Explosives for civil uses - High explosives - Part 10: Method for the verification of the means of initiation

This European Standard specifies a method for the verification of the initiation of a high explosive by a specified initiation system.
This method is applicable to high explosives in cartridge or bulk form, both unconfined and confined.

Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 10: Überprüfung der Zündweise

Explosifs à usage civil - Explosifs - Partie 10: Méthode de vérification du moyen d'amorçage

Eksplozivi za civilno uporabo – Razstreliva – 10. del: Metoda za overjanje načina aktiviranja

General Information

Status
Not Published
Public Enquiry End Date
02-May-2021
Technical Committee
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
03-Mar-2021
Due Date
21-Jul-2021
Completion Date
07-May-2021

Relations

Buy Standard

Draft
prEN 13631-10:2021
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13631-10:2021
01-april-2021
Eksplozivi za civilno uporabo – Razstreliva – 10. del: Metoda za overjanje načina
aktiviranja
Explosives for civil uses - High explosives - Part 10: Method for the verification of the
means of initiation
Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 10: Überprüfung der Zündweise
Explosifs à usage civil - Explosifs - Partie 10: Méthode de vérification du moyen
d'amorçage
Ta slovenski standard je istoveten z: prEN 13631-10
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13631-10:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13631-10:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13631-10:2021


DRAFT
EUROPEAN STANDARD
prEN 13631-10
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13631-10:2003
English Version

Explosives for civil uses - Explosives - Part 10: Method for
the verification of the means of initiation of explosives
Explosifs à usage civil - Explosifs - Partie 10: Méthode Explosivstoffe für zivile Zwecke - Explosivstoffe - Teil
de vérification du moyen d'amorçage des explosifs 10: Überprüfung der Zündweise von Explosivstoffen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13631-10:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13631-10:2021
prEN 13631-10:2021 (E)
Contents Page

European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Test pieces . 6
6.1 Cartridged Explosives . 6
6.2 Bulk explosive . 6
6.3 Boosters . 7
6.4 Assembly of the test piece and means of initiation . 7
6.4.1 General. 7
6.4.2 Initiation by detonator. 7
6.4.3 Initiation with detonating cord . 7
6.4.4 Initiation by detonating cord . 8
7 Procedure . 8
7.1 Measurement procedure . 8
7.2 Testing of cartridged explosives . 8
8 Test report . 9
Annex ZA (informative) Relationship between this European Standard and the essential
safety requirements of Directive 2014/28/EU relating to the making available on
the market and supervision of explosives for civil uses aimed to be covered . 10
Bibliography . 11


2

---------------------- Page: 4 ----------------------
oSIST prEN 13631-10:2021
prEN 13631-10:2021 (E)
European foreword
This document (prEN 13631-10:2021) has been prepared by Technical Committee CEN/TC 321
“Explosives for civil uses”, the secretariat of which is held by UNE.
This document is currently submitted for the CEN Enquiry.
This document will supersede EN 13631-10:2003.
In comparison with the previous edition, the following technical modifications have been made:
a) the main element of the document’s title has been changed from “High explosives” to “Explosives”;
b) the normative references have been updated;
c) the description of the preparatory steps and for performing the test have been clearly separated;
d) Annex A, Range of applicability of the test method, has been removed and the content has been
moved to Clause 1, Scope;
e) Annex ZA has been updated.
This document has been prepared under a Standardization Request (M/562) annexed to the
Commission Implementing Decision C(2019)6634 final as regards Explosives for civil uses given to CEN
by the European Commission and the European Free Trade Association, and supports Essential Safety
requirements of Directive 2014/28/EU.
For relationship with Directive 2014/28/EU, see informative Annex ZA, which is an integral part of this
document.
EN 13631, Explosives for civil uses — Explosives, is currently composed with the following parts:
— Part 1: Requirements
— Part 2: Determination of thermal stability of explosives
— Part 3: Determination of sensitiveness to friction of explosives
— Part 4: Determination of sensitiveness to impact of explosives
— Part 5: Determination of resistance of explosives to water
— Part 6: Determination of resistance of explosives to hydrostatic pressure
— Part 7: Determination of safety and reliability of explosives at extreme temperatures
— Part 10: Method for the verification of the means of initiation of explosives
— Part 11: Determination of transmission of detonation of explosives
— Part 13: Determination of density of explosives
— Part 14: Determination of velocity of detonation of explosives
3

---------------------- Page: 5 ----------------------
oSIST prEN 13631-10:2021
prEN 13631-10:2021 (E)
1 Scope
This document specifies a method for the verification of the initiation of an explosive, excluding black
powder, by a specified means of initiation.
Applicability of the test method is under environmental conditions of a field test range or blast bunker.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
prEN 13630-7:2021, Explosives for civil uses — Detonating cords and safety fuses — Part 7:
Determination of the reliability of initiation of detonating cords
prEN 13631-13:2021, Explosives for civil uses —Explosives — Part 14: Method for the determination of
velocity of detonation
prEN 13631-14:2021, Explosives for civil uses —Explosives — Part 14: Method for the determination of
velocity of detonation
prEN 13857-1:2021, Explosives for civil uses — Part 1: Terminology
EN 10025-2:2005, Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-
alloy structural steels
3 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN 13857-1:2021 apply.
4 Principle
The explosive is initiated using the means of initiation foreseen by the manufacturer, e.g. detonator,
booster or detonating cord. The test is successful when complete detonation of the explosive is
observed.
5 Apparatus
5.1 Means of initiation, as specified by the explosives’ manufacturer.
5.2 Steel tubes: the dimensions of the steel tubes shall be in accordance with Table 1.
The steel quality shall be structural steel with a minimum yield strength of 235 MPa at 16 mm, which is
specified in accordance with EN 10025-2:2005 as “S 235 xx”.
In case of cartridged explosives, the internal diameter of the steel tube shall be the smallest where the
cartridges still can be inserted into it without difficulty.
In case of bulk explosives, the internal diameter of the steel tube shall be the nearest diameter equal or
less to the smallest diameter which the manufacturer specifies for use of the bulk explosive.
4

---------------------- Page: 6 ----------------------
oSIST prEN 13631-10:2021
prEN 13631-10:2021 (E)
In case the start-stop-method (prEN 13631-14:2021, 5.4.1) is used, holes shall be drilled in the tube to
allow the insertion of the sensors of the measuring equipment at positions in accordance to 6.2. The
diameter of the holes shall be no larger than to allow the insertion of the sensors (prEN 13631-14:2021,
5.4.1).
Table 1 — Dimensions of steel tubes
Internal diameter Wall thickness
[mm] [mm]
17,3 2,0
22,9 2,0
29,1 2,3
37,2 2,6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.