Continuous mechanical handling equipment -- Classification and symbolization of bulk materials

Establishes a classification and symbolization of bulk materials in order to assist communication between manufacturers and users of handling equipment. The object of the classification is to secure from enquirers an accurate description of the material to be handled in respect of any specific project.

Engins de manutention continue -- Classification et symbolisation des matériaux en vrac

Naprave in sistemi za kontinuirni transport - Razvrstitev in označevanje sipkega transportiranega materiala

General Information

Status
Published
Publication Date
30-Apr-1996
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-1996
Due Date
01-May-1996
Completion Date
01-May-1996

Buy Standard

Standard
ISO 3435:1977 - Continuous mechanical handling equipment -- Classification and symbolization of bulk materials
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 3435:1996
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ISO 3435:1977 - Engins de manutention continue -- Classification et symbolisation des matériaux en vrac
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 3435:1977 - Engins de manutention continue -- Classification et symbolisation des matériaux en vrac
French language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

3435
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 44EXWCAYHAPOXHAR OPI-AHM3AUIM fl0 CTAH~APTM3AUWM l ORGANISATION INTERNATIONALE DE NORMALISATION
Continuous mechanical handling equipment - Classification
and symbolization of bulk materials
Engins de manuten tion con tinue - Classifica tion et s ymbolisa tion des ma tkiaux en vrac
First edition - 1977~02~01
Ref. No. ISO 3435-1977 (E)
UDC 621.867 : 003.62
Desctiptors : materials handling, continuous handling, bul k products, geometrical characteristics, classifying, Symbols.
Price based on 2 pages

---------------------- Page: 1 ----------------------
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 3435 was deveioped by Technical Committee
ISO/TC 101, Continuous mechanical handling equipment, and was circuiated
to the member bodies in November 1975.
lt has been approved by the member bodies of the following countries :
Belg ium Italy Sweden
Mexico Turkey
Bulgaria
Finland Romania United Kingdom
France South Africa, Rep. of U.S.S. R.
Spain
Germany Yugoslavia
bod ies of the fo Ilowing countries expressed di roval of the
The member
SaPP
document on I grounds :
technica
Austral ia
kia
Czechoslova
0 International Organkation fot Standardkation, 1977 l
Printed in Switzerland

---------------------- Page: 2 ----------------------
ISO 3435-1977 (E)
INTERNATIONAL STANDARD
Continuous mechanical handling equipment - Classification
and symbolkation of bulk materials
1 SCOPE AND FIELD OF APPLICATION b ) Non -classified ma terials
This International Standard establishes a classif ication and These are materials for which the Same ratio is greater
symbolization of bulk materials in Order to assist than 2,5 :
communication between manufacturers and users of
d
max
handling equipment.
-> 2,5
d
min
The Object of the classification is to secure from enquirers
for mechanical handling equipment an accurate description
Classified materials are adequately defined by the values
of the material to be handled in respect of any specific
d
max and dmin*
project; for this purpose the user will be asked to complete
Non-classified materials, however, require in most cases a
a questionnaire, common to all manufacturers, covering
complete grading analysis, made by sections in which the
the Points indicated below.
extreme ratios of the lump sizes should not exceed 2,5. The
NOTE - It may prove helpful to provide a Sample of the product.
grading inscription shall at least indicate the Proportion
(by mass) of the lumps between 0,8 dmax and dmax,
d
being the size of the biggest lump which tan be found
max
2 GRANULARIW
in the material.
The granularity of the material is described by two
characteristic properties, namely the lump size and the
I mportant note - Whatever the grading or its description
lump form.
might be, an indication shall be made as to whether it tan
be considered as a regular average. If the grading differs
2.1 Lump size (grading)
over a period of time, the limits of probable variations and
their duration shall be defined, especially if repeated
The majority of bulk materials contain lumps (or grains) of
periods are anticipated where concentrations of big lumps
various gradings, of which it is necessary to know, with a
will occur.
reasonable approximation, the Iimiting values and relative
proportions in the mass to be handled, so as to determine
In all cases
...

