oSIST prEN 13445-14:2025
(Main)Unfired pressure vessels - Part 14: Additional requirements for pressure equipment and pressure components fabricated with additive manufacturing methods
Unfired pressure vessels - Part 14: Additional requirements for pressure equipment and pressure components fabricated with additive manufacturing methods
This document specifies general requirements for the application of additive manufacturing processes for pressure vessels and parts.
Separate Annexes of this document provide detailed requirements for specific additive manufacturing processes and materials.
This document is currently limited to metallic material applications. If a pressure part manufactured to this document is integrated into a pressure vessel, all parts of EN 13445 apply for this integration.
Unbefeuerte Druckbehälter - Teil 14: Zusätzliche Anforderungen an additiv gefertigte Druckgeräte und deren Bauteile
Récipients sous pression non soumis à la flamme - Partie 14 : exigences complémentaires pour équipement et composants sous pression obtenus par fabrication additive
Nekurjene tlačne posode - 14. del: Dodatne zahteve za tlačno opremo in dele pod tlakom, narejene z dodajalno izdelavo
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Nekurjene tlačne posode - 14. del: Dodatne zahteve za tlačno opremo in dele pod
tlakom, narejene z dodajalno izdelavo
Unfired pressure vessels - Part 14: Additional requirements for pressure equipment and
pressure components fabricated with additive manufacturing methods
Unbefeuerte Druckbehälter - Teil 14: Zusätzliche Anforderungen an additiv gefertigte
Druckgeräte und deren Bauteile
Récipients sous pression non soumis à la flamme - Partie 14 : exigences
complémentaires pour équipement et composants sous pression obtenus par fabrication
additive
Ta slovenski standard je istoveten z: prEN 13445-14
ICS:
23.020.32 Tlačne posode Pressure vessels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2024
ICS
English Version
Unfired pressure vessels - Part 14: Additional
requirements for pressure equipment and pressure
components fabricated with additive manufacturing
methods
Récipients sous pression non soumis à la flamme - Unbefeuerte Druckbehälter - Teil 14: Zusätzliche
Partie 14 : exigences complémentaires pour Anforderungen an additiv gefertigte Druckgeräte und
équipement et composants sous pression obtenus par deren Bauteile
fabrication additive
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 54.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13445-14:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 General requirements . 12
5 Materials . 13
5.1 General requirements . 13
5.1.1 General requirements for establishing mechanical properties . 13
5.1.2 Materials with specified mechanical data . 13
5.1.3 Materials where mechanical properties of the processed parts are specified by the
part manufacturer . 13
5.1.4 Material data for establishing the design reference value R . 13
r
5.2 Material documentation . 14
5.3 Methodology for the certification of material . 14
5.4 Contents of the particular material appraisal (PMA) . 14
5.5 Avoidance of low brittle fracture . 14
6 Design . 14
6.1 General. 14
6.2 Nominal design stress . 15
6.3 Design by experimental method . 15
7 Fabrication . 16
7.1 General. 16
7.2 Quality management system route for verification of the process . 16
7.3 Direct inspection route for the verification process . 16
7.4 Heat treatment . 16
7.5 Identification system . 17
7.6 Permanent joining of AM components . 17
8 Inspection and testing . 17
8.1 General. 17
8.2 Non-destructive and destructive testing . 17
8.3 Marking and documentation . 18
8.3.1 General. 18
8.3.2 Marking and documentation of components . 18
Annex A (normative) Powder bed fusion (PBF) . 19
A.1 Requirements for PBF (all materials) . 19
A.2 PBF for steels . 32
A.3 PBF for aluminium alloys . 35
A.4 PBF for nickel alloys . 35
Annex B (normative) Directed energy deposition (DED) . 40
B.1 Requirements for DED wire (all materials) . 40
B.2 DED for steel . 56
B.3 DED for aluminium . 77
B.4 DED for nickel alloy . 93
B.5 DED for titanium alloy . 93
B.6 DED copper alloy . 93
B.7 DED for zirconium alloy . 93
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/68/EU aimed to be covered . 94
Bibliography . 95
European foreword
This document (prEN 13445-14:2024) has been prepared by Technical Committee CEN/TC 54 “Unfired
pressure vessels”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Introduction
This document is applicable to unfired pressure vessels or parts of pressure vessels made with additive
manufacturing (AM) processes.
This document is organized in a main part common to all additive manufacturing processes and
normative Annexes A to D.
Those Annexes are dedicated to specific AM processes and contain requirements relevant to specific
materials.
In this first edition of this document, only Annex A and Annex B are available. The other Annexes will be
added to this document during amendment or revision as they are completed.
The structure of the specific Annexes is described in Table 1.
Table 1 — Structure of Annexes of this document
Annex Annex A Annex B Annex C Annex D
DED using DED using
Powder Binder
AM Process wire powder
bed fusion jetting
feedstock feedstock
General A1 B1 C1 D1
Steel A2 B2 C2 D2
Aluminum
A3 B3 C3 D3
alloys
Nickel base
A4 B4 C4 D4
alloys
Materials
Titanium
A5 B5 C5 D5
alloys
Copper
A6 B6 C6 D6
alloys
Zirconium
A7 B7 C7 D7
alloys
1 Scope
This document specifies general requirements for the application of additive manufacturing processes
for pressure vessels and parts.
Separate Annexes of this document provide detailed requirements for specific additive manufacturing
processes and materials.
This document is currently limited to metallic material applications. If a pressure part manufactured to
this document is integrated into a pressure vessel, all parts of EN 13445 apply for this integration.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 764-4:2014, Pressure equipment — Part 4: Establishment of technical delivery conditions for metallic
materials
EN 764-5:2014, Pressure equipment — Part 5: Inspection documentation of metallic materials and
compliance with the material specification
EN 10204:2004, Metallic products — Types of inspection documents
EN 13445-1:2021, Unfired pressure vessels — Part 1: General
EN 13445-2:2021+A1:2023, Unfired pressure vessels — Part 2: Materials
EN 13445-3:2021, Unfired pressure vessels — Part 3: Design
EN 13445-4:2021+A1:2023, Unfired pressure vessels — Part 4: Fabrication
EN 13445-5:2021+A1:2024, Unfired pressure vessels — Part 5: Inspection and testing
EN 13445-8:2021, Unfired pressure vessels — Part 8: Additional requirements for pressure vessels of
aluminium and aluminium alloys
EN 13445-10:2021, Unfired pressure vessels — Part 10: Additional requirements for pressure vessels of
nickel and nickel alloys
EN 14532-1:2004, Welding consumables — Test methods and quality requiremen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.