SIST EN 301 175 V1.1.1:2003
(Main)Cordless Terminal Mobility (CTM); Phase 1; Service description
Cordless Terminal Mobility (CTM); Phase 1; Service description
To produce an ETS stage 1 description for phase 1 of the CTM service.
Mobilnost brezvrvičnega terminala (CTM) ¬¬– Faza 1 – Opis storitve
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HCordless Terminal Mobility (CTM); Phase 1; Service description33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)33.050.01Telekomunikacijska terminalska oprema na splošnoTelecommunication terminal equipment in generalICS:Ta slovenski standard je istoveten z:EN 301 175 Version 1.1.1SIST EN 301 175 V1.1.1:2003en01-december-2003SIST EN 301 175 V1.1.1:2003SLOVENSKI
STANDARD
SIST EN 301 175 V1.1.1:2003
EN 301 175 V1.1.1 (1998-08)European Standard (Telecommunications series)Cordless Terminal Mobility (CTM);Phase 1;Service descriptionSIST EN 301 175 V1.1.1:2003
ETSIEN 301 175 V1.1.1 (1998-08)2ReferenceDEN/NA-020039 (avo00ico.PDF)KeywordsCTM, DECT, mobility, stage 1ETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frhttp://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 175 V1.1.1:2003
ETSIEN 301 175 V1.1.1 (1998-08)3ContentsIntellectual Property Rights.6Foreword.61Scope.72Normative references.83Definitions.84 Abbreviations.105Description.105.1Core service features.105.1.1Numbering.105.1.2Outgoing call.115.1.3Emergency call.115.1.4Incoming call.115.1.5Roaming.115.1.6Handover.115.1.7Security.115.1.7.1Terminal authentication.125.1.7.2Network authentication.125.1.7.3Encryption.125.1.8Service profile.125.2Optional service features.125.2.1Service profile modification.125.2.2Service profile interrogation.126Procedures.136.1Provision and withdrawal.136.2Normal procedures.136.2.1Registration, deregistration and erasure.136.2.1.1Core requirements.136.2.1.2Optional requirements.136.2.2Activation and deactivation.146.2.2.1Core requirements.146.2.2.2Optional requirements.146.2.3Invocation and operation.146.2.3.1Core requirements.146.2.3.2Optional requirements.156.2.4Interrogation.156.2.4.1Core requirements.156.2.4.2Optional requirements.156.3Exceptional procedures.156.3.1Registration and erasure.156.3.1.1Core requirements.156.3.1.2Optional requirements.156.3.2Activation and deactivation.156.3.2.1Core requirements.156.3.2.2Optional requirements.156.3.3Invocation and operation.166.3.3.1Core requirements.166.3.3.2Optional requirements.166.3.4Interrogation.166.3.4.1Core requirements.166.3.4.2Optional requirements.167Interworking requirements.177.1Interworking between public networks providing the CTM service.17SIST EN 301 175 V1.1.1:2003
ETSIEN 301 175 V1.1.1 (1998-08)47.1.1Public CTM user roams into a visited public network.177.2Interworking with private networks.177.2.1Public CTM user roams into a Private Integrated Service Network (PISN) area.177.2.2Private CTM user roams into a public CTM network area.187.3Interworking with networks not providing the CTM service.187.4Co-operation between network operators and service providers.188Interaction with ISDN supplementary services.188.1Number identification services.188.1.1Calling line identification presentation.188.1.2Calling line identification restriction.198.1.3Connected line identification presentation.198.1.4Connected line identification restriction.198.2Closed user group.198.3Call completion services.198.3.1Completion of calls to busy subscriber.198.3.2Completion of calls on no reply.198.4Malicious call identification.199Interaction with other services.199.1Universal Personal Telecommunication (UPT).1910Applicability of supplementary services to the CTM service.20Annex A (normative):CFNRc supplementary service.21A.1Scope.21A.2Normative references.21A.3Definitions.21A.4Symbols and abbreviations.22A.5Description.22A.6Procedures.23A.6.1Provision and withdrawal.23A.6.2Normal procedures.23A.6.2.1Activation, deactivation, registration and erasure.23A.6.2.1.1Activation.23A.6.2.1.2Deactivation.23A.6.2.1.3Registration.23A.6.2.1.4Erasure.23A.6.2.2Invocation and operation.24A.6.2.2.1Served user's view.24A.6.2.2.2Forwarded-to user's view.24A.6.2.2.3Calling user's view.24A.6.2.3Interrogation.24A.6.3Exceptional procedures.25A.6.3.1Activation, deactivation, registration and erasure.25A.6.3.1.1Activation.25A.6.3.1.2Deactivation.25A.6.3.1.3Registration.25A.6.3.1.4Erasure.25A.6.3.2Invocation and operation.25A.6.3.3Interrogation.26A.7Intercommunication considerations.26A.7.1Interworking with non-ISDNs.26A.7.2Interworking with private ISDN.26A.8Interaction with other (supplementary) services.26A.8.1Number identification services.27A.8.1.1Calling line identification restriction.27SIST EN 301 175 V1.1.1:2003
ETSIEN 301 175 V1.1.1 (1998-08)5A.8.1.2Connected line identification restriction.27A.8.2Diversion services.27A.8.2.1Call forwarding on not reachable.27A.8.3Remote control service.27History.28SIST EN 301 175 V1.1.1:2003
