SIST EN 18007-1:2024
(Main)Electromagnetic pulse welding - Part 1: Welding knowledge, terminology and vocabulary
Electromagnetic pulse welding - Part 1: Welding knowledge, terminology and vocabulary
This document defines terms and definitions related to the electromagnetic pulse welding process. In this document, the term "aluminium" refers to aluminium and its alloys.
Schweißen und verwandte Verfahren - Elektromagnetisches Pulsschweißen - Teil 1: Schweißwissen, Terminologie und Begriffe
Dieses Dokument definiert Begriffe im Zusammenhang mit dem elektromagnetischen Pulsschweißen. Der Begriff "Aluminium" bezieht sich in diesem Dokument auf Aluminium und seine Legierungen.
Soudage par impulsion électromagnétique - Partie 1 : Connaissance, terminologie et vocabulaire du soudage
Le présent document définit les termes et les définitions relatifs au procédé de soudage par impulsion électromagnétique. Dans présent document, le terme « aluminium » se rapporte à l'aluminium et ses alliages.
Elektromagnetno utripno varjenje - 1. del: Znanje o varjenju, terminologija in slovar
Ta dokument določa izraze in definicije v zvezi z elektromagnetnim utripnim varjenjem. V tem dokumentu se izraz »aluminij« navezuje na aluminij in njegove zlitine.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Elektromagnetno utripno varjenje - 1. del: Znanje o varjenju, terminologija in
slovar
Electromagnetic pulse welding - Part 1: Welding knowledge, terminology and vocabulary
Schweißen und verwandte Verfahren - Elektromagnetisches Pulsschweißen - Teil 1:
Schweißwissen, Terminologie und Begriffe
Soudage par impulsion électromagnétique - Partie 1 : Connaissance, terminologie et
vocabulaire du soudage
Ta slovenski standard je istoveten z: EN 18007-1:2024
ICS:
01.040.25 Izdelavna tehnika (Slovarji) Manufacturing engineering
(Vocabularies)
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 18007-1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2024
EUROPÄISCHE NORM
ICS 01.040.25; 25.160.10
English Version
Electromagnetic pulse welding - Part 1: Welding
knowledge, terminology and vocabulary
Soudage par impulsion électromagnétique - Partie 1 : Elektromagnetisches Pulsschweißen - Teil 1:
Connaissance, terminologie et vocabulaire du soudage Schweißwissen, Terminologie und Begriffe
This European Standard was approved by CEN on 7 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 18007-1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Welding knowledge . 9
4.1 Process principles . 9
4.2 Process variants . 11
4.2.1 Electromagnetic pulse crimping . 11
4.2.2 Electromagnetic pulse welding of tubular products . 11
4.2.3 Electromagnetic pulse welding of sheet products . 13
4.3 Parameters . 13
4.4 Welding window . 15
4.5 Weld description . 17
4.6 Materials and material combinations. 18
4.7 Electromagnetic pulse welding equipment . 19
4.7.1 General . 19
4.7.2 Pulse generator . 19
4.7.3 Coils . 19
4.7.4 Features . 22
5 Health and safety . 22
Annex A (informative) Material combinations weldable by electromagnetic pulse welding . 23
Bibliography . 25
European foreword
This document (EN 18007-1:2024) has been prepared by Technical Committee CEN/TC 121 “Welding
and allied processes”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2025, and conflicting national standards shall
be withdrawn at the latest by January 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
The EN 18007 series of standards, under the general title Electromagnetic pulse welding, consists of the
following parts:
— Part 1: Welding knowledge, terminology and vocabulary,
— Part 2: Design of welded joints,
— Part 3: Qualification of welding operators and weld setters,
— Part 4: Specification and qualification of welding procedures,
— Part 5: Quality and inspection requirements.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
Electromagnetic pulse welding is an innovative solid-state welding technology that belongs to the group
of pressure welding processes and is based on the use of electromagnetic forces to deform, accelerate
and weld workpieces. No external heat source is used, the connection is only created by a high-velocity
impact.
The increasing use of the electromagnetic pulse welding process has created the need for a standard, to
ensure that the welding operations are carried out in the most effective manner and that appropriate
controls are performed on all aspects of the implementation.
