Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted - Cold drawn wire for the manufacture of thead inserts - D ≤ 3 mm

This document specifies the requirements relating to: Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) Consumable electrode remelted Cold drawn wire for the manufacture of the thread inserts D ≤ 3 mm for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Nickellegierung NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Drähte, kaltgezogen, für die Herstellung Mit selbstverzehrender Elektrode Umgeschmolzen von gewindeeinsätzen - D ≤ 3 mm

Diese Europäische Norm legt die Anforderungen an:
Hochwarmfeste Legierung NI-PH2801 (NiCr16Fe7Ti3Nb1Al1)
mit selbstverzehrender Elektrode umgeschmolzen
Drähte, kaltgezogen, für die Herstellung
von Gewindeeinsätzen
D ≤ 3 mm
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Refondu à l'électrode consommable - Fils étirés à froid pour la fabrication de filets rapportés - D ≤ 3 mm

La présente Norme européenne spécifie les exigences relatives à :
Alliage résistant à chaud NI-PH2801 (NiCr16Fe7Ti3Nb1Al1)
Refondu à l'électrode consommable
Fil étiré à froid pour la fabrication de filets rapportés
D ≤ 3 mm
pour applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Pretaljena s taljivo elektrodo - Hladno vlečena žica za proizvodnjo navojnih vložkov - D ≤ 3 mm

Ta dokument določa zahteve, ki se navezujejo na: toplotno odporna zlitina NI-PH2801 (NiCr16Fe7Ti3Nb1Al1), pretaljena s taljivo elektrodo, hladno vlečena žica za proizvodnjo navojnih vložkov, D ≤ 3 mm, za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
17-Dec-2019
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Dec-2019
Due Date
16-Feb-2020
Completion Date
18-Dec-2019

Buy Standard

Standard
SIST EN 3018:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 3018:2020
01-februar-2020
Aeronavtika - Toplotno odporna zlitina NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) -
Pretaljena s taljivo elektrodo - Hladno vlečena žica za proizvodnjo navojnih
vložkov - D ≤ 3 mm

Aerospace series - Heat resisting alloy NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) - Consumable

electrode remelted - Cold drawn wire for the manufacture of thead inserts - D ≤ 3 mm

Luft- und Raumfahrt - Hochwarmfeste Nickellegierung NI-PH2801

(NiCr16Fe7Ti3Nb1Al1) - Drähte, kaltgezogen, für die Herstellung Mit selbstverzehrender

Elektrode Umgeschmolzen von gewindeeinsätzen - D ≤ 3 mm
Série aérospatiale - Alliage résistant à chaud NI-PH2801 (NiCr16Fe7Ti3Nb1Al1) -

Refondu à l'électrode consommable - Fils étirés à froid pour la fabrication de filets

rapportés - D ≤ 3 mm
Ta slovenski standard je istoveten z: EN 3018:2019
ICS:
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
SIST EN 3018:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 3018:2020
---------------------- Page: 2 ----------------------
SIST EN 3018:2020
EN 3018
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2019
EUROPÄISCHE NORM
ICS 49.025.15
English Version
Aerospace series - Heat resisting alloy NI-PH2801
(NiCr16Fe7Ti3Nb1Al1) - Consumable electrode remelted -
Cold drawn wire for the manufacture of thread inserts - D
≤ 3 mm

Série aérospatiale - Alliage résistant à chaud NI- Luft- und Raumfahrt - Hochwarmfeste Legierung NI-

PH2801 (NiCr16Fe7Ti3Nb1Al1) - Refondu à l'électrode PH2801 (NiCr16Fe7Ti3Nb1Al1) - Mit

consommable - Fil étiré à froid pour la fabrication de selbstverzehrender Elektrode umgeschmolzen -

Drähte, kaltgezogen, für die Herstellung von
filets rapportés - D ≤ 3 mm
Gewindeeinsätzen - D ≤ 3 mm
This European Standard was approved by CEN on 14 January 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3018:2019 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3018:2020
EN 3018:2019 (E)
Contents Page

European foreword ...................................................................................................................................................... 3

Introduction .................................................................................................................................................................... 4

1 Scope .................................................................................................................................................................... 5

2 Normative references .................................................................................................................................... 5

3 Terms and definitions ................................................................................................................................... 5

4 Requirements ................................................................................................................................................... 5

Bibliography .................................................................................................................................................................... 8

---------------------- Page: 4 ----------------------
SIST EN 3018:2020
EN 3018:2019 (E)
European foreword

This document (EN 3018:2019) has been prepared by the Aerospace and Defence Industries Association

of Europe — Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of

ASD, prior to its presentation to CEN.

This document shall be given the status of a national standard, either by publication of an identical text

or by en
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.