SIST EN 60794-3-10:2015

Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables (IEC 60794-3-10:2015)

This part of IEC 60794, which is a family specification, covers optical telecommunication
cables to be used in ducts or direct buried applications. The cable may also be used for
lashed aerial applications. Requirements of the sectional specification IEC 60794-3 for duct,
buried and aerial cables are applicable to cables covered by this standard.

Teil 3-10: Außenkabel - Familienspezifikation für LWL-Fernmeldekabel für Röhren- und direkte Erdverlegung sowie Befestigung an Freileitungen oder Seilen (IEC 60794-3-10:2015)

Câbles à fibres optiques - Partie 3-10: Câbles extérieurs - Spécification de famille pour les cables optiques de télécommunication destinés à être installés dans des conduites, directement enterrés ou attachés en aérien (IEC 60794-3-10:2015)

L'IEC 60794-3-10:2015 qui fait partie d'une spécification de famille, couvre les câbles optiques de télécommunication destinés à être utilisés dans des conduites ou à être directement enterrés. Les câbles peuvent également être attachés en aérien. Les exigences de la spécification intermédiaire IEC 60794-3 pour les câbles pour conduites, enterrés et attachés en aérien sont applicables aux câbles couverts par la présente norme. La présente troisième édition annule et remplace la deuxième édition publiée en 2009 dont elle constitue une révision technique. La présente édition contient les principales modifications techniques par rapport à l'édition précédente:
- la spécification a été simplifiée par établissement de correspondances avec l'IEC 60794-1-1, la série IEC 60794-3 et l'IEC 60794-1-2;
- la référence au tableau MICE dans la précédente Annexe A a été supprimée;
- les techniques d'installation de câbles attachés en aérien, telle que référencée dans la précédente Annexe B, a été supprimée pour être incluse dans la prochaine édition de l'IEC TR 62691.
Mots clés: câbles optiques de telecommunication, conduites ou à être directement enterrés, attachés en aérien

Optični kabli - 3-10. del: Zunanji kabli - Rodovna specifikacija za cevovodne in neposredno zakopane optične telekomunikacijske kable (IEC 60794-3-10:2015)

Ta del standarda IEC 60794, ki je skupinska specifikacija, zajema optične telekomunikacijske kable, ki se uporabljajo v kanalih ali se neposredno zakopljejo. Kabel je namenjen tudi povezani nadzemni uporabi. Zahteve področne specifikacije IEC 60794-3 za kable v kanalih, zakopane in nadzemne kable se uporabljajo za kable iz tega standarda.

General Information

• Status: Published
• Publication Date: 08-Sep-2015
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Mar-2015
• Due Date: 14-May-2015
• Completion Date: 09-Sep-2015
• Ref Project: EN 60794-3-10:2015 - Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cables

Relations

• Replaces: SIST EN 60794-3-10:2009 - Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried or lashed aerial optical telecommunication cable (IEC 60794-3-10:2009)
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60794-3-10:2015
01-oktober-2015
1DGRPHãþD
SIST EN 60794-3-10:2009
2SWLþQLNDEOLGHO=XQDQMLNDEOL5RGRYQDVSHFLILNDFLMD]DFHYRYRGQHLQ
QHSRVUHGQR]DNRSDQHRSWLþQHWHOHNRPXQLNDFLMVNHNDEOH,(&
Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly
buried or lashed aerial optical telecommunication cables (IEC 60794-3-10:2015)
Teil 3-10: Außenkabel - Familienspezifikation für LWL-Fernmeldekabel für Röhren- und
direkte Erdverlegung sowie Befestigung an Freileitungen oder Seilen (IEC 60794-3-
10:2015)
Câbles à fibres optiques - Partie 3-10: Câbles extérieurs - Spécification de famille pour
les cables optiques de télécommunication destinés à être installés dans des conduites,
directement enterrés ou attachés en aérien (IEC 60794-3-10:2015)
Ta slovenski standard je istoveten z: EN 60794-3-10:2015
ICS:
33.180.10 2SWLþQDYODNQDLQNDEOL Fibres and cables
SIST EN 60794-3-10:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60794-3-10:2015

---------------------- Page: 2 ----------------------

SIST EN 60794-3-10:2015


EUROPEAN STANDARD EN 60794-3-10

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2015
ICS 33.180.10 Supersedes EN 60794-3-10:2009
English Version
Optical fibre cables - Part 3-10: Outdoor cables - Family
specification for duct, directly buried or lashed aerial optical
telecommunication cables
(IEC 60794-3-10:2015)
Câbles à fibres optiques - Partie 3-10: Câbles extérieurs - Lichtwellenleiterkabel - Teil 3-10: Außenkabel -
Spécification de famille pour les cables optiques de Familienspezifikation für LWL-Fernmeldekabel für Röhren-
télécommunication destinés à être installés dans des und direkte Erdverlegung sowie Befestigung an
conduites, directement enterrés ou attachés en aérien Freileitungen oder Seilen
(IEC 60794-3-10:2015) (IEC 60794-3-10:2015)
This European Standard was approved by CENELEC on 2015-02-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60794-3-10:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60794-3-10:2015
EN 60794-3-10:2015 - 2 -

