Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation (ISO 4597-1:2005)

This part of ISO 4597 specifies a method of designation for epoxy resin hardeners and accelerators. The object of this designation method is to allocate to each commercial product a group of digits, called the "designation", giving in a coded form certain information on the product: chemical base, modifiers and solvents, viscosity and additives. Thus all products having similar properties and therefore likely to have the same uses will have the same designation, so aiding users in their choice if producers list the designation in their data sheets.

Kunststoffe - Härter und Beschleuniger für Epoxidharze - Teil 1: Kennzeichnung (ISO 4597-1:2005)

Dieser Teil von ISO 4597 legt ein Verfahren zur Kennzeichnung von Härtern und Beschleunigern für Epoxidharze fest.
Ziel dieses Kennzeichnungsverfahrens ist es, jedes handelsübliche Produkt durch „Kennzeichnungen“ festzuhalten, die in einem Code bestimmte Informationen über das Produkt enthalten: chemische Basis, Modifizierungsmittel und Lösemittel, Viskosität und Zusätze.
Da diese Produkte ähnliche Eigenschaften haben und deshalb wahrscheinlich bei der gleichen Anwendung die gleiche Kennzeichnung erhalten, werden Benutzer durch Kennzeichnungslisten von Herstellern in deren Datenblättern bei ihrer Auswahl unterstützt.

Plastiques - Durcisseurs et accélérateurs pour résines époxydes - Partie 1: Désignation (ISO 4597-1:2005)

L'ISO 4597-1:2005 spécifie une méthode de désignation des durcisseurs et des accélérateurs pour résines époxydes.
Le but de cette méthode de désignation est d´affecter à chaque produit commercialisé un groupe de chiffres, appelé «désignation» et représentant, d´une manière codée, un certain nombre de renseignements sur ce produit tels que: la structure chimique, les modificateurs et solvants, la viscosité et les additifs.
Ainsi, tous les produits ayant des caractéristiques voisines, et donc susceptibles d'avoir les mêmes utilisations, auront la même désignation, ce qui peut aider les utilisateurs dans leur choix si les fabricants prennent soin d´indiquer la désignation dans leurs notices commerciales.

Polimerni materiali - Utrjevala in pospeševala za epoksidne smole - 1. del: Označevanje (ISO 4597-1:2005)

General Information

Status
Published
Publication Date
05-Oct-2008
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Oct-2008
Due Date
06-Dec-2008
Completion Date
06-Oct-2008

RELATIONS

Buy Standard

Standard
SIST EN ISO 4597-1:2008
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 4597-1:2008
01-november-2008
1DGRPHãþD
SIST EN ISO 4597-1:2000
3ROLPHUQLPDWHULDOL8WUMHYDODLQSRVSHãHYDOD]DHSRNVLGQHVPROHGHO
2]QDþHYDQMH ,62

Plastics - Hardeners and accelerators for epoxy resins - Part 1: Designation (ISO 4597-

1:2005)

Kunststoffe - Härter und Beschleuniger für Epoxidharze - Teil 1: Kennzeichnung (ISO

4597-1:2005)

Plastiques - Durcisseurs et accélérateurs pour résines époxydes - Partie 1: Désignation

(ISO 4597-1:2005)
Ta slovenski standard je istoveten z: EN ISO 4597-1:2008
ICS:
83.040.30 Pomožni materiali in aditivi Auxiliary materials and
za polimerne materiale additives for plastics
83.080.10 Duromeri Thermosetting materials
SIST EN ISO 4597-1:2008 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4597-1:2008
---------------------- Page: 2 ----------------------
SIST EN ISO 4597-1:2008
EUROPEAN STANDARD
EN ISO 4597-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2008
ICS 83.080.10 Supersedes EN ISO 4597-1:1997
English Version
Plastics - Hardeners and accelerators for epoxy resins - Part 1:
Designation (ISO 4597-1:2005)

Plastiques - Durcisseurs et accélérateurs pour résines Kunststoffe - Härter und Beschleuniger für Epoxidharze -

époxydes - Partie 1: Désignation (ISO 4597-1:2005) Teil 1: Kennzeichnung (ISO 4597-1:2005)

This European Standard was approved by CEN on 30 July 2008.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4597-1:2008: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4597-1:2008
EN ISO 4597-1:2008 (E)
Contents Page

Foreword..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 4597-1:2008
EN ISO 4597-1:2008 (E)
Foreword

The text of ISO 4597-1:2005 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the

International Organization for Standardization (ISO) and has been taken over as EN ISO 4597-1:2008 by

Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by February 2009, and conflicting national standards shall be withdrawn

at the latest by February 2009.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 4597-1:1997.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
Endorsement notice

The text of ISO 4597-1:2005 has been approved by CEN as a EN ISO 4597-1:2008 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 4597-1:2008
---------------------- Page: 6 ----------------------
SIST EN ISO 4597-1:2008
INTERNATIONAL ISO
STANDARD 4597-1
Second edition
2005-10-01
Plastics — Hardeners and accelerators
for epoxy resins —
Part 1:
Designation
Plastiques — Durcisseurs et accélérateurs pour résines époxydes —
Partie 1: Désignation
Reference number
ISO 4597-1:2005(E)
ISO 2005
---------------------- Page: 7 ----------------------
SIST EN ISO 4597-1:2008
ISO 4597-1:2005(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2005

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4597-1:2008
ISO 4597-1:2005(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.