SIST EN 1015-6:1999
(Main)Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar
This European Standard specifies a method for the determining the bulk density of fresh mortars including those containing mineral binders and both dense and lightweight aggregates.
Prüfverfahren für Mörtel für Mauerwerk - Teil 6: Bestimmung der Rohdichte von Frischmörtel
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Rohdichte von Frischmörteln einschließlich solcher aus mineralischen Bindemitteln und sowohl dichten Zuschlägen als auch Leichtzuschlägen fest.
Méthodes d'essai des mortiers pour maçonnerie - Partie 6: Détermination de la masse volumique apparente du mortier frais
La présente norme européenne spécifie une méthode pour déterminer la masse volumique apparente des mortiers frais, y compris les mortiers contenant des liants minéraux et à la fois des granulats lourds et légers.
Metode preskušanja zidarskih malt - 6. del: Ugotavljanje prostorninske mase sveže malte
General Information
- Status
- Published
- Publication Date
- 31-Dec-1998
- Withdrawal Date
- 31-Jan-2001
- Technical Committee
- CAA - Mineral binders and masonry
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jan-1999
- Due Date
- 01-Jan-1999
- Completion Date
- 01-Jan-1999
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Overview
SIST EN 1015-6:1999 is a European Standard that defines the standardized method for determining the bulk density of fresh mortar used in masonry. Developed by the Slovenian Institute for Standardization (SIST), this standard applies to mortars that include both mineral binders and aggregates, whether they are dense or lightweight. Accurate measurement of the bulk density of fresh mortar is critical in assessing material properties, ensuring quality control, and confirming compliance with construction specifications.
Key Topics
- Scope of Measurement: The standard provides clear procedures for evaluating the bulk density of various fresh mortar mixes, encompassing those with different mineral content and aggregate types.
- Sampling Requirements: Guidance is given for the representative sampling of fresh mortar to achieve reliable and repeatable test results.
- Test Procedure: SIST EN 1015-6:1999 outlines how to fill and compact fresh mortar within a container and the subsequent determination of mass and volume to calculate bulk density.
- Consistency and Comparability: The standard supports the reproducibility of results across different laboratories and test environments, thus facilitating quality assurance in masonry works.
Applications
Implementing SIST EN 1015-6:1999 is essential across several practical contexts in the building industry:
- Quality Control in Construction: Ensuring the correct bulk density of fresh mortar helps maintain structural integrity and durability in both residential and commercial masonry projects.
- Material Research and Development: Laboratories and manufacturers use this standard to test new mortar formulations, helping to refine and innovate construction materials.
- Compliance and Certification: Adhering to this standard is often required to meet regulatory compliance for masonry works, ensuring that mortar performs as expected under various service conditions.
- Comparative Testing: The standard provides a common basis for comparing different products, helping clients, contractors, and specifiers make informed choices about mortar selection.
Related Standards
Understanding and applying SIST EN 1015-6:1999 is best supported when used in conjunction with other relevant standards:
- EN 1015 Series: This document is part of the wider EN 1015 series, which addresses various test methods for masonry mortar, including those for consistency, compressive strength, and air content.
- EN 998-1 & EN 998-2: These standards specify requirements for mortar for masonry, including specifications for both rendering/plastering and masonry mortars.
- EN 196 Series: Covers test methods for cements, which are often key constituents in masonry mortars.
- National Regulations: Consider local building codes that may reference or require compliance with SIST EN 1015-6:1999 for specific construction practices.
By ensuring precise measurement of fresh mortar bulk density, SIST EN 1015-6:1999 plays a vital role in quality assurance and the consistent performance of masonry materials in construction projects.
Keywords: bulk density, fresh mortar, masonry, mortar testing standard, SIST EN 1015-6:1999, construction quality control, mortar aggregates, mineral binders, European standard, masonry mortar compliance
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 1015-6:1999 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar". This standard covers: This European Standard specifies a method for the determining the bulk density of fresh mortars including those containing mineral binders and both dense and lightweight aggregates.
This European Standard specifies a method for the determining the bulk density of fresh mortars including those containing mineral binders and both dense and lightweight aggregates.
SIST EN 1015-6:1999 is classified under the following ICS (International Classification for Standards) categories: 91.100.10 - Cement. Gypsum. Lime. Mortar. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1015-6:1999 has the following relationships with other standards: It is inter standard links to SIST EN 998-2:2017, SIST EN 1015-3:2001, SIST EN 1015-2:1999, SIST EN 16506:2015, SIST EN ISO 11296-9:2023, SIST EN 1504-2:2004, SIST EN 1015-6:1999/A1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1015-6:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 1015-6:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metode preskušanja zidarskih malt - 6. del: Ugotavljanje prostorninske mase sveže maltePrüfverfahren für Mörtel für Mauerwerk - Teil 6: Bestimmung der Rohdichte von FrischmörtelMéthodes d'essai des mortiers pour maçonnerie - Partie 6: Détermination de la masse volumique apparente du mortier fraisMethods of test for mortar for masonry - Part 6: Deter
...