SIST EN 12637-1:2004

Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete

This Part of this European Standard describes the method for determining the compatibility with concrete of polyurethane injection products, or other elastic injection products likely to be sensitive to the effects of the alkalis in concrete. This standard describes the reference procedure.
In the case of polyurethane products, this method is only suitable for final injection products (i.e. not water-stopping foams).

Produkte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Verträglichkeit von Rissfüllstoffen - Teil 1: Verträglichkeit mit Beton

Diese Dokument legt ein Verfahren zur Bestimmung der Betonverträglichkeit von Rissfüllstoffen aus Polyurethan oder von anderen elastischen Rissfüllstoffen fest, die empfindlich auf die Einwirkung von Alkali in Beton reagieren können. Die vorliegende Norm beschreibt das Referenzverfahren.
Bei Rissfüllstoffen aus Polyurethan ist dieses Verfahren nur für ausgehärtete Rissfüllstoffe geeignet (d. h. nicht für wasserstoppende Schäume).

Produits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Compatibilité des produits d'injection - Partie 1: Compatibilité avec le béton

Le présent document décrit la méthode de détermination de la compatibilité des produits d'injection en polyuréthanne avec le béton, ou d'autres produits d'injection susceptibles d'etre sensibles aux effets des éléments alcalins contenus dans le béton. Cette norme décrit le mode opératoire de référence.
Pour les produits a base de polyuréthanne, cette méthode ne convient qu'aux produits destinés a l'injection finale (c'est-a-dire pas les mousses pour arret de venue d'eau).

Proizvodi in sistemi za zaščito in popravilo betonskih konstrukcij – Preskusne metode – Združljivost injekcijske mase – 1. del: Združljivost z betonom

General Information

• Status: Published
• Publication Date: 30-Nov-2004
• ICS: 91.080.40 - Concrete structures
• Technical Committee: BBB - Concrete, reinforced concrete and prestressed concrete
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2004
• Due Date: 01-Dec-2004
• Completion Date: 01-Dec-2004
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 12637-1:2004 - Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.HWRQRPProdukte und Systeme für den Schutz und die Instandsetzung von Betontragwerken - Prüfverfahren - Verträglichkeit von Rissfüllstoffen - Teil 1: Verträglichkeit mit BetonProduits et systemes pour la protection et la réparation des structures en béton - Méthodes d'essai - Compatibilité des produits d'injection - Partie 1: Compatibilité avec le bétonProducts and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete91.080.40Betonske konstrukcijeConcrete structuresICS:Ta slovenski standard je istoveten z:EN 12637-1:2004SIST EN 12637-1:2004en01-december-2004SIST EN 12637-1:2004SLOVENSKI
STANDARD



SIST EN 12637-1:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12637-1August 2004ICS 91.080.40English versionProducts and systems for the protection and repair of concretestructures - Test methods - Compatibility of injection products -Part 1: Compatibility with concreteProduits et systèmes pour la protection et la réparation desstructures en béton - Méthodes d'essai - Compatibilité desproduits d'injection - Partie 1: Compatibilité avec le bétonProdukte und Systeme für den Schutz und dieInstandsetzung von Betontragwerken - Prüfverfahren -Verträglichkeit von Rissfüllstoffen - Teil 1: Verträglichkeitmit BetonThis European Standard was approved by CEN on 27 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12637-1:2004: ESIST EN 12637-1:2004



EN 12637-1:2004 (E)
2 Contents page Foreword.3 1 Scope.4 2 Normative references.4 3 Test principle.4 4 General requirements.4 4.1 Apparatus.4 4.2 Materials.4 5 Test procedure.5 5.1 Description and design of the mould.5 5.2 Mixing of components.5 5.3 Casting the specimens.5 5.4 Storage of the specimens.5 6 Mechanical properties : evaluation after storage.6 7 Interpretation of results.6 8 Test report.6 SIST EN 12637-1:2004



EN 12637-1:2004 (E) 3 Foreword This document (EN 12637-1:2004) has been prepared by Technical Committee CEN /TC 104, "Concrete and related products", the secretariat of which is held by DIN. It has been drafted by Sub-Committee 8 "Products and systems for the protection and repair of concrete structures" (Secretariat AFNOR). This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2005, and conflicting national standards shall be withdrawn at the latest by February 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 12637-1:2004



EN 12637-1:2004 (E)
4 1 Scope This document describes the method for determining the compatibility with concrete of polyurethane injection products, or other elastic injection products likely to be sensitive to the effects of the alkalis in concrete. This document describes the reference procedure. In the case of polyurethane products, this method is only suitable for final injection products (i.e. not water-stopping foams). 2 Normative references The following ref
...