oSIST prEN 12094-11:2016
(Main)Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
Fixed firefighting systems - Components for gas extinguishing systems - Part 11: Requirements and test methods for mechanical weighing devices
This European Standard specifies requirements and test methods for mechanical weighing devices for continuous monitoring of containers of CO2-, Inert Gas- or Halocarbon Gas-Fire Extinguishing Installations.
This European Standard does not cover weighing devices for non-transportable containers which are filled and refilled on site, e.g. CO2-low-pressure containers.
Ortsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen Löschmitteln - Teil 11: Anforderungen und Prüfverfahren für mechanische Wägeeinrichtungen
Diese Norm legt Anforderungen und Prüfverfahren für mechanische Abwiege-Vorrichtungen zur dauerhaften Überwachung von Behältern mit CO2- Inertgas- oder Feuerlöschanlagen mit halogenierten Kohlenwasserstoffen.
Dieser Europäische Norm befasst sich nicht mit Abwiege-Vorrichtungen für nicht transportierbare Behälter, die vor Ort(wieder-)befüllt werden, wie z. B. CO2-Niederdruckbehälter.
Installations fixes de lutte contre l’incendie - Éléments constitutifs des installations d’extinction à gaz - Partie 11 : Exigences et méthodes d’essai pour dispositifs de pesée mécaniques
La présente Norme européenne spécifie les exigences et les méthodes d’essai applicables aux dispositifs de pesée mécaniques pour la surveillance continue de réservoirs d’installations d’extinction incendie à CO2, à gaz inerte ou à gaz halogéné.
La présente Norme européenne ne s’applique pas aux dispositifs de pesée pour réservoirs non transportables qui sont remplis et re-remplis sur site, par exemple les réservoirs à CO2 basse pression.
Vgrajeni gasilni sistemi - Sestavni deli sistemov za gašenje s plinom - 11. del: Zahteve in preskusne metode za mehanske naprave za tehtanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 12094-11:2016
01-september-2016
Vgrajeni gasilni sistemi - Sestavni deli sistemov za gašenje s plinom - 11. del:
Zahteve in preskusne metode za mehanske naprave za tehtanje
Fixed firefighting systems - Components for gas extinguishing systems - Part 11:
Requirements and test methods for mechanical weighing devices
Ortsfeste Brandbekämpfungsanlagen - Bauteile für Löschanlagen mit gasförmigen
Löschmitteln - Teil 11: Anforderungen und Prüfverfahren für mechanische
Wägeeinrichtungen
Installations fixes de lutte contre l’incendie - Éléments constitutifs des installations
d’extinction à gaz - Partie 11 : Exigences et méthodes d’essai pour dispositifs de pesée
mécaniques
Ta slovenski standard je istoveten z: prEN 12094-11
ICS:
13.220.10 Gašenje požara Fire-fighting
oSIST prEN 12094-11:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 12094-11:2016
---------------------- Page: 2 ----------------------
oSIST prEN 12094-11:2016
DRAFT
EUROPEAN STANDARD
prEN 12094-11
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2016
ICS 13.220.20 Will supersede EN 12094-11:2003
English Version
Fixed firefighting systems - Components for gas
extinguishing systems - Part 11: Requirements and test
methods for mechanical weighing devices
Installations fixes de lutte contre l'incendie - Éléments Ortsfeste Brandbekämpfungsanlagen - Bauteile für
constitutifs des installations d'extinction à gaz - Partie Löschanlagen mit gasförmigen Löschmitteln - Teil 11:
11 : Exigences et méthodes d'essai pour dispositifs de Anforderungen und Prüfverfahren für mechanische
pesée mécaniques Wägeeinrichtungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 191.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12094-11:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 12094-11:2016
prEN 12094-11:2016 (E)
Contents page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Terms and definitions . 5
3 Product characteristics . 6
3.1 General . 6
3.2 Operational reliability . 6
3.3 Durability of operational reliability .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.