SIST EN 17368:2020
(Main)Laminate floor coverings - Determination of impact resistance with small ball
Laminate floor coverings - Determination of impact resistance with small ball
This standard specifies a method of assessment of surface resistance to impact with a small ball tester and relates to the surfaces of laminate floor coverings according to EN 13329, EN 14978 or EN 15468. The test is generally carried out on parts of the laminate floor panels with suitable sizes.
The test method is suitable to make an assessment of the elasticity of the surfaces of the mentioned laminate floor coverings
Laminatfußböden - Beständigkeit gegen Stossbeanspruchung mit Kleine Kugel
Dieses Dokument legt ein Verfahren zur Bewertung der Beständigkeit der Oberfläche gegen Stoßbeanspruchung mit einem Schlagprüfgerät mit kleiner Kugel fest. Es bezieht sich auf die Oberflächen von Laminatböden nach EN 13329, EN 14978 oder EN 15468. Die Prüfung wird im Allgemeinen an Teilen von Laminatfußbodenpaneelen mit geeigneter Größe durchgeführt.
Revêtements de sol tratifié - Détermination de resistance à l'impact à la petite bille
Le présent document spécifie une méthode d’évaluation de la résistance des surfaces aux chocs engendrés par un appareil d’essai à bille de petit diamètre et concerne les surfaces des revêtements de sol stratifiés conformes à l’EN 13329, l’EN 14978 ou l’EN 15468. L’essai est généralement réalisé sur des parties de lames stratifiées de dimensions adéquates.
Laminatne talne obloge - Ugotavljanje odpornosti proti udarcem z majhno kroglo
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17368:2020
01-april-2020
Laminatne talne obloge - Ugotavljanje odpornosti proti udarcem z majhno kroglo
Laminate floor coverings - Determination of impact resistance with small ball
Laminatfußböden - Beständigkeit gegen Stossbeanspruchung mit Kleine Kugel
Revêtements de sol tratifié - Détermination de resistance à l'impact à la petite bille
Ta slovenski standard je istoveten z: EN 17368:2020
ICS:
97.150 Talne obloge Floor coverings
SIST EN 17368:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17368:2020
---------------------- Page: 2 ----------------------
SIST EN 17368:2020
EN 17368
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 97.150
English Version
Laminate floor coverings - Determination of impact
resistance with small ball
Revêtements de sol stratifiés - Détermination de la Laminatböden - Bestimmung der Beständigkeit gegen
résistance aux chocs à l'aide d'une bille de petit Stoßbeanspruchung mit kleiner Kugel
diamètre
This European Standard was approved by CEN on 15 December 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17368:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17368:2020
EN 17368:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Preparing and conditioning of test specimen . 6
7 Test procedure . 6
8 Calculation and expression of results . 7
9 Test report . 8
10 Precision . 8
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 17368:2020
EN 17368:2020 (E)
European foreword
This document (EN 17368:2020) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile and laminate floor coverings”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 17368:2020
EN 17368:2020 (E)
1 Scope
This document specifies a method of assessment of surface resistance to impact with a small ball tester
and relates to the surfaces of laminate floor coverings according to EN 13329, EN 14978 or EN 15468.
The test is generally carried out on parts of the laminate floor panels with suitable sizes.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp/ui
3.1
test panel
laminate panel which is to be tested
3.2
test specimen
part of the test panel used for testing
3.3
test field
part of test surface affected by the impact stress and evaluated
4 Principle
The surfaces
...
SLOVENSKI STANDARD
oSIST prEN 17368:2019
01-marec-2019
Laminatne talne obloge - Ugotavljanje odpornosti proti udarcem z majhno kroglo
Laminate floor coverings - Determination of impact resistance with small ball
Laminatfußböden - Beständigkeit gegen Stossbeanspruchung mit Kleine Kugel
Revêtements de sol tratifié - Détermination de resistance à l'impact à la petite bille
Ta slovenski standard je istoveten z: prEN 17368
ICS:
97.150 Talne obloge Floor coverings
oSIST prEN 17368:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17368:2019
---------------------- Page: 2 ----------------------
oSIST prEN 17368:2019
DRAFT
EUROPEAN STANDARD
prEN 17368
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2019
ICS 97.150
English Version
Laminate floor coverings - Determination of impact
resistance with small ball
Élément introductif - Élément central - Élément Laminatfußboden - Bestimmung der Stoßfestigkeit mit
complémentaire kleiner Kugel
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17368:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17368:2019
prEN 17368:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Preparing of test specimen and Conditioning . 6
7 Test procedure . 6
8 Calculation and expression of results . 7
9 Test report . 8
10 Precision . 8
2
---------------------- Page: 4 ----------------------
oSIST prEN 17368:2019
prEN 17368:2019 (E)
European foreword
This document (prEN 17368:2019) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile and laminate floor coverings”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
3
---------------------- Page: 5 ----------------------
oSIST prEN 17368:2019
prEN 17368:2019 (E)
1 Scope
This document specifies a method of assessment of surface resistance to impact with a small ball tester
and relates to the surfaces of laminate floor coverings according to EN 13329, EN 14978 or EN 15468.
The test is generally carried out on parts of the laminate floor panels with suitable sizes.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1
test panel
laminate panel which is to be tested
3.2
test specimen
part of the test panel used for testing
3.3
test field
the part of test surface affected by the impact stress and evaluated
4 Principle
The surfaces are tested by application of impacts by means of a defined dropping weight, which has a
spherical impact head with a diameter of 10 mm. The points of impacts are visually examined for
damage. The test intensity is raised by gradually changing the falling height of the impact head until at
least 1 of 5 impacts at the same falling height leads to a surface damage. The impact resistance is the
highest falling heigh
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.