To be effective, welded products should be free from problems in production and in service. To achieve
this goal, it is recommended to provide controls from the design phase through material selection, choice
of parameters, the fabrication itself, and inspection. For example, poor design can create serious and
costly difficulties in the workshop or in service. Incorrect process parameters and/or material selection
can result in welding defects. Welding procedures should be correctly formulated and approved to avoid
weld discontinuities. To ensure the manufacture of a quality product, management should understand
the causes of potential problems and implement appropriate inspection procedures and subsequent
quality measures. Supervision should be implemented to ensure that the specified quality is achieved.
1 Scope
This document defines terms and definitions related to the electromagnetic pulse welding process. In this
document, the term “aluminium” refers to aluminium and its alloys.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 25901 (all parts), Welding and allied processes — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in the ISO 25901 series and the
following apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
3.1
electromagnetic pulse welding
creation of a welded joint by impact using a pulsed electromagnetic field
3.2
electromagnetic pulse sheet welding
creation of a welded joint of sheets by impact using a pulsed electromagnetic field
3.3
electromagnetic pulse tube welding
creation of a welded joint of tubes by impact using a pulsed electromagnetic field
3.4
electromagnetic pulse crimping
creation of a crimp connection (mechanical joint) using electromagnetic forming
3.5
flyer sheet
flyer tube
sheet or tube that is accelerated by electromagnetic forces during the process (see Figure 1)
3.6
target sheet
target tube
sheet or tube that is stationary during the process (see Figure 1)
3.7
driver
auxiliary workpiece used for efficient acceleration of workpieces with low electrical conductivity
3.8
impact velocity
normal component (according to target sheet/tube surface) of the velocity of the flyer sheet/tube velocity
when it impacts with the target workpiece (see Figure 1)
3.9
collision point velocity
mean velocity parallel to the target workpiece at which the weld is created (see Figure 1)
Key
1 flyer
2 target
dd2− 1
Mean collision point velocity v = .
collision,mean
∆t
Figure 1 — Definition of characteristic velocities
3.10
impact angle
angle between flyer’s and target’s impact surface during the complete duration of the impact event (see
Figure 1)
3.11
jetting critical angle
angle at which a jet is created at the collision front
3.12
stand-off distance
gap
initial gap between the joining partners
Note 1 to entry: It is the distance by which the metals to be welded are separated from each other prior to the
welding process (see Figure 2).
3.13
free length
length between the flyer tube/sheet and the internal workpiece
Note 1 to entry: It is the part of the flyer (tube or sheet) that can freely move under the effect of the magnetic
forces (not obstructed by the support or a part of the target workpiece) (see Figure 2).
3.14
overlap of flyer and tool coil
work length [4]
length of work zone
distance that the flyer workpiece overlaps with the coil or field shaper (see Figure 2)
Key
1 Cu 1 mm
2 spacer 2
3 spacer 1
4 Al 1 mm
5 flat coil
a stand-off
b overlap
c free-length
Figure 2 — Schematic representation of the geometrical parameters of the electromagnetic
pulse welding process (sheet applications)
3.15
discharge energy
energy discharged into the coil as a result of the discharge of the capacitors, characterized as follows:
E= CV
where
𝐸𝐸 is the discharge energy (J)
𝐶𝐶 is the capacitance (F)
𝑉𝑉 is the charging voltage (V)
3.16
discharge current
current discharged into the coil as a result of the discharge of the capacitors
3.17
discharge current frequency
significant frequency of the current induced in the coil from 𝑡𝑡 until 𝑡𝑡 ; where the duration 𝑡𝑡
0 max,1 max,1
corresponds to the quarter of the period (noted T/4)
Note 1 to entry: Figure 3 illustrates this concept and presents the current discharge frequency equation.
Key
X time
Y current
Significant frequency f =
significant
4×∆t
max,l
Figure 3 — Pulsed current parameters
3.18
pulse repetition rate
number of pulses per unit of time
3.19
current rise time
time taken by the electromagnetic pulse to change from a specified low value to a specified maximum
value (Δ𝑡𝑡 in Figure 3)
max,l
3.20
skin effect
tendency of alternating current to distribute itself inside a conductor in such a way that the current
density is highest near the surface of the conductor
3.21
skin depth
depth at which eddy currents penetrate a materi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.