iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 11202:1995/AC:2004

(Amendment)

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)

Akustik - Geräuschabstrahlung von Maschinen und Geräten - Messung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten - Verfahren der Genauigkeitsklasse 3 für Messungen unter Einsatzbedingungen (ISO 11202:1995)

Acoustique - Bruit émis par les machines et équipements - Mesurage des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées - Méthode de contrôle in situ (ISO 11202:1995)

Akustika - Emisija hrupa strojev in naprav - Merjenje emisijske ravni zvočnega tlaka na mestu delovanja in na drugih opredeljenih mestih - Pregledna metoda na mestu vgradnje (ISO 11202:1995)

General Information

Status
Withdrawn
Publication Date
31-Dec-2003
Withdrawal Date
27-Aug-2009
ICS
17.140.20 - Noise emitted by machines and equipment
Technical Committee
AKU - Acoustics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Aug-2009
Due Date
20-Sep-2009
Completion Date
28-Aug-2009
Directive
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
EN ISO 11202:1995/AC:1997 - Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)

Relations

Replaced By
SIST EN ISO 11202:2009 - Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)
Effective Date
01-Nov-2009
Corrects
SIST EN ISO 11202:1997 - Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)
Effective Date
22-Dec-2008
Corrects
SIST EN ISO 11202:1997 - Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO 11202:1995)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 11202:1995/AC:2004EN ISO 11202:1995/AC:2004
PreviousNext
Corrigendum
EN ISO 11202:1995/AC:2004
French language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Akustik - Geräuschabstrahlung von Maschinen und Geräten - Messung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten - Verfahren der Genauigkeitsklasse 3 für Messungen unter Einsatzbedingungen (ISO 11202:1995)Acoustique - Bruit émis par les machines et équipements - Mesurage des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées - Méthode de contrôle in situ
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 20270:2023(Main)
Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces (ISO 20270:2019)
EN ISO 20270:2022

This document specifies a method where a vibrating component (a source of structure-borne sound or vibration) is attached to a passive structure (or receiver) and is the cause of vibration in, or structure-borne sound radiation from, the assembly. Examples are pumps installed in ships, servo motors in vehicles or machines and plant in buildings. Almost any vibrating component can be considered as a source in this context.
Due to the need to measure vibration at all contact degrees of freedom (DOFs) (connections between the source and receiver), this document can only be applied to assemblies for which such measurement is possible.
This document is applicable only to assemblies whose frequency response functions (FRFs) are linear and time invariant.
The source can be installed into a real assembly or attached to a specially designed test stand (as described in 5.2).
The standard method has been validated for stationary signals such that the results can be presented in the frequency domain. However, the method is not restricted to stationary signals: with appropriate data processing, it is also applicable to time-varying signals such as transients and shocks (provided linearity and time invariance of the FRFs are preserved).
This document provides a method for measurement and presentation of blocked forces, together with guidelines for minimizing uncertainty. It provides a method evaluating the quality of the results through an on-board validation procedure but does not comment on the acceptability or otherwise of the results.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17201-6:2022(Main)
Acoustics - Noise from shooting ranges - Part 6: Sound pressure measurements close to the source for determining exposure to sound (ISO 17201-6:2021)
EN ISO 17201-6:2022

This document specifies methods for recording the time history of the sound pressure produced either by shooting with calibres of less than 20 mm, or by detonation of explosive charges of less than 50 g TNT equivalent, within the shooting range at locations of interest, regarding the exposure to sound of the shooter, or any other person within the shooting range. The time history of the sound pressure can be the basis for further analyses of this type of sound at the locations of interest.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 7849-2:2022(Main)
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009)
CEN ISO/TS 7849-2:2022

