SIST EN 13880-8:2004
(Main)Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
This European Standard describes a method for determining the joint sealant resistance to fuel spillage by calculating the change in mass, after immersion in the standard reference fuel.
Heiß verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zur Bestimmung der Gewichtsänderung nach Treibstofflagerung
Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Beständigkeit von Fugenmassen gegen ausgelaufenen Treibstoff, in dem die Änderung der Masse nach Lagerung in genormtem Bezugstreib-stoff berechnet wird.
Produits de scellement de joints appliqués a chaud - Partie 8 : Méthode d'essai pour la détermination de la variation de masse apres immersion de produits de scellement résistants aux hydrocarbures
Cette Norme européenne décrit une méthode pour la détermination de la résistance des produits de scellement de joints lors du déversement d'hydrocarbures en calculant la variation de masse (le cas échéant), apres immersion dans l'hydrocarbure de référence standard.
Toplo nanosljive tesnilne mase za stike – 8. del: Preskusna metoda za ugotavljanje sprememb teže tesnilnih mas za stike, odpornih proti gorivu, po namakanju v gorivu
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplo nanosljive tesnilne mase za stike – 8. del: Preskusna metoda za ugotavljanje sprememb teže tesnilnih mas za stike, odpornih proti gorivu, po namakanju v gorivuHeiß verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zur Bestimmung der Gewichtsänderung nach TreibstofflagerungProduits de scellement de joints appliqués a chaud - Partie 8 : Méthode d'essai pour la détermination de la variation de masse apres immersion de produits de scellement résistants aux hydrocarburesHot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-8:2003SIST EN 13880-8:2004en01-junij-2004SIST EN 13880-8:2004SLOVENSKI
STANDARD
SIST EN 13880-8:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-8August 2003ICS 93.080.20English versionHot applied joint sealants - Part 8: Test method for thedetermination of the change in weight of fuel resistance jointsealants after fuel immersionProduits de scellement de joints appliqués à chaud - Partie8: Méthode d'essai pour la détermination de la variation demasse après immersion de matières de scellementrésistantes aux hydrocarburesHeiß verarbeitbare Fugenmassen - Teil 8: Prüfverfahrenzur Bestimmung der Gewichtsänderung nachTreibstofflagerungThis European Standard was approved by CEN on 2 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-8:2003 ESIST EN 13880-8:2004
EN 13880-8:2003 (E)2ContentspageForeword.31Scope.32Normative references.43Terms and definitions.44Principle.45Apparatus.46Preparation and conditioning of test specimens.57Procedure.58Calculation and expression of results.59Precision.510Test report.6SIST EN 13880-8:2004
EN 13880-8:2003 (E)3ForewordThis document EN 13880-8:2003 has been prepared by Technical Committee CEN/TC 227 “Road materials”, thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latestby March 2005.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.This European Standard is one of a series of standards as listed below:EN 13880-1, Hot applied joint sealants — Part 1: Test method for the determination of density at 25 °CEN 13880-2,Hot applied joint sealants — Part 2: Test method for the determination of cone penetration at 25 °C.EN 13880-3, Hot applied joint sealants — Part 3: Test method for the determination of penetration and recovery(resilience).EN 13880-4, Hot applied joint selants — Part 4: Test method for the determination of heat resistance — Change inpenetration value.EN 13880-5, Hot applied joint sealants — Part 5: Test method for the determination of flow resistance.prEN 13880-6, Hot applied joint sealants — Part 6: Test method for the preparation of samples for testing.EN 13880-7, Hot applied joint sealants — Part 7: Function testing of joint sealants.EN 13880-8, Hot applied joint se
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.