EN 13880-8:2003

Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

This European Standard describes a method for determining the joint sealant resistance to fuel spillage by calculating the change in mass, after immersion in the standard reference fuel.

Heiß verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zur Bestimmung der Gewichtsänderung nach Treibstofflagerung

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der Beständigkeit von Fugenmassen gegen ausgelaufenen Treibstoff, in dem die Änderung der Masse nach Lagerung in genormtem Bezugstreib-stoff berechnet wird.

Produits de scellement de joints appliqués à chaud - Partie 8 : Méthode d'essai pour la détermination de la variation de masse après immersion de produits de scellement résistants aux hydrocarbures

Cette Norme européenne décrit une méthode pour la détermination de la résistance des produits de scellement de joints lors du déversement d'hydrocarbures en calculant la variation de masse (le cas échéant), après immersion dans l'hydrocarbure de référence standard.

Toplo nanosljive tesnilne mase za stike – 8. del: Preskusna metoda za ugotavljanje sprememb teže tesnilnih mas za stike, odpornih proti gorivu, po namakanju v gorivu

General Information

• Status: Withdrawn
• Publication Date: 19-Aug-2003
• Withdrawal Date: 18-Dec-2018
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 19-Dec-2018
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 13880-8:2004 - Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

Relations

• Replaced By: EN 13880-8:2018 - Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
• Effective Date: 26-Dec-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplo nanosljive tesnilne mase za stike – 8. del: Preskusna metoda za ugotavljanje sprememb teže tesnilnih mas za stike, odpornih proti gorivu, po namakanju v gorivuHeiß verarbeitbare Fugenmassen - Teil 8: Prüfverfahren zur Bestimmung der Gewichtsänderung nach TreibstofflagerungProduits de scellement de joints appliqués a chaud - Partie 8 : Méthode d'essai pour la détermination de la variation de masse apres immersion de produits de scellement résistants aux hydrocarburesHot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13880-8:2003SIST EN 13880-8:2004en01-junij-2004SIST EN 13880-8:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13880-8August 2003ICS 93.080.20English versionHot applied joint sealants - Part 8: Test method for thedetermination of the change in weight of fuel resistance jointsealants after fuel immersionProduits de scellement de joints appliqués à chaud - Partie8: Méthode d'essai pour la détermination de la variation demasse après immersion de matières de scellementrésistantes aux hydrocarburesHeiß verarbeitbare Fugenmassen - Teil 8: Prüfverfahrenzur Bestimmung der Gewichtsänderung nachTreibstofflagerungThis European Standard was approved by CEN on 2 May 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13880-8:2003 ESIST EN 13880-8:2004
...