This part of ISO/TS 7849 gives basic requirements for a reproducible method for the determination of the
sound power level of the noise emitted by machinery or equipment by using surface vibration measurements,
together with the knowledge of the machinery specific sound radiation factor in the frequency bands. The
method is only applicable to noise which is emitted by vibrating surfaces of solid structures and not to noise
generated aerodynamically.
This vibration measurement method is especially applicable in cases where accurate direct airborne noise
measurements, e.g. as specified in ISO 3746[7], ISO 3747[8], and ISO 9614 (all parts)[14], are not possible
because of high background noise or other parasitic environmental interferences; or, if a distinction is required
between the total radiated sound power and its structure vibration generated component.
NOTE 1 One of the applications of this part of ISO/TS 7849 is the distinction between the radiation of airborne sound
power generated by structure vibration and the aerodynamic sound power components. Such a distinction is not feasible
with ISO 3744[5], ISO 3745[6], ISO 3746[7] and ISO 9614 (all parts)[14].
NOTE 2 Problems may occur if the noise is generated by small parts of machinery surfaces (sliding contacts, e.g. slip
ring brush or the commutator and the brush in electrical machines).
The methods described in this part of ISO/TS 7849 apply mainly to processes that are stationary with respect
to time.
Recommendations on the selection of frequency bands are given in Annex C

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN ISO/TS 7849-1:2022(Main)
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009)
CEN ISO/TS 7849-1:2022

This part of ISO/TS 7849 gives basic requirements for reproducible methods for the determination of an upper limit for the A-weighted sound power level of the noise emitted by machinery or equipment by using surface vibration measurements. The method is only applicable to noise which is emitted by vibrating surfaces of solid structures and not to noise generated aerodynamically.
This vibration measurement method is especially applicable in cases where accurate direct airborne noise measurements, e.g. as specified in ISO 3746[7], ISO 3747[8], and ISO 9614 (all parts)[12], are not possible because of high background noise or other parasitic environmental interferences; or if a distinction is required between the total radiated sound power and its structure vibration generated component.
NOTE 1   One of the applications of this part of ISO/TS 7849 is the distinction between the radiation of airborne sound power generated by structure vibration and the aerodynamic sound power components. Such a distinction is not feasible with ISO 3746[7] and ISO 9614 (all parts)[12].
NOTE 2   Problems can occur if the noise is generated by small parts of machinery surfaces (sliding contacts, e.g. slip ring brush or the commutator and the brush in electrical machines).
The methods described in this part of ISO/TS 7849 apply mainly to processes that are stationary with respect to time.

  • Technical specification
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10052:2021(Main)
Acoustics - Field measurements of airborne and impact sound insulation and of service equipment sound - Survey method (ISO 10052:2021)
EN ISO 10052:2021

This document specifies field survey methods for measuring
a) airborne sound insulation between rooms,
b) impact sound insulation of floors,
c) airborne sound insulation of façades, and
d) sound pressure levels in rooms caused by service equipment.
The methods described in this document are applicable for measurements in rooms of dwellings or in
rooms of comparable size with a maximum of 150 m3.
For airborne sound insulation, impact sound insulation and façade sound insulation the method gives
values which are (octave band) frequency dependent. They can be converted into a single number
characterising the acoustical performances by application of ISO 717-1 and ISO 717-2. For heavy/soft
impact sound insulation, the results also are given as A-weighted maximum impact sound pressure
level. For service equipment sound the results are given directly in A - or C -weighted sound pressure
levels.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11202:2010/A1:2021(Amendment)
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)
EN ISO 11202:2010/A1:2021

2021-04-15 HD: Through Decision BT C067/2021, BT approved revised Annex ZA after Formal Vote

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11690-1:2021(Main)
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:2020)
EN ISO 11690-1:2020

This document outlines strategies to be used in dealing with noise problems in existing and planned
workplaces by describing basic concepts in noise control (noise reduction, noise emission, noise
immission and noise exposure). It is applicable to all types of workplaces and all types of sources of
sound which are met in workplaces, including human activities.
It includes those important strategies to adopt when buying a new machine or equipment.
This document deals only with audible sound.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11690-2:2021(Main)
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:2020)
EN ISO 11690-2:2020

This document deals with the technical aspects of noise control in workplaces. The various technical
measures are stated, the related acoustical quantities described, the magnitude of noise reduction
discussed, and the verification methods outlined.
This document deals only with audible sound.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5135:2020(Main)
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020)
EN ISO 5135:2020

EN-ISO 5135 establishes general rules for the acoustic testing of air-terminal devices, air-terminal units, dampers and valves used in air diffusion and air distribution systems in order to determine sound power levels as defined in ISO 3741.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 11203:2009/A1:2020(Amendment)
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)
EN ISO 11203:2009/A1:2020
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day