SLOVENSKI STANDARD
SIST ISO 3435:1996
01-maj-1996
1DSUDYHLQVLVWHPL]DNRQWLQXLUQLWUDQVSRUW5D]YUVWLWHYLQR]QDþHYDQMHVLSNHJD
WUDQVSRUWLUDQHJDPDWHULDOD
Continuous mechanical handling equipment -- Classification and symbolization of bulk
materials
Engins de manutention continue -- Classification et symbolisation des matériaux en vrac
Ta slovenski standard je istoveten z: ISO 3435:1977
ICS:
53.040.01 Oprema za neprekinjen Continuous handling
transport na splošno equipment in general
SIST ISO 3435:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 3435:1996

---------------------- Page: 2 ----------------------

SIST ISO 3435:1996
3435
INTERNATIONAL STANDARD
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION 44EXWCAYHAPOXHAR OPI-AHM3AUIM fl0 CTAH~APTM3AUWM l ORGANISATION INTERNATIONALE DE NORMALISATION
Continuous mechanical handling equipment - Classification
and symbolization of bulk materials
Engins de manuten tion con tinue - Classifica tion et s ymbolisa tion des ma tkiaux en vrac
First edition - 1977~02~01
Ref. No. ISO 3435-1977 (E)
UDC 621.867 : 003.62
Desctiptors : materials handling, continuous handling, bul k products, geometrical characteristics, classifying, Symbols.
Price based on 2 pages

---------------------- Page: 3 ----------------------

SIST ISO 3435:1996
ISO (the International Organization for Standardization) is a worldwide federation
of national Standards institutes (ISO member bodies). The work of developing
International Standards is carried out through ISO technical committees. Every
member body interested in a subject for which a technical committee has been set
up has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated
to the member bodies for approval before their acceptance as International
Standards by the ISO Council.
International Standard ISO 3435 was deveioped by Technical Committee
ISO/TC 101, Continuous mechanical handling equipment, and was circuiated
to the member bodies in November 1975.
lt has been approved by the member bodies of the following countries :
Belg ium Italy Sweden
Mexico Turkey
Bulgaria
Finland Romania United Kingdom
France South Africa, Rep. of U.S.S. R.
Spain
Germany Yugoslavia
bod ies of the fo Ilowing countries expressed di roval of the
The member
SaPP
document on I grounds :
technica
Austral ia
kia
Czechoslova
0 International Organkation fot Standardkation, 1977 l
Printed in Switzerland

---------------------- Page: 4 ----------------------

SIST ISO 3435:1996
ISO 3435-1977 (E)
INTERNATIONAL STANDARD
Continuous mechanical handling equipment - Classification
and symbolkation of bulk materials
1 SCOPE AND FIELD OF APPLICATION b ) Non -classified ma terials
This International Standard establishes a classif ication and These are materials for which the Same ratio is greater
symbolization of bulk materials in Order to assist than 2,5 :
communication between manufacturers and users of
d
max
handling equipment.
-> 2,5
d
min
The Object of the classification is to secure from enquirers
for mechanical handling equipment an accurate description
Classified materials are adequately defined by the values
of the material to be handled in respect of any specific
d
max and dmin*
project; for this purpose the user will be asked to complete
Non-classified materials, however, require in most cases a
a questionnaire, common to all manufacturers, covering
complete grading analysis, made by sections in which the
the Points indicated below.
extreme ratios of the lump sizes should not exceed 2,5. The
NOTE - It may prove helpful to provide a Sample of the product.
grading inscription shall at least indicate the Proportion
(by mass) of the lumps between 0,8 dmax and dmax,
d
being the size of the biggest lump which tan be found
max
2 GRANULARIW
in the material.
The granularity of the material is described by two
characteristic properties, namely the lump size and the
I mportant note - Whatever the grading or its description
lump form.
might be, an indication shall be made as to whether it tan
be considered as a regular average. If the grading differs
2.1 Lump size (grading)
over a period of time, the limits of probab
...