ETSIEN 301 175 V1.1.1 (1998-08)6Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee NetworkAspects (NA).In analogy with CCITT Recommendations I.130 [6], the first stage of the following three level structure is used todescribe the telecommunications services as provided by European public telecommunications operators:-Stage 1: is an overall service description, from the service subscriber’s and user’s standpoint;-Stage 2: identifies the functional capabilities and information flows needed to support the service described instage 1; and-Stage 3: defines the signalling system protocols and switching functions needed to implement the servicedescribed in stage 1.The present document details the stage 1 aspects (overall service description) for the Cordless Terminal Mobility (CTM)service, taking into account the various network architectures, e.g., Intelligent Network (IN).The application of stage 2 and stage 3 may be different when the service is supported on an IN environment.National transposition datesDate of adoption of this EN:7 August 1998Date of latest announcement of this EN (doa):30 November 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 May 1999Date of withdrawal of any conflicting National Standard (dow):31 May 1999SIST EN 301 175 V1.1.1:2003
ETSIEN 301 175 V1.1.1 (1998-08)71ScopeThe present document defines the stage 1 service description for phase 1 of the Cordless Terminal Mobility (CTM)service. Stage 1 is an overall service description, primarily from the service subscriber’s and user’s point of view, butdoes not deal with the details of the human interface itself. The present document includes information applicable tonetwork operators and terminal, switch and database manufacturers.The present document specifies the requirements where the service is provided to the CTM user via atelecommunications network that is either the pan-European Integrated Services Digital Network (ISDN) or a PublicSwitched Telephone Network (PSTN) as provided by European public telecommunications operators.The present document includes interworking requirements for cases where users in a call are located on differentnetworks.The provision of the CTM service on mobile networks is outside the scope of the present document.The present document contains the core requirements for phase 1 of the Cordless Terminal Mobility (CTM) service. Aservice may be provided on the basis of these core requirements alone.The present document also documents some optional service features which may be used to enhance the service.Furthermore, additional functionalities not documented in the present document may be implemented. The requirementsof which are considered outside of the scope of the present document and consequently outside the scope of thecorresponding stage 2 and stage 3 standards. Such additional functionality may be on a network-wide basis, or particularto one CTM user or a group of CTM users. Such additional functionality does not compromise conformance to the corerequirements of the service.Charging principles are outside the scope of the present document, unless specific service requirements are stated. Theserequirements deal with the allocation of certain call charges to particular CTM users.Interactions with services/supplementary services not listed in clauses 8 and 9 are outside the scope of the presentdocument.The Cordless Terminal Mobility (CTM) service allows users of cordless terminals to be mobile within and betweennetworks. Where radio coverage is provided and the cordless terminal has appropriate access rights the CTM user isable to make calls from, and to receive calls at, any location within the fixed public and/or private networks, and maymove without interruption of a call in progress.Phase 1 of the Cordless Terminal Mobility (CTM) service is applicable to the telephony 3,1 kHz teleservice (see ETS300 111 [2]). Phase 1 of the CTM service is also applicable to the speech bearer service (see ETS 300 109 [3]) and the3,1 kHz audio bearer service (see ETS 300 110 [4]).If the present document is applicable to the stage 2 and stage 3 standards for the phase 1 of the CTM service, where thetext indicates the status of a requirement (i.e. as strict command or prohibition, as authorization leaving freedom, as acapability or a possibility), this shall be reflected in the relevant stage 2 and stage 3 standards. Otherwise, the status of arequirement shall be reflected in the relevant standards for the underlying protocols. Furthermore, conformance to thepresent document is either met by:-conforming to the stage 3 standards; or-implicitly covered by conforming to the standards for the underlying protocols,with the field of application appropriate to the equipment being implemented. Therefore no method of testing isprovided for the present document.SIST EN 301 175 V1.1.1:2003
