SIST EN 6049-001:2015
(Main)Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification
This European Standard specifies the general characteristics, qualification and acceptance requirements for
protection sleeves in meta-aramid fibres for cable and cable bundles for aerospace application.
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 001: Technische Lieferbedingungen
Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 001: Spécification technique
Aeronavtika - Električni kabli, namestitev - Zaščitna obojka iz meta-aramidnih vlaken - 001. del: Tehnična specifikacija
Ta evropski standard določa splošne značilnosti ter zahteve glede kvalifikacije in sprejemljivosti za zaščitne obojke iz meta-aramidnih vlaken za kable in snope kablov, ki se uporabljajo v aeronavtiki.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HWDDUDPLGQLKLuft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 001: Technische LieferbedingungenSérie aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 001: Spécification techniqueAerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 6049-001:2015SIST EN 6049-001:2015en,fr,de01-september-2015SIST EN 6049-001:2015SLOVENSKI
STANDARD
SIST EN 6049-001:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 6049-001
May 2015 ICS 49.060 English Version
Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 001: Technical specification Série aérospatiale - Câbles électriques, installation - Gaine de protection en fibres méta-aramides - Partie 001: Spécification technique
Luft- und Raumfahrt - Elektrische Leitungen, Installation - Schutzschläuche aus Meta-Aramidfasern - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 28 June 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 6049-001:2015 ESIST EN 6049-001:2015
EN 6049-001:2015 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .6 4 Description.7 5 Design .9 6 Definition drawings and mass.9 7 Test methods . 10 8 Quality assurance . 11 8.1 Qualification. 11 8.2 Maintenance of qualification . 11 8.3 Production quality tests . 12 8.4 Production routine tests . 13 9 Designation . 13 10 Delivery conditions . 13 11 Packaging . 14 12 Marking . 14 13 Storage . 15 SIST EN 6049-001:2015
EN 6049-001:2015 (E) 3 Foreword This document (EN 6049-001:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 6049-001:2015
EN 6049-001:2015 (E) 4 1 Scope This European Standard specifies the general characteristics, qualification and acceptance requirements for protection sleeves in meta-aramid fibres for cable and cable bundles for aerospace application. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-214, Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse EN 2591-307, Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist EN 2825, Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density EN 2826, Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke EN 3197, Aerospace series - Design and installation of aircraft electrical and optical interconnection systems EN 3475-301, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length EN 3844-1, Aerospace series - Flammability of non metallic materials - Part 1: Small burner test, vertical - Determination of the vertical flame propagation EN 6049-003, Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 003: Braided, tubular, expandable - Product standard EN 6049-004, Aerospace series — Electrical cables, installation — Protection sleeve in meta-aramid fibres — Part 004: Braided, tubular, high expandable — Product standard 1) EN 6049-0051), Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 005: Sleeve flexible, post installation - Product standard EN 6049-006, Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006: Self-wrapping protective sleeve, flexible post installation - Product standard EN 6049-007, Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from - 55 °C to 260 °C - Product standard EN 6049-008, Aerospace series - Electrical cables, installation - Protective sleeves in meta-aramid fibres - Part 008: Self-wrapping shielded (EMI) protective sleeve with nickel copper braid, flexible post installation operating temperature from – 55 ˚C to 200 ˚C - Product standard
1) Published as ASD-STAN Prestandard at the date of publication of this standard. www.asd-stan.org SIST EN 6049-001:2015
EN 6049-001:2015 (E) 5 EN 6049-0091), Aerospace series — Electrical cables, installation — Protection sleeves in meta-aramid fibres — Part 009: Self-wrapping fire protection sleeve, flexible post installation operating temperature from − 55 °C to 260 °C — Product standard
EN 6059-2011), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 201: Visual examination
EN 6059-2021), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 202: Dimensions and mass
EN 6059-2031), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 203: Coverage
EN 6059-3011), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 301: Sun light exposure
EN 6059-3021), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 302: High temperature exposure
EN 6059-3031), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 303: Resistance to fluids
EN 6059-3051), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 305: Fluid absorption
EN 6059-3061), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 306: Mould growth
EN 6059-3081), Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 308: Rapid change of temperature EN 6059-309, Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 309: Fire resistance 2) EN 6059-4011), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 401: Expansion range
EN 6059-4021), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 402: Bending properties
EN 6059-4031), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 403: Scrape abrasion
EN 6059-4041), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 404: Tensile strength
EN 6059-4051), Aerospace series — Electrical cables, installation — Protection sleeves — Test methods — Part 405: Dynamic cut-through
EN 6059-4061), Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration
2) In preparation at the date of publication of this standard. SIST EN 6049-001:2015
EN 6049-001:2015 (E) 6 EN 6059-501, Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 501: Voltage proof test EN 6059-502, Aerospa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.