SIST EN 13687-5:2002

Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock

This European Standard is the fifth of a series of five parts to assess the thermal compatibility of products and systems for the repair and protection of concrete. This part is relevant only to surface protection systems, and specifies a method for determining the resistance of surface protection systems to high temperature shock.
This test method is also suitable for testing the resistance of surface protection systems against hot chemicals.

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Temperaturwechselverträglichkeit - Teil 5: Widerstand gegen Temperaturschock

Diese Europäische Norm ist der fünfte Teil einer Reihe von fünf Normen für den Nachweis der Temperaturwechselverträglichkeit von Oberflächenschutzsystem für die Instandsetzung von Beton. Dieser Teil gilt nur für Oberflächenschutzsysteme und legt ein Verfahren zur Bestimmung des Widerstandes von Oberflächenschutzsystemen gegen einen Temperaturschock mit hoher Temperaturdifferenz fest.
Dieses Prüfverfahren ist auch für die Prüfung des Widerstandes von Oberflächenschutzsystemen gegen heiße Chemikalien geeignet.

Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la compatibilité thermique - Partie 5: Résistance au choc de température

La présente Norme européenne est la cinquieme partie d'une norme en cinq parties destinée a évaluer la compatibilité thermique des produits et des systemes de réparation et de protection du béton. La présente partie n'est pertinente que pour les systemes de protection de surface. Elle spécifie une méthode permettant de déterminer la résistance des systemes de protection de surface a un choc de température élevé.
Cette méthode d'essai convient également pour mettre a l'essai la résistance des systemes de protection de surface aux produits chimiques chauds.

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij - Preskusne metode - Določevanje toplotne združljivosti - 5. del: Odpornost proti temperaturnemu šoku

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 91.080.40 - Concrete structures
• Technical Committee: BBB - Concrete, reinforced concrete and prestressed concrete
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: EN 13687-5:2002 - Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.URWLProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Bestimmung der Temperaturwechselverträglichkeit - Teil 5: Widerstand gegen TemperaturschockProduits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Détermination de la compatibilité thermique - Partie 5: Résistance au choc de températureProducts and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 5: Resistance to temperature shock91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 13687-5:2002SIST EN 13687-5:2002en01-september-2002SIST EN 13687-5:2002SLOVENSKI
STANDARD



SIST EN 13687-5:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13687-5February 2002ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Determination of thermalcompatibility - Part 5: Resistance to temperature shockProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Détermination dela compatibilité thermique - Partie 5: Résistance au choc detempératureProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Bestimmung der Temperaturwechselverträglichkeit - Teil 5:Widerstand gegen TempeaturwechselverträglichkeitThis European Standard was approved by CEN on 21 December 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13687-5:2002 ESIST EN 13687-5:2002



EN 13687-5:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Apparatus.45Preparation of test specimens.56Procedure.57Evaluation of results.68Test report.6Annex A (normative) Summary of temperatures and humidities for the curing, conditioning and testingof products and systems for protection and repair of concrete structures.7Annex B (informative) Testing device.8SIST EN 13687-5:2002



EN 13687-5:2002 (E)3ForewordThis document EN 13687-5:2002 has been prepared by Technical Committee CEN/TC 104 "Concrete and relatedproducts", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by August 2002, and conflicting national standards shall be withdrawn at the latest byDecember 2002.It has been elaborated by Subcommittee 8 “Products and systems for the protection and repair of concretestructures”, the secretariat of which is held by AFNOR.This Part of this European Standard is one of a series of inter-related parts dealing with the thermal compatibility ofproducts and systems for the repair and protection of concrete. This part is relevant only to surface protectionsystems. The other parts of this standard are :EN 13687-1, Products and systems for the protection and repair of concrete structures - Test methods -Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion.EN 13687-2, Products and systems for the protection and repair of concrete structures - Test methods -Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock).EN 13687-3, Products and systems for the protection and repair of concrete structures - Test methods -Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact.EN 13687-4, Products and systems for the protection and repair of concrete structures - Test methods -Determination of thermal compatibility - Part 4: Dry thermal cycling.Annex A is normative. Annex B is informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.SIST EN 13687-5:2002



EN 13687-5:2002 (E)41 ScopeThis European Standard is the fifth of a series of five parts to assess the thermal compatibility of products andsystems for the repair and protection of concrete. This part is relevant only to surface protection systems, andspecifies a method for determining the resistance of surface protection systems to high temperature shock.This test method is also suitable for testing the resistance of surface protection systems against hot chemicals.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 196-1, Methods of testing cement - Determination of strength.EN 1542, Products and systems for the protection and repair of concrete structures - Test methods - Measurementof bond strength by pull-off.EN 17
...