NORME INTERNATIONALE
3435
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXaYHAPOJIHAJI OPI-AHM3ALWI l-l0 CrAHAAPTW3ALWïM .ORGANISATION INTERNATIONALE DE NORMALISATION
Engins de manutention continue - Classification et
symbolisation des matériaux en vrac
Con tinuous mechanical handling equipmen t - Classifiea tion and s ymboliza tion of bulk ma terials
Première édition - 1977-02-01
CDU 621.867 : 003.62
Réf. no : ISO 3435-1977 (F)
Descripteurs : manutention de matériau, manutention continue, produit en vrac,
caractéristique géométrique, classement, symbole.
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L’ISO (Organisation internationale de normalisation) est une fédération mondiale
d’organismes nationaux de normalisation (comités membres de I’ISO). L’élaboration
des Normes internationales est confiée aux comités techniques de I’ISO. Chaque
comité membre intéressé par une étude a le droit de faire partiedu comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernemèntales, en liaison avec I’ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I’ISO.
La Norme internationale ISO 3435 a été élaborée par le comité technique
ISO/TC 101, Engins de manutention continue, et a été soumise aux comités
membres en novembre 1975.
Les comités membres des pays suivants l’ont approuvée :
Royaume-Uni
Afrique du Sud, Rép. d’ Fin.lande
Allemagne France Suède
Turquie
Belgique Italie
Bulgarie Mexique U.R.S.S.
Espagne Roumanie Yougoslavie
Les comités membres des pays suivants l’ont désapprouvée pour des raisons
techniques :
Australie
Tchécoslovaquie
0 Organisation internationale de normalisation, 1977 l
Imprimé en Suisse

---------------------- Page: 2 ----------------------
ISO 34354977 (F)
NORME INTERNATIONALE
Engins de manutention continue - Classification et
symbolisation des matériaux en vrac
b) Matériaux non classés
1 OBJET ET DOMAINE D’APPLICATION
Les matériaux non classés sont ceux pour lesquels le :
La présente Norme internationale établit une classification
même rapport est supérieur à 2,5 :
et une symbolisation des matériaux en vrac, afin de faciliter
les rapports entre les constructeurs et les utilisateurs des
d
engins de manutention.
fi > 2,5
d
min
Le but poursuivi est d’inviter l’utilisateur à définir lui-même,
avec un minimum de risques, d’erreurs ou d’omissions, la
Les premiers sont suffisamment définis par les valeurs
matière à transporter; à cet effet, l’utilisateur aura à remplir
d
max etdrnina
un questionnaire commun à tous les constructeurs et relatif
aux critères passés en revue ci-après. Les seconds doivent l’être le plus souvent par une analyse
granulométrique complète faite par tranches où les rapports
NOTE
- II peut s’avérer souhaitable de fournir un échantillon du
extrêmes des grosseurs de morceaux ne dépasseront pas 2,5
produit.
et qui comportera au moins la proportion (en masse) des
morceaux compris entre 0,8 dmax et dmax, dmax étant
ici le plus gros morceau pouvant se rencontrer dans le
2 GRANULARITÉ
matériau.
La granularité du matériau est caractérisée par deux aspects,
c’est-à-dire par la granulométrie et par la forme des
Remarque importante - Quelle que soit la granulométrie
morceaux.
ou sa description, il faut indiquer si on peut la considérer
comme une moyenne régulière. Si la granulométrie a des
2.1 Granulométrie
changements temporaires, on doit définir les limites de ces
variations probables et leur durée, surtout si l’on prévoit
La majorité des matériaux en vrac contiennent des
morceaux (ou grains) de granulométries diverses, dont il est des périodes répétées où se rencontrent des concentrations
nécessaire de connaître avec une approximation raisonnable de gros morceaux.
les valeurs extrêmes et les proportions relatives dans la
Indiquer dans tous les cas, et plus particulièrement en ce
masse à manutentionner, afin de déterminer avec sécurité
les grands morceaux, les dimensions
qui concerne
diverses caractéristiques des appareils utilisés à ces fins.
maximales du plus gros grain ou morceau.
La grosseur d’un morceau e
...

