SIST ISO 2834:2002

Graphic technology -- Test print preparation for offset and letterpress inks

Technologie graphique -- Réalisation d'impressions pour encres pour offset et typographie

Grafična tehnologija - Izdelava preskusnih odtisov z ofsetnimi in knjigotiskarskimi barvami

General Information

• Status: Withdrawn
• Publication Date: 31-Oct-2002
• Withdrawal Date: 01-Mar-2010
• ICS: 87.080 - Inks. Printing inks
• Technical Committee: GRT - Graphical technology
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 01-Mar-2010
• Due Date: 24-Mar-2010
• Completion Date: 02-Mar-2010
• Ref Project: ISO 2834:1999 - Graphic technology — Test print preparation for offset and letterpress inks

Relations

• Replaced By: SIST ISO 2834-1:2008 - Graphic technology – Laboratory preparation of test prints – Part 1: Paste inks in
• Effective Date: 01-Apr-2010
• Replaced By: SIST ISO 2834-2:2008 - Graphic technology - Laboratory preparation test prints - Part 2: Liquid printing inks
• Effective Date: 01-Apr-2010
• Replaced By: SIST ISO 2834-3:2010 - Graphic technology - Laboratory preparation of test prints - Part 3: Screen printing inks
• Effective Date: 01-May-2010
• Replaces: SIST ISO 2834:1996 - Printing inks -- Preparation of standardized prints for determination of resistance to physical and chemical agents
• Effective Date: 01-Nov-2002

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 2834
Third edition
1999-10-15
Graphic technology — Test print
preparation for offset and letterpress inks
Technologie graphique — Réalisation d'impressions pour encres pour offset
et typographie
A
Reference number
ISO 2834:1999(E)

---------------------- Page: 1 ----------------------
ISO 2834:1999(E)
Contents Page
1 Scope .1
2 Normative references .1
3 Test method.1
3.1 Principle.1
3.2 Apparatus .1
3.2.1 Printing .1
3.2.2 Printing forme .1
3.2.3 Analytical balance.2
3.3 Materials .2
3.3.1 Printing ink .2
3.3.2 Substrate .2
4 Procedure .2
4.1 Printing .2
4.1.1 Inking of the printing forme.2
4.1.2 Prints for optical tests.2
4.1.3 Evaluation.3
4.1.4 Ink film thickness.3
4.1.5 Drying.3
4.1.6 Provisions for heat-set and waterless inks.3
4.2 Other method .3
5 Report .4
Annex A (informative) Reference substrate for optical tests.5
Bibliography.7
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
© ISO
ISO 2834:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 2834 was prepared by Technical Committee ISO/TC 130, Graphic technology.
This third edition cancels and replaces the second edition (ISO 2834:1981), of which it constitutes a technical
revision.
Annex A of this International Standard is for information only.
iii

---------------------- Page: 3 ----------------------
© ISO
ISO 2834:1999(E)
Introduction
This International Standard is a combination of two previous International Standards ISO 2834 describing conditions
for testing the resistance of printing inks to physical and chemical attack and ISO 5737 specifying a method for
preparation of test prints for optical tests. The necessary revision of these two International Standards resulted in
one International Standard exclusively describing the test print preparation for paste inks because for low viscosity
gravure or flexo inks no method exists for reproducible preparation of test prints. If tests are done only for
mechanical and chemical resistance the user may apply other less accurate methods. The methods described in
this International Standard are used in other International Standards, such as ISO 2846-1, ISO 2846-2, ISO 2836,
ISO 2837 and ISO 11628.
iv

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD  © ISO ISO 2834:1999(E)
Graphic technology — Test print preparation for offset and
letterpress inks
1 Scope
This International Standard specifies a test method for preparation of test prints and/or test samples produced with
paste inks, such as for offset and letterpress printing. The test prints shall serve for optical tests, such as
colorimetry, transparency and reflection density. They may also be used for testing the resistance of printing inks to
mechanical and chemical attack regarding either printing ink and/or substrate.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, any of these
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent edition of the normative document indicated below. For
undated references, the lat
...

SLOVENSKI STANDARD
SIST ISO 2834:2002
01-november-2002
*UDILþQDWHKQRORJLMD,]GHODYDSUHVNXVQLKRGWLVRY]RIVHWQLPLLQNQMLJRWLVNDUVNLPL
EDUYDPL
Graphic technology - Test print preparation for offset and letterpress inks
Ta slovenski standard je istoveten z:
ICS:
87.080 Barvila. Tiskarske barve Inks. Printing inks
SIST ISO 2834:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

INTERNATIONAL ISO
STANDARD 2834
Third edition
1999-10-15
Graphic technology — Test print
preparation for offset and letterpress inks
Technologie graphique — Réalisation d'impressions pour encres pour offset
et typographie
A
Reference number
ISO 2834:1999(E)

---------------------- Page: 2 ----------------------

ISO 2834:1999(E)
Contents Page
1 Scope .1
2 Normative references .1
3 Test method.1
3.1 Principle.1
3.2 Apparatus .1
3.2.1 Printing .1
3.2.2 Printing forme .1
3.2.3 Analytical balance.2
3.3 Materials .2
3.3.1 Printing ink .2
3.3.2 Substrate .2
4 Procedure .2
4.1 Printing .2
4.1.1 Inking of the printing forme.2
4.1.2 Prints for optical tests.2
4.1.3 Evaluation.3
4.1.4 Ink film thickness.3
4.1.5 Drying.3
4.1.6 Provisions for heat-set and waterless inks.3
4.2 Other method .3
5 Report .4
Annex A (informative) Reference substrate for optical tests.5
Bibliography.7
©  ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 3 ----------------------

© ISO
ISO 2834:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 2834 was prepared by Technical Committee ISO/TC 130, Graphic technology.
This third edition cancels and replaces the second edition (ISO 2834:1981), of which it constitutes a technical
revision.
Annex A of this International Standard is for information only.
iii

---------------------- Page: 4 ----------------------

© ISO
ISO 2834:1999(E)
Introduction
This International Standard is a combination of two previous International Standards ISO 2834 describing conditions
for testing the resistance of printing inks to physical and chemical attack and ISO 5737 specifying a method for
preparation of test prints for optical tests. The necessary revision of these two International Standards resulted in
one International Standard exclusively describing the test print preparation for paste inks because for low viscosity
gravure or flexo inks no method exists for reproducible preparation of test prints. If tests are done only for
mechanical and chemical resistance the user may apply other less accurate methods. The methods described in
this International Standard are used in other International Standards, such as ISO 2846-1, ISO 2846-2, ISO 2836,
ISO 2837 and ISO 11628.
iv

---------------------- Page: 5 ----------------------

INTERNATIONAL STANDARD  © ISO ISO 2834:1999(E)
Graphic technology — Test print preparation for offset and
letterpress inks
1 Scope
This International Standard specifies a test method for preparation of test prints and/or test samples produced with
paste inks, such as for offset and letterpress printing. The test prints shall serve for optical tests, such as
colorimetry, transparency and reflection density. They may also be used for testing the resistance of printing inks to
mechanical and chemical attack regarding either printing ink and/or substrate.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references
...