SIST EN 13286-45:2004

Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures

This European Standard described test methods to determine the workability period of a hydraulically bound mixture using granular materials.
Two methods are described: delayed compaction and sonic propagation. The latter method is not suitable for hydraulically bound mixture with D less than or equal to 6,3 mm.

Ungebundene und hydraulisch gebundene Gemische - Teil 45: Prüfverfahren zur Bestimmung der Verarbeitbarkeitsdauer hydraulisch gebundener Gemische

In dieser Norm werden Prüfverfahren zur Bestimmung der Verarbeitbarkeitsdauer eines grobkörnigen hydraulisch gebundenen Gemisches beschrieben.
Es werden zwei Verfahren beschrieben: Verdichtungsverfahren und Schallverfahren. Das letztgenannte Verfahren ist für hydraulisch gebundene Gemische mit D   6,3 mm nicht geeignet.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 45: Méthodes d'essai pour la détermination du délai de maniabilité

Le présent document décrit une méthode d'essai permettant de déterminer le délai de maniabilité d'un mélange traité aux liants hydrauliques.
Deux méthodes sont décrites : par compactage différé et par propagation du son. La derniere méthode n'est pas utilisable pour les mélanges traités aux liants hydrauliques de D inférieur ou égal a 6,3 mm.

Nevezane in hidravlično vezane zmesi – 45. del: Preskusna metoda za ugotavljanje časa obdelovalnosti hidravlično vezanih zmesi

General Information

• Status: Published
• Publication Date: 31-May-2004
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2004
• Due Date: 01-Jun-2004
• Completion Date: 01-Jun-2004
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 13286-45:2003 - Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 45: Prüfverfahren zur Bestimmung der Verarbeitbarkeitsdauer hydraulisch gebundener GemischeMélanges traités et mélanges non traités aux liants hydrauliques - Partie 45: Méthodes d'essai pour la détermination du délai de maniabilitéUnbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-45:2003SIST EN 13286-45:2004en01-junij-2004SIST EN 13286-45:2004SLOVENSKI
STANDARD



SIST EN 13286-45:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-45November 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 45: Testmethod for the determination of the workability period ofhydraulically bound mixturesMélanges traités et mélanges non traités aux liantshydrauliques - Partie 45: Méthodes d'essai pour ladétermination du délai de maniabilitéUngebundene und hydraulisch gebundene Gemische - Teil45: Prüfverfahren zur Bestimmung derVerarbeitbarkeitsdauer hydraulisch gebundener GemischeThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-45:2003 ESIST EN 13286-45:2004



EN 13286-45:2003 (E)2ContentspageForeword.31Scope.52Normative references.53Term and definition.54Symbols and abbreviations.55Delayed compaction method.65.1Principle.65.2Apparatus.65.3Preparation of the mixtures.65.4Procedure.65.5Calculations and expression of results.66Sonic propagation method.76.1Principle.76.2Apparatus.76.3Preparation of the mixtures.86.4Procedure.96.5Calculations and expression of results (see Figure 3).97Test report.10Annex A (normative)
Determination of the K coefficient of the dynamic testing bench — Correlationbetween initial propagation duration and propagation duration at time t.11SIST EN 13286-45:2004



EN 13286-45:2003 (E)3ForewordThis document (EN 13286-45:2003) has been prepared by Technical Committee CEN/TC 227 “Road materials”,the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest byDecember 2004.This European standard is one of a series of standards as listed below.EN 13286-1, Unbound and hydraulically bound mixtures — Part 1: Test methods for laboratory reference densityand water content — Introduction,general requirements and sampling.prEN 13286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for laboratory reference densityand moisture content — Proctor compaction.EN 13286-3, Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory reference densityand water content — Vibrocompression with controlled parameters.EN 13286-4, Unbound and hydraulically bound mixtures — Part 4: Test methods for laboratory reference densityand water content — Vibrating hammer.EN 13286-5, Unbound and hydraulically bound mixtures — Part 5: Test methods for laboratory reference densityand water content — Vibrating table.prEN 13286-7, Unbound and hydraulically bound mixtures — Part 7: Cyclic load triaxial test for unbound mixtures.EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the determination of thedirect tensile strength of hydraulically bound mixtures.EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test method for the determination of thecompressive strength of hydraulically bound mixtures.EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the determination of theindirect tensile strength of hydraulically bound mixtures.EN 13286-43, Unbound and hydraulically bound mixtures — Part 43: Test methods for the determination of themodulus of elasticity of hydraulically bound mixtures.EN 13286-44, Unbound and hydraulically bound mixtures — Part 44: Test method for the determination of thealpha coefficient of vitrified blast furnace slag.EN 13286-45, Unbound and hydraulically bound mixtures — Part 45: Test method for the determination of theworkability period of hydraulically bound mixtures.EN 13286-46, Unbound and hydraulically bound mixtures — Part 46: Test method for the determination of themoisture condition value.prEN 13286-47, Unbound and hydraulically bound mixtures — Part 47: Test methods for the bearing capacity,California Bearing Ratio (CBR), immediate Bearing Index (IB) and linear swelling.prEN 13286-48, Unbound and hydraulically bound mixtures — Part 48: Test method for the determination of thedegree of pulverization.SIST EN 13286-45:2004



EN 13286-45:2003 (E)4prEN 13286-49, Unbound and hydraulically bound mixtures — Methods for making test specimens – Part 49:Accelerated swelling test for soil treated by lime and/or hydraulic binder.prEN 13286-50, Unbound and hydraulically bound mixtures — Part 50: Methods for making test specimensusingProctor equipment or vibrating table compaction.prEN 13286-51, Unbound and hydraulically bound mixtures — Part 51: Methods for making test specimens byvibrating hammer compaction.prEN 13286-52, Unbound and hydraulically bound mixtures — Methods for making test specimens – Part 52:Making specimens by vibrocompression.prEN 13286-53, Unbound and hydraulically bound mixtures — Methods for making test specimens - Part 53:Making cylindrical specimens by axial compression.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13286-45:2004



EN 13286-45:2003 (E)51 ScopeThis European Standard describes test methods to determine the workability period of a hydraulically boundmixture using granular materials.Two methods are described: delayed
...