten z:EN 61557-10:2013SIST EN 61557-10:2013en01-september-2013SIST EN 61557-10:2013SLOVENSKI
STANDARDSIST EN 61557-10:20021DGRPHãþD
SIST EN 61557-10:2013
EUROPEAN STANDARD EN 61557-10 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61557-10:2013 E
ICS 17.220.20; 29.080.01; 29.240.01 Supersedes EN 61557-10:2001
English version
Electrical safety in low voltage distribution systems
up to 1 000 V a.c. and 1 500 V d.c. -
Equipment for testing, measuring or monitoring of protective measures -
Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures (IEC 61557-10:2013)
Sécurité électrique dans les réseaux de distribution basse tension
de 1 000 V c.a. et 1 500 V c.c. -
Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection -
Partie 10: Appareils combinés de contrôle, de mesure ou de surveillance de mesures de protection (CEI 61557-10:2013)
Elektrische Sicherheit in Niederspannungsnetzen
bis AC 1 000 V und DC 1 500 V -
Geräte zum Prüfen, Messen oder Überwachen von Schutzmaßnahmen - Teil 10: Kombinierte Messgeräte zum Prüfen, Messen und Überwachen von Schutzmaßnahmen
(IEC 61557-10:2013)
This European Standard was approved by CENELEC on 2013-06-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 61557-10:2013
EN 61557-10:2013 - 2 -
Foreword The text of document 85/442/FDIS, future edition 2 of IEC 61557-10, prepared by IEC/TC 85 "Measuring equipment for electrical and electromagnetic quantities" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61557-10:2013. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-03-03 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-06-03
This document supersedes EN 61557-10:2001. This European Standard is to be used in conjunction with EN 61557-1. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 61557-10:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61010-1:2010 NOTE
Harmonised as EN 61010-1:2010 (not modified). IEC 61557-8 NOTE
Harmonised as EN 61557-8. IEC 61557-9 NOTE
Harmonised as EN 61557-9. IEC 61557-11 NOTE
Harmonised as EN 61557-11. IEC 61557-12 NOTE
Harmonised as EN 61557-12. IEC 61557-13 NOTE
Harmonised as EN 61557-13.
SIST EN 61557-10:2013
- 3 - EN 61557-10:2013
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 61010-2-030 + corr. May
2010 2011 Safety requirements for electrical equipment for measurement, control and laboratory use -
Part 2-030: Particular requirements for testing and measuring circuits EN 61010-2-030 2010
IEC 61557-1 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -
Part 1: General requirements EN 61557-1 -
IEC 61557-2 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -
Part 2: Insulation resistance EN 61557-2 -
IEC 61557-3 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -
Part 3: Loop impedance EN 61557-3 -
IEC 61557-4 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -
Part 4: Resistance of earth connection and equipotential bonding EN 61557-4 -
IEC 61557-5 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -
Part 5: Resistance to earth EN 61557-5 -
IEC 61557-6 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -
Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems EN 61557-6 -
IEC 61557-7 - Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -
Part 7: Phase sequence EN 61557-7 -
SIST EN 61557-10:2013
SIST EN 61557-10:2013
IEC 61557-10 Edition 2.0 2013-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures –
Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures
Sécurité électrique dans les réseaux de distribution basse tension de 1 000 V c.a. et 1 500 V c.c. – Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection –
Partie 10: Appareils combinés de contrôle, de mesure ou de surveillance de mesures de protection
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE J ICS 17.220.20; 29.080.01; 29.240.01 PRICE CODE CODE PRIX ISBN 978-2-83220-757-4
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 61557-10:2013
– 2 – 61557-10 IEC:2013
CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Requirements . 6 4.1 General . 6 4.2 Marking and pictogram . 7 5 Marking and operating instructions . 7 6 Tests . 8 Bibliography . 9
Table 1 – Extraneous overvoltage withstand capability . 6
SIST EN 61557-10:2013
61557-10 IEC:2013 – 3 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS
UP TO 1 000 V a.c. AND 1 500 V d.c. – EQUIPMENT FOR TESTING,
MEASURING OR MONITORING OF PROTECTIVE MEASURES –
Part 10: Combined measuring equipment for testing,
measuring or monitoring of protective measures
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.