SIST HD 631.4 S1:2009
Electrical cables - Accessories - Material characterisation -- Part 4: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
Electrical cables - Accessories - Material characterisation -- Part 4: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
This Harmonization Document specifies the test methods and requirements for fingerprinting (as defined in 3.11) of cold shrinkable components intended to be used in cable accessories for low and medium voltage, as defined in EN 50393, HD 629.1 and HD 629.2.Fingerprinting of materials does not have a mandatory link to type testing of accessories. It shall be regarded as a stand-alone test, but may be carried out in combination with the accessory type tests.Component basic functions can be: conductive, stress control or stress grading, insulating, oil barrier, anti tracking, external protection and sealing. Components are supplied as single layer items or as multi-layer items.Components are generally supplied pre-expanded or with a system allowing expansion prior toinstallation.NOTE Information on health and safety is given in Annex A.
Kabel und isolierte Leitungen - Garnituren - Materialcharakterisierung -- Teil 4: Fingerprint-Prüfungen für kaltschrumpfende Komponenten für Nieder- und Mittelspannungsanwendungen bis 20,8/36 (42) kV
Dieses Harmonisierungsdokument legt die Bedingungen und Anforderungen für die Fingerprintprüfung (entsprechend 3.11) von kaltschrumpfenden Komponenten für die Verwendung in Kabelgarnituren für Niederspannung und für Mittelspannung nach EN 50393, HD 629.1 und HD 629.2 fest. Fingerprintprüfungen an Werkstoffen sind nicht zwingend mit der Typprüfung von Garnituren verbunden. Sie müssen als eigenständige Prüfung betrachtet werden, können aber auch in Kombination mit der Typprüfung von Garnituren durchgeführt werden. Die einzelnen Komponenten können im Wesentlichen leitfähige, feldsteuernde bzw. feldbegrenzende, isolierende, ölsperrende oder kriechstromfeste Eigenschaften haben. Die kaltschrumpfenden Komponenten sind entweder einlagig oder mehrlagig. Komponenten werden im Allgemeinen aufgeweitet oder mit einem System, das die Aufweitung vor der Installation erlaubt, geliefert. ANMERKUNG Informationen zu Gesundheit und Sicherheit enthält Anhang A.
Câbles électriques - Accessoires - Caractérisation des matériaux -- Partie 4: Essais d'identification des composants rétractables à froid pour les applications basse et moyenne tension jusqu’à 20,8/36 (42) kV
Le présent Document d’Harmonisation défini les méthodes et les exigences d’essai d’identification (tel que défini en 3.11), des composants rétractables à froid destinés à être utilisés dans les accessoires basse et moyenne tension, tels que définis dans la EN 50393, le HD 629.1 et le HD 629.2. Les essais d’identification des matériaux n'ont aucun lien obligatoire avec les essais de type des accessoires. Ils doivent être considérés comme des essais indépendants mais ils peuvent être réalisés conjointement avec les essais de type des accessoires. Les fonctions principales des composants peuvent être: conducteur, contrôleur de champ ou répartiteur de tension, isolant, barrière vis-à-vis de l'huile, anti-cheminement, protection externe et étanchéité. Les composants sont fournis en article mono couche ou en articles multi-couches. Les composants sont généralement livrés pré-expansés ou avec un système permettant l'expansion avant installation. NOTE Des informations sur la santé et la sécurité sont données en Annexe A.
