EN 13286-45:2003

Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures

This European Standard described test methods to determine the workability period of a hydraulically bound mixture using granular materials.
Two methods are described: delayed compaction and sonic propagation. The latter method is not suitable for hydraulically bound mixture with D less than or equal to 6,3 mm.

Ungebundene und hydraulisch gebundene Gemische - Teil 45: Prüfverfahren zur Bestimmung der Verarbeitbarkeitsdauer hydraulisch gebundener Gemische

In dieser Norm werden Prüfverfahren zur Bestimmung der Verarbeitbarkeitsdauer eines grobkörnigen hydraulisch gebundenen Gemisches beschrieben.
Es werden zwei Verfahren beschrieben: Verdichtungsverfahren und Schallverfahren. Das letztgenannte Verfahren ist für hydraulisch gebundene Gemische mit D   6,3 mm nicht geeignet.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 45: Méthodes d'essai pour la détermination du délai de maniabilité

Le présent document décrit une méthode d'essai permettant de déterminer le délai de maniabilité d'un mélange traité aux liants hydrauliques.
Deux méthodes sont décrites : par compactage différé et par propagation du son. La dernière méthode n'est pas utilisable pour les mélanges traités aux liants hydrauliques de D inférieur ou égal à 6,3 mm.

Nevezane in hidravlično vezane zmesi – 45. del: Preskusna metoda za ugotavljanje časa obdelovalnosti hidravlično vezanih zmesi

General Information

• Status: Published
• Publication Date: 25-Nov-2003
• Withdrawal Date: 30-Dec-2004
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 4 - Hydraulic bound and unbound mixtures (including byproducts and waste materials)
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 14-Feb-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13286-45:2004 - Unbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 45: Prüfverfahren zur Bestimmung der Verarbeitbarkeitsdauer hydraulisch gebundener GemischeMélanges traités et mélanges non traités aux liants hydrauliques - Partie 45: Méthodes d'essai pour la détermination du délai de maniabilitéUnbound and hydraulically bound mixtures - Part 45: Test method for the determination of the workability period of hydraulically bound mixtures93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-45:2003SIST EN 13286-45:2004en01-junij-2004SIST EN 13286-45:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-45November 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 45: Testmethod for the determination of the workability period ofhydraulically bound mixturesMélanges traités et mélanges non traités aux liantshydrauliques - Partie 45: Méthodes d'essai pour ladétermination du délai de maniabilitéUngebundene und hydraulisch gebundene Gemische - Teil45: Prüfverfahren zur Bestimmung derVerarbeitbarkeitsdauer hydraulisch gebundener GemischeThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-45:2003 ESIST EN 13286-45:2004

Determination of the K coefficient of the dynamic testing bench — Correlationbetween initial propagation duration and propagation duration at time t.11SIST EN 13286-45:2004
...