SIST EN 60794-3-12:2006

Optical fibre cables -- Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling

This part of IEC 60794 is a detailed specification. It presents the detailed requirements specific to duct and directly buried optical telecommunication cables for use in premises cabling to ensure compatibility with ISO 11801 [1]1). The requirements of the family specification IEC 60794-3-10 are applicable to cables covered by this standard.

Lichtwellenleiterkabel -- Teil 3-12: LWL-Außenkabel - Bauartspezifikation für LWL-Fernmelde-Erd- und Röhrenkabel für anwendungsneutrale Standortverkabelung

Câbles à fibres optiques -- Partie 3-12: Câbles extérieurs - Spécification particulière pour les câbles optiques de télécommunication destinés à être installés dans les conduites ou à être directement enterrés et utilisés dans le câblage de locaux

Présente les exigences particulières spécifiques aux câbles optiques de télécommunications destinés à être installés dans des conduites ou à être directement enterrés et utilisés dans les câblages de locaux. Le but est d'assurer la compatibilité avec l'ISO 11801. Les exigences contenues dans la spécification de famille EN 60794-3-10 sont applicables aux câbles couverts par la présente norme.

Optični kabli – 3-12. del: Kabli za zunanjo montažo – Podrobna specifikacija za optične telekomunikacijske kable v kanalih ali neposredno zakopane za okablenje prostorov (IEC 60794-3-12:2005)

General Information

• Status: Withdrawn
• Publication Date: 30-Sep-2006
• Withdrawal Date: 09-Dec-2015
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: iTEL - Communication cables
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-Dec-2015
• Due Date: 02-Jan-2016
• Completion Date: 10-Dec-2015
• Ref Project: EN 60794-3-12:2006 - Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling

Relations

• Revised: SIST EN 60794-3-12:2013 - Optical fibre cables - Part 3-12: Outdoor optical fibre cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
• Effective Date: 06-May-2014
• Replaced By: SIST EN 60794-3-12:2013 - Optical fibre cables - Part 3-12: Outdoor optical fibre cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
• Effective Date: 07-Jun-2022
• Revised: SIST EN 60794-3-12:2013 - Optical fibre cables - Part 3-12: Outdoor optical fibre cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
• Effective Date: 16-Nov-2012
• Replaced By: SIST EN 60794-3-12:2013 - Optical fibre cables - Part 3-12: Outdoor optical fibre cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI SIST EN 60794-3-12:2006

STANDARD
oct 2006
Optični kabli – 3-12. del: Kabli za zunanjo montažo – Podrobna specifikacija
za optične telekomunikacijske kable v kanalih ali neposredno zakopane za
okablenje prostorov (IEC 60794-3-12:2005)
Optical fibre cables – Part 3-12: Outdoor cables – Detailed specification for duct
and directly buried optical telecommunication cables for use in premises cabling
(IEC 60794-3-12:2005)
ICS 33.180.10 Referenčna številka
SIST EN 60794-3-12:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60794-3-12

NORME EUROPÉENNE
May 2006
EUROPÄISCHE NORM

ICS 33.180.10


English version


Optical fibre cables
Part 3-12: Outdoor cables -
Detailed specification for duct and directly buried optical
telecommunication cables for use in premises cabling
(IEC 60794-3-12:2005)


Câbles à fibres optiques Lichtwellenleiterkabel
Partie 3-12: Câbles extérieurs - Teil 3-12: LWL-Außenkabel -
Spécification particulière pour les câbles Bauartspezifikation für
optiques de télécommunication destinés LWL-Fernmelde-Erd- und Röhrenkabel für
à être installés dans les conduites anwendungsneutrale Standortverkabelung
ou à être directement enterrés (IEC 60794-3-12:2005)
et utilisés dans le câblage de locaux
(CEI 60794-3-12:2005)




This European Standard was approved by CENELEC on 2005-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60794-3-12:2006 E

---------------------- Page: 2 ----------------------

EN 60794-3-12:2006 - 2 -
Foreword
The text of document 86A/1000/FDIS, future edition 1 of IEC 60794-3-12, prepared by SC 86A, Fibres
and cables, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 60794-3-12 on 2005-12-01.
This standard shall be used in conjunction with EN 60794-1-1:2002, EN 60794-1-2:2003, EN 60794-3:2002
and EN 60794-3-10:2002.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2008-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60794-3-12:2005 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60794-3-12:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
IEC 60793-2-10 2002 Optical fibres EN 60793-2-10 2002
Part 2-10: Product specifications -
Sectional specification for category A1
multimode fibres

IEC 60793-2-50 2004 Part 2-50: Product specifications - EN 60793-2-50 2004
Sectional specification for class B
single-mode fibres

IEC 60794-1-1 2001 Optical fibre cables EN 60794-1-1 2002
Part 1-1: Generic specification - General

IEC 60974-1-2 2003 Part 1-2: Generic specification - Basic EN 60974-1-2 2003
optical cable test procedures

IEC 60794-3 2001 Part 3: Sectional specification - Outdoor EN 60794-3 2002
cables

IEC 60794-3-10 2002 Part 3-10: Outdoor cables - Family EN 60794-3-10 2002
specification for duct and directly buried
optical telecommunication cables







1)
EN 60793-2-10 is superseded by EN 60793-2-10:2004, which is based on IEC 60793-2-10:2004.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



60794-3-12
INTERNATIONAL


Première édition
STANDARD

First edition

2005-06


Câbles à fibres optiques –
Partie 3-12:
Câbles extérieurs –
Spécification particulière pour les câbles optiques
de télécommunication destinés à être installés
dans des conduites ou à être directement enterrés
et utilisés dans le câblage de locaux

Optical fibre cables –
Part 3-12:
Outdoor cables –
Detailed specification for duct and directly buried
optical telecommunication cables for use in
premises cabling
 IEC 2005 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
J
PRICE CODE
International Electrotechnical Commission

Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60794-3-12  IEC:2005 – 3 –
CONTENTS
FOREWORD.5

1 Scope.11
2 Normative references .11
3 General requirements .13
4 Particular requirements .13
4.1 Environmental requirements .13
4.1.1 Temperature cycling .13
4.2 Transmission requirements .13
4.2.1 Attenuation of cabled fibre.13
4.2.2 Fibre bandwidth requirements.15

Bibliography.17

Table 1 – Multimode maximum cable attenuation coefficient (dB/km) .15
Table 2 – Single-mode maximum cable attenuation coefficient (dB/km) .15
Table 3 – Minimum multimode fibre bandwidth (MHz⋅km).15

---------------------- Page: 6 ----------------------

60794-3-12  IEC:2005 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

OPTICAL FIBRE CABLES –

Part 3-12: Outdoor cables –
Detailed specification for duct and directly buried optical
telecommunication cables for use in premises cabling


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committ
...