Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds

This Part 604 of IEC 60811 indicates the effect of the filling compound when in contact with the metallic parts of the cable.

Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene Werkstoffe - Teil 604: Physikalische Prüfungen - Messung des Nichtvorhandenseins von korrosiven Bestandteilen in Füllmassen

Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 604: Essais physiques - Mesure de l'absence de composants corrosifs dans les matières de remplissage

La CEI 60811-604:2012 caractérise l'effet de la matière de remplissage en contact avec les éléments métalliques du câble. La CEI 60811-604:2012 annule et remplace l'Article 8 de la CEI 60811-5-1:1990, qui est supprimée. L'ensemble des informations relatives aux remplacements figure dans l'Annexe A de la CEI 60811-100:2012. Aucune modification technique n'a été effectuée par rapport à l'édition précédente; voir cependant l'avant-propos de la CEI 60811-100:2012.   Cette publication doit être lue conjointement avec la CEI 60811-100:2012.

Električni in optični kabli - Preskuševalne metode za nekovinske materiale - 604. del: Meritve odsotnosti korozivnih komponent v polnilnih zmeseh

604. del standarda IEC 60811 navaja učinke polnilne zmesi pri stiku s kovinskimi deli kabla.

General Information

Status
Published
Publication Date
08-Jul-2012
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
19-Jun-2012
Due Date
24-Aug-2012
Completion Date
09-Jul-2012

Relations

Buy Standard

Standard
EN 60811-604:2012
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60811-604:2012
01-september-2012
(OHNWULþQLLQRSWLþQLNDEOL3UHVNXãHYDOQHPHWRGH]DQHNRYLQVNHPDWHULDOH
GHO0HULWYHRGVRWQRVWLNRUR]LYQLKNRPSRQHQWYSROQLOQLK]PHVHK
Electric and optical fibre cables - Test methods for non-metallic materials - Part 604:
Physical tests - Measurement of absence of corrosive components in filling compounds
Kabel, isolierte Leitungen und Glasfaserkabel - Prüfverfahren für nichtmetallene
Werkstoffe - Teil 604: Physikalische Prüfungen - Messung des Nichtvorhandenseins von
korrosiven Bestandteilen in Füllmassen
Câbles électriques et câbles à fibres optiques - Méthodes d'essai pour les matériaux non
-métalliques - Partie 604: Essais physiques - Mesure de l'absence de composants
corrosifs dans les matières de remplissage
Ta slovenski standard je istoveten z: EN 60811-604:2012
ICS:
29.035.01 Izolacijski materiali na Insulating materials in
splošno general
29.060.20 Kabli Cables
SIST EN 60811-604:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60811-604:2012

---------------------- Page: 2 ----------------------

SIST EN 60811-604:2012

EUROPEAN STANDARD
EN 60811-604

NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM

ICS 29.035.01; 29.060.20 Supersedes EN 60811-5-1:1999 (partially) + A1:2004 (partially)


English version


Electric and optical fibre cables -
Test methods for non-metallic materials -
Part 604: Physical tests -
Measurement of absence of corrosive components in filling compounds
(IEC 60811-604:2012)


Câbles électriques et à fibres optiques -  Kabel, isolierte Leitungen und
Méthodes d'essai pour les matériaux non- Glasfaserkabel -
métalliques - Prüfverfahren für nichtmetallene
Partie 604: Essais physiques - Werkstoffe -
Mesure de l'absence de composants Teil 604: Physikalische Prüfungen -
corrosifs dans les matières de Messung des Nichtvorhandenseins von
remplissage korrosiven Bestandteilen in Füllmassen
(CEI 60811-604:2012) (IEC 60811-604:2012)




This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60811-604:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60811-604:2012
EN 60811-604:2012 - 2 -

Foreword
The text of document 20/1313/FDIS, future edition 1 of IEC 60811-604, prepared by IEC/TC 20 "Electric
cables" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 60811-604:2012.

The following dates are fixed:
(dop) 2013-01-17
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-04-17

standards conflicting with the
document have to be withdrawn

This document supersedes Clause 8 of EN 60811-5-1:1999 + A1:2004 (partially). Full details of the
replacements are shown in Annex A of EN 60811-100:2012.
There are no technical changes with respect to EN 60811-5-1:1999 + A1:2004, but see the Foreword to
EN 60811-100:2012.
This standard is to be read in conjunction with EN 60811-100.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC)
Endorsement notice
The text of the International Standard IEC 60811-604:2012 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 60811-604:2012
- 3 - EN 60811-604:2012

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60811-100 2012 Electric and optical fibre cables - Test EN 60811-100 2012
methods for non-metallic materials -
Part 100: General

---------------------- Page: 5 ----------------------

SIST EN 60811-604:2012

---------------------- Page: 6 ----------------------

SIST EN 60811-604:2012



IEC 60811-604

®


Edition 1.0 2012-03




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Electric and optical fibre cables – Test methods for non-metallic materials –

Part 604: Physical tests – Measurement of absence of corrosive components

in filling compounds




Câbles électriques et à fibres optiques – Méthodes d’essai pour les matériaux

non-métalliques –


Partie 604: Essais physiques – Mesure de l’absence de composants corrosifs

dans les matières de remplissage












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX H


ICS 29.035.01; 29.060.20 ISBN 978-2-88912-997-3



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60811-604:2012
– 2 – 60811-604  IEC:2012
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Test method . 6
4.1 General . 6
4.2 Apparatus . 6
4.3 Test procedure . 6
4.4 Expression of results . 7
5 Test report. 7
Bibliography . 8

---------------------- Page: 8 ----------------------

SIST EN 60811-604:2012
60811-604  IEC:2012 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTRIC AND OPTICAL FIBRE CABLES –
TEST METHODS FOR NON-M
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.