NORME INTERNATIONALE 3435
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEXnYHAPOOHAX OPrAHLl3AUMI no CTAHnAPTM3AUMM .ORGANISATION INTERNATIONALE DE NORMALISATION
Engins de manutention continue - Classification et
symbolisation des matériaux en vrac
Continuous mechanical handling equipment - Classification and symbolization of bulk materials
Première édition - 1977-02-01
U.
1
CDU 621.867 : 003.62 Réf. no : IS0 3435-1977 (F)
r-
r-
z
m Descripteurs : manutention de matériau. manutention continue, produit en vrac, Caractéristique géométrique, classement, symbole.
m
E
Prix basé sur 2 pages

---------------------- Page: 1 ----------------------
AVANT-PROPOS
L'ISO (Organisation internationale de normalisation) est une fédération mondiale
d'organismes nationaux de normalisation (comités membres de I'ISO). L'élaboration
des Normes internationales est confiée aux comités techniques de I'ISO. Chaque
comité membre intéressé par une étude a le droit de faire partie du comité technique
correspondant. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec I'ISO, participent également aux travaux.
Les projets de Normes internationales adoptés par les comités techniques sont
soumis aux comités membres pour approbation, avant leur acceptation comme
Normes internationales par le Conseil de I'ISO.
La Norme internationale IS0 3435 a été élaborée par le comité technique
ISO/TC 101, Engins de manutention continue, et a été soumise aux comités
membres en novembre 1975.
Les comités membres des pays suivants l'ont approuvée
Afrique du Sud, Rép. d' Finlande Royaume-Uni
Allemagne France Suède
Belgique Italie Turquie
Bulgarie Mexique U. R .S.S.
Espagne Roumanie Yougoslavie
Les comités membres des pays suivants l'ont désapprouvée pour des raisons
techniques :
Australie
Tchécoslovaquie
O Organisation internationale de normalisation, 1977 0
Imprimé en Suisse

---------------------- Page: 2 ----------------------
NORME INTERNATIONALE IS0 3435-1977 (F)
Engins de manutention continue - Classification et
symbolisation des matériaux en vrac
1 OBJET ET DOMAINE D'APPLICATION b) Matériaux non classés
Les matériaux non classés sont ceux pour lesquels le
La présente Norme internationale établit une classification
et une symbolisation des matériaux en vrac, afin de faciliter même rapport est supérieur à 2,5 :
les rapports entre les constructeurs et les utilisateurs des
dmax
engins de manutention.
- > 2,5
dm in
Le but poursuivi est d'inviter l'utilisateur 5 définir lui-même,
avec un minimum de risques, d'erreurs ou d'omissions, la
Les premiers sont suffisamment définis par les valeurs
à transporter; à cet effet, l'utilisateur aura à remplir
matière
dm ax et dm in.
un questionnaire commun à tous les constructeurs et relatif
aux critères passés en revue ci-après. Les seconds doivent I'être le plus souvent par une analyse
granulométrique complete faite par tranches OÙ les rapports
NOTE - II peut s'avérer souhaitable de fournir un Bchantillon du
extrêmes des grosseurs de morceaux ne dépasseront pas 2.5
produit.
et qui comportera au moins la proportion (en masse) des
morceaux compris entre 0.8 d,,, et d,,,, d,,, étant
ici le plus gros morceau pouvant se rencontrer dans le
z GRANULARITÉ
matériau.
La granularité du matériau est Caractérisée par deux aspects,
et par la forme des
c'est-à-dire par la granulométrie
Remarque importante - Quelle que soit la granulométrie
morceaux.
ou sa description, il faut indiquer si on peut la considérer
comme une moyenne régulière. Si la granulométrie a des
2.1 Granulométrie
les limites de ces
changements temporaires, on doit définir
La majorité des matériaux en vrac contiennent des variations probables et leur durée, surtout si l'on prévoit
morceaux (ou grains) de granulométries diverses, dont il est des périodes répétées OÙ se rencontrent des concentrations
nécessaire de connaître avec une approximation raisonnable de gros morceaux.
les valeurs extrêmes et les proportions relatives dans la
les cas, et plus particulièrement en ce
Indiquer dans tous
masse à manutentionner, afin de déterminer avec sécurité
qui concerne les grands morceaux, les dimensions
diverses caractéristiques des appareils utilisés a ces fins.
maximales du plus gros grain ou morceau.
La grosseur d'un morc
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.