SIST EN ISO 28764:2012
(Main)Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2008)
Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764:2008)
ISO 28764:2008 specifies a method for the production of specimens suitable for testing vitreous and porcelain enamel coatings.
It specifies two different specimens:
- specimens taken from production articles;
- specially produced specimens.
Emails und Emaillierungen - Herstellung von Proben zur Prüfung von Stahlblech-Emails, Aluminium-Emails und Gusseisen-Emails (ISO 28764:2008)
Diese Internationale Norm legt ein Verfahren zur Herstellung von Proben fest, die für die Prüfung von
Emailschichten geeignet sind.
Sie legt zwei unterschiedliche Probenarten fest:
- Proben, entnommen von Gegenständen aus dem Herstellungsprozess;
- speziell angefertigte Proben.
ANMERKUNG Wenn der Masseverlust je Flächeneinheit der Emailschicht quantitativ zu bestimmen ist, können nur
speziell angefertigte Proben verwendet werden, weil durch Proben, die aus emaillierten Gegenständen entnommen
werden, die Genauigkeit des Prüfverfahrens verringert werden kann.
Émaux vitrifiés - Production d'éprouvettes pour l'essai des émaux sur la tôle d'acier, la tôle d'aluminium et la fonte (ISO 28764:2008)
L'ISO 28764:2008 spécifie une méthode de production d'échantillons appropriés aux essais des revêtements émaillés vitrifiés.
Elle distingue deux échantillons différents:
les échantillons prélevés sur un produit de série;
les échantillons fabriqués spécialement.
Steklasti in porcelanski emajli - Izdelovanje vzorcev za preskušanje emajlov na jekleni pločevini, aluminijasti pločevini in železovi litini (ISO 28764:2008)
Ta mednarodni standard določa metodo za izdelavo vzorcev, primernih za preskušanje steklastih in porcelanskih emajlnih prevlek. Določa dvoje različnih vzorcev: - vzorci, vzeti iz proizvodnih izdelkov; - posebej izdelani vzorci.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 28764:2012
01-januar-2012
1DGRPHãþD
SIST EN 15206:2007
6WHNODVWLLQSRUFHODQVNLHPDMOL,]GHORYDQMHY]RUFHY]DSUHVNXãDQMHHPDMORYQD
MHNOHQLSORþHYLQLDOXPLQLMDVWLSORþHYLQLLQåHOH]RYLOLWLQL ,62
Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet
steel, sheet aluminium and cast iron (ISO 28764:2008)
Emails und Emaillierungen - Herstellung von Proben zur Prüfung von Stahlblech-Emails,
Aluminium-Emails und Gusseisen-Emails (ISO 28764:2008)
Émaux vitrifiés - Production d'éprouvettes pour l'essai des émaux sur la tôle d'acier, la
tôle d'aluminium et la fonte (ISO 28764:2008)
Ta slovenski standard je istoveten z: EN ISO 28764:2011
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 28764:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 28764:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 28764:2012
EUROPEAN STANDARD
EN ISO 28764
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2011
ICS 25.220.50 Supersedes EN 15206:2007
English Version
Vitreous and porcelain enamels - Production of specimens for
testing enamels on sheet steel, sheet aluminium and cast iron
(ISO 28764:2008)
Émaux vitrifiés - Production d'éprouvettes pour l'essai des Emails und Emaillierungen - Herstellung von Proben zur
émaux sur la tôle d'acier, la tôle d'aluminium et la fonte Prüfung von Stahlblech-Emails, Aluminium-Emails und
(ISO 28764:2008) Gusseisen-Emails (ISO 28764:2008)
This European Standard was approved by CEN on 3 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28764:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 28764:2012
EN ISO 28764:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 28764:2012
EN ISO 28764:2011 (E)
Foreword
The text of ISO 28764:2008 has been prepared by Technical Committee ISO/TC 107 “Metallic and other
inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 28764:2011 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2011, and conflicting national standards shall be
withdrawn at the latest by September 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15206:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 28764:2008 has been approved by CEN as a EN ISO 28764:2011 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 28764:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 28764:2012
INTERNATIONAL ISO
STANDARD 28764
First edition
2008-10-15
Vitreous and porcelain enamels —
Production of specimens for testing
enamels on sheet steel, sheet aluminium
and cast iron
Émaux vitrifiés — Production d'éprouvettes pour l'essai des émaux sur
la tôle d'acier, la tôle d'aluminium et la fonte
Reference number
ISO 28764:2008(E)
©
ISO 2008
---------------------- Page: 7 ----------------------
SIST EN ISO 28764:2012
ISO 28764:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 28764:2012
ISO 28764:2008(E)
Contents Page
Foreword .iv
1 Scope .1
2 Normative references.1
3 Designation .1
4 Specimens from production articles .1
4.1 Requirements for the used articles .1
4.2 Shape and dimension requirements.2
4.3 Preparation.2
5 Specially produced specimens.2
5.1 Shape, dimension and substrate requirements .2
5.2 Enamelling of specimens .3
5.3 Surface of enamelled specimens.4
Bibliography.5
© ISO 2008 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 28764:2012
ISO 28764:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 28764 was prepared by the European Committee for Standardization (CEN) (as EN 15206) and was
adopted, under a special “fast-track procedure”, by Technical Committee ISO/TC 107, Metallic and other
inorganic coatings, in parallel with its approval by the ISO member bodies.
It cancels and replaces ISO 2723:1995, ISO 2724:1973 and ISO 13804:1999, which have been technically
revised.
iv © ISO 2008 – All rights reserved
---------------------- Page:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.