Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item

This document specifies a method of test for determining the reaction to fire performance of construction products excluding floorings, and excluding products which are indicated in Delegated Regulation (EU) 2016/364, when exposed to thermal attack by a single burning item (SBI). The calculation procedures are given in Annex A. Information on the precision of the test method is given in Annex B. The calibration procedures are given in Annexes C and D, of which Annex C is a normative annex.
NOTE   This document has been developed to determine the reaction to fire performance of essentially flat products. The treatment of some families of products, e.g. linear products (pipes, ducts, cables etc.), can need special rules.

Prüfungen zum Brandverhalten von Bauprodukten - Thermische Beanspruchung durch einen einzelnen brennenden Gegenstand für Bauprodukte mit Ausnahme von Bodenbelägen

Essais de réaction au feu des produits de construction - Produits de construction à l’exclusion des revêtements de sol exposés à une sollicitation thermique provoquée par un objet isolé en feu

No scope available

Preskusi odziva gradbenih proizvodov na ogenj - Gradbeni proizvodi razen talnih oblog, izpostavljeni toplotnemu delovanju enega samega gorečega predmeta

General Information

Status
Not Published
Public Enquiry End Date
05-Sep-2021
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
11-Jun-2021
Due Date
29-Oct-2021

RELATIONS

Buy Standard

Amendment
SIST EN 13823:2020/oprA1:2021
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13823:2020/oprA1:2021
01-september-2021
Preskusi odziva gradbenih proizvodov na ogenj - Gradbeni proizvodi razen talnih
oblog, izpostavljeni toplotnemu delovanju enega samega gorečega predmeta

Reaction to fire tests for building products - Building products excluding floorings

exposed to the thermal attack by a single burning item
Prüfungen zum Brandverhalten von Bauprodukten - Thermische Beanspruchung durch
einen einzelnen brennenden Gegenstand für Bauprodukte mit Ausnahme von
Bodenbelägen

Essais de réaction au feu des produits de construction - Produits de construction à

l’exclusion des revêtements de sol exposés à une sollicitation thermique provoquée par

un objet isolé en feu
Ta slovenski standard je istoveten z: EN 13823:2020/prA1
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.01 Stavbni elementi na splošno Elements of buildings in
general
91.100.01 Gradbeni materiali na Construction materials in
splošno general
SIST EN 13823:2020/oprA1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13823:2020/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 13823:2020/oprA1:2021
DRAFT
EUROPEAN STANDARD
EN 13823:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
April 2021
ICS 13.220.50; 91.060.01; 91.100.01
English Version
Reaction to fire tests for building products - Building
products excluding floorings exposed to the thermal attack
by a single burning item

Essais de réaction au feu des produits de construction - Prüfungen zum Brandverhalten von Bauprodukten -

Produits de construction à l'exclusion des revêtements Thermische Beanspruchung durch einen einzelnen

de sol exposés à une sollicitation thermique provoquée brennenden Gegenstand für Bauprodukte mit

par un objet isolé en feu Ausnahme von Bodenbelägen

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 127.

This draft amendment A1, if approved, will modify the European Standard EN 13823:2020. If this draft becomes an amendment,

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
Recipients of this draft are invited to submit, with their comments, notific
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.