SIST EN 60794-1-24:2014
(Main)Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods
Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods
This part of IEC 60794 applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. The object of this standard is to define test procedures to be used in establishing uniform requirements for electrical requirements. Throughout the standard the wording “optical cable” may also include optical fibre units, microduct fibre units, etc.
Lichtwellenleiterkabel - Teil 1-24: Fachgrundspezifikation - Grundlegende Prüfverfahren für Lichtwellenleiterkabel - Elektrische Prüfverfahren
Câbles à fibres optiques - Partie 1-24: Spécification générique - Méthodes fondamentales d'essais applicables aux câbles optiques - Méthodes d'essais électriques
L'IEC 60794-1-24:2014 s'applique aux câbles à fibres optiques destinés à être utilisés dans les équipements de télécommunications et les dispositifs utilisant des techniques analogues, ainsi qu'aux câbles constitués de fibres optiques d'une part et de conducteurs électriques d'autre part. L'objet de la présente norme est de définir les procédures d'essai à utiliser en vue d'établir des exigences uniformes relatives aux exigences électriques. Tout au long de la norme, l'expression "câble optique" peut également inclure des ensembles de fibres optiques, des unités de fibres pour micro-conduits, etc.
Mots clés: câbles à fibres optiques destinés à être utilisés dans les équipements de télécommunications, procédures d'essai
Optični kabli - 1-24. del: Splošne specifikacije - Osnovni preskusni postopki za optične kable - Električne preskusne metode (IEC 60794-1-24:2014)
Ta del standarda IEC 60794 obravnava optične kable za uporabo s telekomunikacijsko opremo in napravami, ki uporabljajo podobne tehnike, ter kable s kombinacijo optičnih vlaken in električnih vodnikov. Cilj tega standarda je opredeliti preskusne postopke, ki jih je treba uporabiti pri določanju enotnih zahtev za električne zahteve. V standardu lahko besedna zveza »optični kabel« zajema tudi optične enote, mikrokanale itd.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60794-1-24:2014
01-oktober-2014
2SWLþQLNDEOLGHO 6SORãQHVSHFLILNDFLMH2VQRYQLSUHVNXVQLSRVWRSNL]D
RSWLþQHNDEOH(OHNWULþQHSUHVNXVQHPHWRGH ,(&
Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test
procedures - Electrical test methods
Ta slovenski standard je istoveten z: EN 60794-1-24:2014
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN 60794-1-24:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60794-1-24:2014
---------------------- Page: 2 ----------------------
SIST EN 60794-1-24:2014
EUROPEAN STANDARD EN 60794-1-24
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 33.180.10 Supersedes EN 60794-1-2:2003 (partially)
English Version
Optical fibre cables - Part 1-24: Generic specification - Basic
optical cable test procedures - Electrical test methods
(IEC 60794-1-24:2014)
Câbles à fibres optiques - Partie 1-24: Spécification Lichtwellenleiterkabel - Teil 1-24: Fachgrundspezifikation -
générique - Méthodes fondamentales d'essais applicables Grundlegende Prüfverfahren für Lichtwellenleiterkabel -
aux câbles optiques - Procédures - Méthodes d'essais Elektrische Prüfverfahren
électriques (IEC 60794-1-24:2014)
(CEI 60794-1-24:2014)
This European Standard was approved by CENELEC on 2014-06-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60794-1-24:2014 E
---------------------- Page: 3 ----------------------
SIST EN 60794-1-24:2014
EN 60794-1-24:2014 - 2 -
Foreword
The text of document 86A/1591/FDIS, future edition 1 of IEC 60794-1-24, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60794-1-24:2014.
The following dates are fixed:
(dop) 2015-03-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-06-17
standards conflicting with the
document have to be withdrawn
This document supersedes EN 60794-1-2:2003 (partially).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60794-1-24:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
1) 2)
IEC 60794-1-2:2003 NOTE Harmonized as EN 60794-1-2:2003 (not modified).
IEC 60794-1-20 NOTE Harmonized as EN 60794-1-20.
1)
Withdrawn.
2)
Superseded by EN 60794-1-22:2012, EN 60794-1-23:2012, EN 60794-1-2:2014, EN 60794-1-20:2014,
EN 60794-1-24:2014 and the future EN 60794-1-21.
---------------------- Page: 4 ----------------------
SIST EN 60794-1-24:2014
IEC 60794-1-24
®
Edition 1.0 2014-05
INTERNATIONAL
STANDARD
colour
inside
Optical fibre cables –
Part 1-24: Generic specification – Basic optical cable test procedures – Electrical
test methods
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
M
ICS 33.180.10 ISBN 978-2-8322-1576-0
Warning! Make sure that you obtained this publication from an authorized distributor.
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 5 ----------------------
SIST EN 60794-1-24:2014
– 2 – IEC 60794-1-24:2014 © IEC 2014
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Method H1: Short-circuit test (for OPGW and OPAC) . 5
3.1 Object . 5
3.2 Sample . 5
3.2.1 OPGW testing . 5
3.2.2 OPAC testing . 6
3.3 Apparatus . 6
3.4 Procedure . 7
3.4.1 OPGW testing . 7
3.4.2 OPAC testing . 7
3.4.3 Common procedure for OPGW and OPAC . 8
3.5 Requirements . 8
3.6 Details to be specified . 8
3.6.1 OPGW testing . 8
3.6.2 OPAC testing . 8
4 Method H2: Lightning test method for optical aerial cables along electric power
lines (OPGW and OPAC) . 8
4.1 Object . 8
4.2 General . 9
4.3 Sample . 9
4.4 Apparatus . 9
4.5 Procedure . 10
4.6 Requirements . 10
4.7 Details to be specified . 10
5 Method H3 – Electrical continuity test of cable metallic elements . 10
5.1 Object . 10
5.2 Sample . 10
5.3 Apparatus . 10
5.4 Procedure . 11
5.5 Requirements . 11
5.6 Details to be specified . 11
Bibliography . 12
Figure 1 – OPGW short-circuit test arrangement . 6
Figure 2 – OPAC short-circuit test arrangement . 7
Figure 3 – Lightning test arrangement . 9
Table 1 – Test parameters . 10
---------------------- Page: 6 ----------------------
SIST EN 60794-1-24:2014
IEC 60794-1-24:2014 © IEC 2014 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 1-24: Generic specification –
Basic optical cable test procedures –
Electrical test methods
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60794-1-24 has been prepared by subcommittee 86A: Fibres and
cables, of IEC technical committee 86: Fibre optics.
This edition of IEC 60794-1-24 cancels and replaces the electrical tests methods section of
the second edition of IEC 60794-1-2, published in 2003 (and subsequently replaced by the
third edition). It constitutes a technical revision.
It has been decided to split the second edition of IEC 60794-1-2 into six new documents:
– IEC 60794-1-2 : Cross reference table
– IEC 60794-1-20 : General and definitions
– IEC 60794-1-21 : Mechanical tests
– IEC 60794-1-22 : Environmental tests
---------------------- Page: 7 ----------------------
SIST EN 60794-1-24:2014
– 4 – IEC 60794-1-24:2014 © IEC 2014
– IEC 60794-1-23 : Cable elements
– IEC 60794-1-24 : Electrical tests
The text of this standard is based on the following documents:
FDIS Report on voting
86A/1591/FDIS 86A/1606/RVD
Full information on the voting for the approval of this standard can
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.