Električni kabli - Pribor - Značilnosti materialov - 4. del: Identifikacija materiala hladno skrčljivih komponent za uporabo v nizko- in srednjenapetostnih sistemih do vključno 20,8/36(42) kV
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST HD 631.4 S1:2009
01-marec-2009
(OHNWULþQLNDEOL3ULERU=QDþLOQRVWLPDWHULDORYGHO ,GHQWLILNDFLMDPDWHULDOD
KODGQRVNUþOMLYLKNRPSRQHQW]DXSRUDERYQL]NRLQVUHGQMHQDSHWRVWQLKVLVWHPLK
GRYNOMXþQR N9
Electrical cables - Accessories - Material characterisation -- Part 4: Fingerprinting for cold
shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
Kabel und isolierte Leitungen - Garnituren - Materialcharakterisierung -- Teil 4:
Fingerprint-Prüfungen für kaltschrumpfende Komponenten für Nieder- und
Mittelspannungsanwendungen bis 20,8/36 (42) kV
Câbles électriques - Accessoires - Caractérisation des matériaux -- Partie 4: Essais
d'identification des composants rétractables à froid pour les applications basse et
moyenne tension jusqu’à 20,8/36 (42) kV
Ta slovenski standard je istoveten z: HD 631.4 S1:2008
ICS:
29.060.20 Kabli Cables
SIST HD 631.4 S1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST HD 631.4 S1:2009
---------------------- Page: 2 ----------------------
SIST HD 631.4 S1:2009
HARMONIZATION DOCUMENT
HD 631.4 S1
DOCUMENT D'HARMONISATION
July 2008
HARMONISIERUNGSDOKUMENT
ICS 29.035.20; 29.060.20
English version
Electrical cables -
Accessories -
Material characterisation -
Part 4: Fingerprinting for cold shrinkable components
for low and medium voltage applications up to 20,8/36 (42) kV
Câbles électriques - Kabel und isolierte Leitungen -
Accessoires - Garnituren -
Caractérisation des matériaux - Materialcharakterisierung -
Partie 4: Essais d'identification Teil 4: Fingerprint-Prüfungen
des composants rétractables à froid für kaltschrumpfende Komponenten
pour les applications basse für Nieder-
et moyenne tension und Mittelspannungsanwendungen
jusqu’à 20,8/36 (42) kV bis 20,8/36 (42) kV
This Harmonization Document was approved by CENELEC on 2008-06-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of this
Harmonization Document at national level.
Up-to-date lists and bibliographical references concerning such national implementations may be obtained on
application to the Central Secretariat or to any CENELEC member.
This Harmonization Document exists in three official versions (English, French, German).
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. HD 631.4 S1:2008 E
---------------------- Page: 3 ----------------------
SIST HD 631.4 S1:2009
HD 631.4 S1:2008 - 2 -
Foreword
This Harmonization Document was prepared by a task force under the direction of WG 11 of CENELEC
TC 20, Electric cables.
As agreed at the Bruges meeting (June 2007), the text of the draft was submitted to the formal vote and
was approved by CENELEC as HD 631.4 S1 on 2008-06-01.
The following dates were fixed:
- latest date by which the existence of the HD
has to be announced at national level (doa) 2008-12-01
- latest date by which the HD has to be implemented
at national level by publication of a harmonized
national standard or by endorsement (dop) 2009-06-01
- latest date by which the national standards conflicting
with the HD have to be withdrawn (dow) 2011-06-01
HD 631 will have 4 parts:
Part 1: Fingerprinting and type tests for resinous compounds
Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications
Part 3: Fingerprinting for heat shrinkable components for medium voltage applications from
3,6/6 (7,2) kV up to 20,8/36 (42) kV
Part 4: Fingerprinting for cold shrinkable components for low and medium voltage applications up to
20,8/36 (42) kV
Fingerprinting of sealant components which are delivered as non heat shrinkable items, but that have an
important interfacing role, is under consideration.
NOTE It has been assumed in the preparation of this document that the execution of its provisions will be entrusted to
appropriately qualified and experienced people, for whose use it has been produced.
WARNING This Harmonization Document calls for the use of substances and/or procedures that may be
injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not
absolve the user from legal obligations relating to health and safety at any stage.
_____________
---------------------- Page: 4 ----------------------
SIST HD 631.4 S1:2009
- 3 - HD 631.4 S1:2008
Contents
1 Sc op e . . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Fingerprinting . 6
4.1 General . 6
4.2 Sampling . 6
4.3 Preparation and conditioning . 6
4.4 Tests . 6
4.5 Test report . 6
Annex A (informative) - Health and safety . 8
Table 1 - Test methods and requirements . 7
---------------------- Page: 5 ----------------------
SIST HD 631.4 S1:2009
HD 631.4 S1:2008 - 4 -
1 Scope
This Harmonization Document specifies the test methods and requirements for fingerprinting (as
defined in 3.11) of cold shrinkable components intended to be used in cable accessories for low
and medium voltage, as defined in EN 50393, HD 629.1 and HD 629.2.
Fingerprinting of materials does not have a mandatory link to type testing of accessories. It shall
be regarded as a stand-alone test, but may be carried out in combination with the accesso
...
6/29(16., R6,67SU+'6
35('67$1'$5'
GHFHPEHU
(OHNWULþQLNDEOL±3ULERU±=QDþLOQRVWLPDWHULDORY±GHO )LQJHUSULQWLQJ]D
KODGQRVNUþOMLYHVHVWDYQHGHOH]DXSRUDERYQL]NRLQVUHGQMHQDSHWRVWQLK
VLVWHPLKGRYNOMXþQR N9
(OHFWULFDOFDEOHV$FFHVVRULHV
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.