Foreword
The text of document 86A/1630/FDIS, future edition 3 of IEC 60794-3-10, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60794-3-10:2015.
The following dates are fixed:
(dop) 2015-11-12
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-02-12
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 60794-3-10:2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 60794-3-10:2015 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60794-3-10:2015
- 3 - EN 60794-3-10:2015
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.


Publication Year Title EN/HD Year

IEC 60793-2 -  Optical fibres -- EN 60793-2 -
Part 2: Product specifications - General
IEC 60794-1-1 -  Optical fibre cables -- EN 60794-1-1 -
Part 1-1: Generic specification - General
IEC 60794-1-2 -  Optical fibre cables -- EN 60794-1-2 -
Part 1-2: Generic specification - Cross
reference table for optical cable test
procedures
IEC 60794-1-21 -  Optical fibre cables -- EN 60794-1-21 -
Part 1-21: Generic specification - Basic
optical cable test procedures - Mechanical
tests methods
IEC 60794-1-22 2012 Optical fibre cables -- EN 60794-1-22 2012
Part 1-22: Generic specification - Basic
optical cable test procedures -
Environmental test methods
IEC 60794-3 2001 Optical fibre cables -- EN 60794-3 2002
Part 3: Sectional specification - Outdoor
cables
IEC 60811-202 -  Electric and optical fibre cables - Test EN 60811-202 -
methods for non-metallic materials --
Part 202: General tests - Measurement of
thickness of non-metallic sheath
IEC 60811-203 -  Electric and optical fibre cables - Test EN 60811-203 -
methods for non-metallic materials --
Part 203: General tests - Measurement of
overall dimensions
IEC 60811-604 -  Electric and optical fibre cables - Test EN 60811-604 -
methods for non-metallic materials --
Part 604: Physical tests - Measurement of
absence of corrosive components in filling
compounds

---------------------- Page: 5 ----------------------

SIST EN 60794-3-10:2015

---------------------- Page: 6 ----------------------

SIST EN 60794-3-10:2015




IEC 60794-3-10

®


Edition 3.0 2015-01




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Optical fibre cables –

Part 3-10: Outdoor cables – Family specification for duct, directly buried or

lashed aerial optical telecommunication cables




Câbles à fibres optiques –

Partie 3-10: Câbles extérieurs – Spécification de famille pour les câbles optiques


de télécommunication destinés à être installés dans des conduites, directement

enterrés ou attachés en aérien












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.180.10 ISBN 978-2-8322-2188-4



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60794-3-10:2015
– 2 – IEC 60794-3-10:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, symbols and abbreviations . 5
4 General requirements . 6
4.1 Optical fibres . 6
4.2 Cable element . 6
4.3 Optical fibre cable construction . 6
5 Details of family requirements and test conditions for optical fibre cable tests . 6
5.1 General . 6
5.2 Tensile performance . 6
5.2.1 Family requirements . 6
5.2.2 Test conditions . 6
5.3 Crush . 7
5.3.1 Family requirements . 7
5.3.2 Test conditions . 7
5.4 Impact. 7
5.4.1 Family requirements . 7
5.4.2 Test conditions . 7
5.5 Repeated bending . 7
5.5.1 Family requirements . 7
5.5.2 Test conditions . 7
5.6 Torsion . 8
5.6.1 Family requirements . 8
5.6.2 Test conditions . 8
5.7 Bend . 8
5.7.1 Family requirements . 8
5.7.2 Test conditions . 8
5.8 Temperature cycling . 8
5.8.1 Family requirements . 8
5.8.2 Test conditions . 8
5.9 Water penetration . 9
5.9.1 Family requirements . 9
5.9.2 Test conditions . 9
5.10 Ageing . 9
5.10.1 Family requirements . 9
5.10.2 Test conditions . 9
Annex A (normative) Blank detail specification and minimum requirements . 10
A.1 Blank detail specification . 10
A.2 Cable construction . 12
Bibliography . 13

Table A.1 – Cable description . 10
Table A.2 – Cable construction . 12

---------------------- Page: 8 ----------------------

SIST EN 60794-3-10:2015
IEC 60794-3-10:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

OPTICAL FIBRE CABLES –

Part 3-10: Outdoor cables – Family specification for duct, directly buried
or lashed aerial optical telecommunication cables

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodie
...