SIST EN 14904:2006
(Main)Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
This European Standard specifies requirements for surfaces for indoor facilities for multi-sports use. It also covers surface systems which include both their supporting and upper layers whether prefabricated, produced in situ or a combination of the two. It also provides for the evaluation of conformity of products to the requirements of this European Standard. This European Standard is not applicable to indoor tennis halls.
NOTE "Multi-sports" will be defined by appropriate national provisions.
Sportböden - Sportböden für Hallen und Räume mehrfunktionale Sportnutzung und Mehrzwecknutzung - Anforderungen
Diese Europäische Norm legt Anforderungen an Sportböden für Hallen und Räume für Sport und Mehrzwecknutzung fest. Eingeschlossen sind auch Bodensysteme mit Unterkonstruktion und Oberbelägen, die entweder vorgefertigt oder vor Ort gefertigt sind oder durch Kombinierung beider Verfahren gefertigt werden. Ferner wird die Bewertung der Übereinstimmung von Produkten mit den Anforderungen dieser Europäischen Norm festgelegt. Die Europäische Norm gilt nicht für Tennishallen.
ANMERKUNG Der Begriff "Mehrzweck-" ist in den entsprechenden nationalen Festlegungen definiert.
Sols sportifs - Sols multi-sports intérieurs - Spécification
La présente Norme européenne spécifie les exigences relatives aux sols d'installations multi-sports
intérieures. Elle traite également des revêtements se composant à la fois de couches supports et de couches
supérieures préfabriquées, produites sur site ou associant les deux modes de fabrication. Elle fournit
également une évaluation de la conformité des produits aux exigences de la présente Norme européenne. La
présente Norme européenne ne s'applique pas aux cours de tennis couverts.
NOTE Le terme « multisports » sera défini par des dispositions nationales appropriées.
Podloge za športne dejavnosti – Notranje podloge za večnamensko uporabo – Specifikacija
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification6SHFLILNDFLMDSols sportifs - Sols multi-sports intérieurs - SpécificationSportböden - Sportböden für Hallen und Räume mehrfunktionale Sportnutzung und Mehrzwecknutzung - AnforderungenTa slovenski standard je istoveten z:EN 14904:2006SIST EN 14904:2006en,fr,de97.220.10ICS:SLOVENSKI
STANDARDSIST EN 14904:200601-julij-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14904April 2006ICS 97.220.10 English VersionSurfaces for sports areas - Indoor surfaces for multi-sports use -SpecificationSols sportifs - Sols multi-sports intérieurs - SpécificationSportböden - Mehrzweck-Sporthallenböden -AnforderungenThis European Standard was approved by CEN on 2 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14904:2006: E
Resistance to repeated impact of synthetic sports floors.12 Annex B (informative)
Shock absorption and vertical deformation types for elastic sports floors.13 Annex C (normative)
Analysis of pentachlorophenol in sports floor coverings.14 C.1 General.14 C.2 Reagents.14 C.3 Apparatus.14 C.4 Sampling and specimen preparation.14 C.5 Sample extraction and analysis.14 C.6 Expression of results.14 Annex D (normative)
Factory production control.15 D.1 General.15 D.2 Control of raw material.15 D.3 Process control.15 D.4 Calibration plan.15 D.5 Testing of finished products.16 D.6 Inspection and testing status of products.16 D.7 Traceability.16 Annex ZA (informative)
Clauses of this European Standard addressing provisions of the EU Construction Products Directive.17
This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 717-1, Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method EN 717-2, Wood-based panels - Determination of formaldehyde release - Part 2: Formaldehyde release by the gas analysis method EN 1516, Surfaces for sports areas - Determination of resistance to indentation EN 1517, Surfaces for sports areas - Determination of resistance to impact EN 1569, Surfaces for sports areas - Determination of the behaviour under a rolling load EN 12235, Surfaces for sports areas - Determination of vertical ball behaviour EN 12673, Water quality - Gas chromatographic determination of some selected chlorophenols in water EN 13036-4, Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface - The pendulum test EN 13036-7, Road and airfield surface characteristics - Test methods - Part 7: Irregularity measurement of pavement courses - the straightedge test EN 13238, Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates EN 13501-1, Fire classification of construction products and building elements - Part 1: Classification using test data from reaction to fire tests EN 13745, Surfaces for sports areas - Determination of specular reflectance EN 14808, Surfaces for sports areas — Determination of shock absorption EN 14809, Surfaces for sports areas — Determination of vertical deformation EN ISO 2813, Paints and varnishes - Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (ISO 2813:1994, including Technical Corrigendum 1:1997) EN ISO 5470-1, Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999) ISO 1957, Machine-made textile floor coverings - Selection and cutting of specimens for physical tests
1 000 cycles shall be 80 mg.
(25 °C ± 10 °C) and the second and third cleaning cycle with water at ambient temperature without any addition of chemicals. 5.4.4 Classification If a claim for reaction to fire performance is made, the sports floor covering shall be tested and classified according to the requirements of EN 13501-1 and the resulting class and subclass shall be declared. If it is decided to make no claim for reaction to fire performance, i.e. it is decided to place a product or family of products on the market as Class Ffl, no testing is required for this product or family of products. 5.4.5 Product parameters influencing reaction to fire performance The product parameters shown in Table 1 influence the reaction to fire performance of sports floor coverings and this table shall be followed if testing a range of products.
Table 3. NOTE Products of Class E1 can be used without causing an indoor air concentration greater than 0,1 x 10-6 mg/kg (0,1 ppm) of formaldehyde. The test requirement does not apply to sports floor coverings to which no formaldehyde-containing materials were added during production or post-production processing. These need not be classified, but may, without any testing, be declared as Class E1.
Table 2 — Formaldehyde Class E1
Test method Requirement Initial type testing a EN 717-1 Release ≤ 0,124 mg/m3 EN 717-1 Release ≤ 0,124 mg/m3
Factory production control EN 717-2 Release ≤ 3,5 mg/m2h a
For established products, initial type testing may also be carried out on the basis of existing data with EN 717-2 testing, either from factory production control or from external inspection.
Test method Requirement EN 717-1 Release > 0,124 mg/m3
Initial type testing EN 717-2 Release > 3,5 mg/m2h to ≤ 8 mg/m2h EN 717-1 Release > 0,124 mg/m3
Factory production control EN 717-2 Release > 3,5 mg/m2h to ≤ 8 mg/m2h
5.6 Content of pentachlorophenol (PCP) 1) Sports floor coverings shall not contain pentachlorophenol or a derivative thereof as a component in the production process of the product or of its raw materials. In cases where verification is required, if the content is less than 0,1 % by mass by the method described in Annex C, this requirement shall be considered to be met. 5.7 Specular reflectance Where required, the specular reflectance shall be measured using the method described in EN 13745, using an angle of 85°, and the mean value obtained shall be reported. 5.8 Specular gloss When tested by the method described in EN ISO 2813 using an angle of incidence of 85°, the specular gloss shall be ≤ 30 % for matt surfaces and ≤ 45 % for lacquered surfaces. 5.9 Resistance to indentation When tested by the method described in EN 1516, the mean residual indentation measured 5 min after removal of the load shall be reported and the mean residual indentation measured 24 h after removal of the load shall be ≤ 0,5 mm. For area-elastic sports floors, test only the upper layer supported on a rigid structure. 5.10 Resistance to impact After conditioning for 14 day at
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...