ETSIEN 301 175 V1.1.1 (1998-08)82Normative referencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]ETS 300 345 (1994): "Integrated Services Digital Network (ISDN); Interworking between publicISDNs and private ISDNs for the provision of telecommunication services; General aspects".[2]ETS 300 111 (1992): "Integrated Services Digital Network (ISDN); Telephony 3,1 kHzteleservice; service description".[3]ETS 300 109 (1992): "Integrated Services Digital Network (ISDN); Circuit-mode 64 kbit/s 8 kHzstructured bearer service category usable for speech information transfer; Service description".[4]ETS 300 110 (1992): "Integrated Services Digital Network (ISDN); Circuit-mode 64 kbit/s 8 kHzstructured bearer service category usable for 3,1 kHz audio information transfer; Servicedescription".[5]CCITT Recommendation E.164 (1991): "Numbering plan for the ISDN era".[6]CCITT Recommendation I.130 (1988): "Method for the characterization of telecommunicationservices supported by an ISDN and network capabilities of an ISDN".[7]CCITT Recommendation I.112 (1988): "Vocabulary of terms for ISDNs".[8]CCITT Recommendation I.210 (1988): "Principles of telecommunication services supported by anISDN and the means to describe them".[9]CCITT Recommendation Q.9 (1988): "Vocabulary of switching and signalling terms".3DefinitionsFor the purposes of the present document, the following definitions apply:authentication: A security mechanism allowing the verification of the provided identity.access rights: An indication that the cordless terminal has appropriate access allowance to the CTM service.NOTE 1:This definition does not refer to any specific access technology.access rights identity: An identity which is globally unique to a service provider and which shows the access rightsrelated to this service provider.Basic Call (procedures): The procedures by which a call (as an instance of a basic telecommunication service) isestablished and terminated.NOTE 2:Emergency call is not a basic call.cordless terminal: A physical entity that provides access to the telecommunication services of a network via a radiointerface.SIST EN 301 175 V1.1.1:2003
ETSIEN 301 175 V1.1.1 (1998-08)9core service feature: Particular service feature fundamental to the telecommunication service, i.e., in the absence of thisservice feature, the telecommunication service does not make sense as a commercial offering to the service subscriber.coverage area: The area within the radio coverage area in which the user has subscribed to use the CTM service.CTM identity: The identity by which a user is known to the CTM service providers and networks supporting CTM, andit is used for flexibility and security purposes. The CTM identity identifies a CTM user unambiguously. The CTMidentity does not need to be known by users.CTM number: A number that uniquely and unambiguously identifies each user. It is used by a calling party to reach theCTM user. The number is independent of the calling terminal, network or service used and it is an E.164 number.E.164 number: A number conforming to the numbering plan and structure specified in CCITT RecommendationE.164 [5].forwarded-to number: A number to which the call is redirected as a result of call forwarding.handover: The process by which a call in progress is maintained when the CTM user moves with the cordless terminalwith a call in progress within a network where continuous radio coverage is provided.location area: The radio coverage area in which a cordless terminal may receive calls as a result of a single locationregistration.location registration: The process whereby the position of a CTM terminal is determined to the level of one locationarea.network operator: An entity that provides the network operating elements and resources for the execution of the CTMservice.not reachable: The status in the network when an incoming call is offered to a cordless terminal but the cordlessterminal is out of radio coverage, switched off or there is radio congestion.optional service feature: A service feature added to core feature to optionally enhance a service offering.radio coverage: The area in which cordless terminals may be used to establish and maintain telecommunicationservices via the radio base stations supported by the network supporting the CTM service.NOTE 3:The radio coverage supported by an individual network supporting the CTM service may be continuous ordiscontinuous, i.e. it may correspond to the complete geographical territory served by the network or itmay not.In the case of discontinuous radio coverage, the areas of radio coverage may consist of individual radiocells, serving for example isolated houses or very small businesses, or cordless islands consisting of acollection of radio cells providing continuous coverage of larger areas.The radio coverage supported by a network supporting the CTM service may overlap with the radiocoverage supported by one or more other networks supporting the CTM service or it may becomplemen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.