iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN ISO 10286:2024

(Main)

Gas cylinders - Vocabulary (ISO/DIS 10286:2024)

Gas cylinders - Vocabulary (ISO/DIS 10286:2024)

This document defines terms for gas cylinders.

Gasflaschen - Vokabular (ISO/DIS 10286:2024)

Dieses Dokument legt Begriffe für Gasflaschen fest.

Bouteilles à gaz - Vocabulaire (ISO/DIS 10286:2024)

Le présent document définit les termes pour les bouteilles à gaz.

Plinske jeklenke - Terminologija (ISO/DIS 10286:2024)

General Information

Status
Not Published
Public Enquiry End Date
01-Jul-2024
ICS
01.040.23 - Fluid systems and components for general use (Vocabularies)
23.020.35 - Gas cylinders
Technical Committee
TLP - Pressure vessels
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
19-Apr-2024
Due Date
06-Sep-2024
Completion Date
06-May-2024
Directive
2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
Mandate
M/TDG - Standards for referencing in the RID-ADR
Ref Project
prEN ISO 10286 - Gas cylinders - Vocabulary (ISO/DIS 10286:2024)

Relations

Revises
SIST EN ISO 10286:2022 - Gas cylinders - Vocabulary (ISO 10286:2021)
Effective Date
01-Jun-2024

Buy Standard

prEN ISO 10286:2024prEN ISO 10286:2024
PreviousNext
Draft
prEN ISO 10286:2024
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 10286:2024
01-junij-2024
Plinske jeklenke - Terminologija (ISO/DIS 10286:2024)
Gas cylinders - Vocabulary (ISO/DIS 10286:2024)
Gasflaschen - Vokabular (ISO/DIS 10286:2024)
Bouteilles à gaz - Vocabulaire (ISO/DIS 10286:2024)
Ta slovenski standard je istoveten z: prEN ISO 10286
ICS:
01.040.23 Tekočinski sistemi in sestavni Fluid systems and
deli za splošno rabo (Slovarji) components for general use
(Vocabularies)
23.020.35 Plinske jeklenke Gas cylinders
oSIST prEN ISO 10286:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 10286:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 10286:2024
DRAFT
International
Standard
ISO/DIS 10286
ISO/TC 58
Gas cylinders — Vocabulary
Secretariat: BSI
Bouteilles à gaz — Vocabulaire
Voting begins on:
Gasflaschen — Vokabular
2024-04-11
ICS: 23.020.35; 01.040.23
Voting terminates on:
2024-07-04
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 10286:2024(en)
© ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 10286:2024
DRAFT
ISO/DIS 10286:2024(en)
International
Standard
ISO/DIS 10286
ISO/TC 58
Gas cylinders — Vocabulary
Secretariat: BSI
Bouteilles à gaz — Vocabulaire
Voting begins on:
Gasflaschen — Vokabular
ICS: 23.020.35; 01.040.23
Voting terminates on:
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 10286:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii

---------------------- Page: 4 ----------------------
oSIST prEN ISO 10286:2024
ISO/DIS 10286:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10286:2022(Main)
Gas cylinders - Vocabulary (ISO 10286:2021)
EN ISO 10286:2021

This document defines terms for gas cylinders.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 10286:2022(Main)
Gas cylinders - Vocabulary (ISO 10286:2021)
EN ISO 10286:2021

This document defines terms for gas cylinders.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60079-0:2018/A11:2024(Amendment)
Explosive atmospheres - Part 0: Equipment - General requirements
EN IEC 60079-0:2018/A11:2024

Creating an amendment on European level to mirror the IEC interpretation sheet of IEC 60079-0:2017/ISH1:2019 and IEC 60079-0:2017/ISH2:2019 which are both active at IEC.

  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 747-2:2024(Main)
Furniture - Bunk beds and high beds - Part 2: Test methods
EN 747-2:2024

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use. The tests apply to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in prEN 747-1:2022.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17430:2024(Main)
Chemical disinfectants and antiseptics - Hygienic handrub virucidal - Test method and requirements (phase 2, step 2)
EN 17430:2024

This European Standard specifies a test method simulating practical conditions for establishing whether a
product for hygienic handrub reduces the release of virus contamination on hands when rubbed onto the
artificially contaminated hands of volunteers.
NOTE 1 Attention is drawn to the fact that tests on human volunteers are the subject of legal provisions in
certain European countries/regions.
This European Standard applies to products for hygienic handrub for use in areas and situations where
disinfection is medically indicated. Such indications occur in patient care, for example:
– in hospitals, in community medical facilities and in dental institutions;
– in clinics of schools, of kindergardens and of nursing homes.
and may occur in the workplace and in the home. It may also include services such as laundries and kitchens
supplying products directly for the patient.
EN 14885 specifies in detail the relationship of the various tests to one another and to “use recommendations”.
NOTE 2 This method corresponds to a phase 2, step 2 test.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60437:2024(Main)
Radio interference test on high-voltage insulators (IEC 60437:2023)
EN IEC 60437:2024

IEC 60437:2023 specifies the procedure for a radio interference (RI) test carried out in a laboratory on clean and dry insulators at a frequency of 0,5 MHz or 1 MHz or, alternatively, at other frequencies between 0,5 MHz and 2 MHz.
This document applies to insulators for use on AC or DC overhead power lines and overhead traction lines with a nominal voltage greater than 1 000 V.
This third edition cancels and replaces the second edition published in 1997. This third edition cancels and replaces the second edition published in 1997. This edition includes the following significant technical changes with respect to the previous edition:
a) Composite station post and composite hollow core station post insulators have been included;
b) All paragraphs of Samples test were actualized;
c) Sample test fast procedure was introduced.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 747-1:2024(Main)
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
EN 747-1:2024

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It applies to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor. Safety requirements for other products included in a bunk bed/high bed, for example a table or storage furniture, are not included in this document.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
The document contains one annex:
-   Annex A (informative) - Rationales.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60079-7:2016/A11:2024(Amendment)
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
EN 60079-7:2015/A11:2024

Creating an amendment on European level to mirror the IEC interpretation sheet of IEC 60079-7:2015/ISH1:2016 which is still active at IEC.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14067-4:2024(Main)
Railway applications - Aerodynamics - Part 4: Requirements and assessment procedures for aerodynamics on open track
EN 14067-4:2024

This document establishes requirements, test procedures, assessment methods and acceptance criteria for operating rolling stock in open track. For pressure variations and slipstream effects beside the track, requirements and assessment methods are provided. For running resistance, assessment methods are addressed in this document. Load cases on infrastructure components due to train-induced pressure variations and slipstream effects are addressed in this document. For ballasted track test set-ups for ballast projection assessment are proposed.
The requirements only apply to rolling stock of the heavy rail system with maximum train speeds above 160 km/h and not to other rail systems. The document is applicable to all rolling stock and infrastructure in open air with nominal track gauges of 1 435 mm to 1 668 mm inclusive.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16571:2024(Main)
Systems for evacuation of plume generated by medical devices (ISO 16571:2024)
EN ISO 16571:2024

Full revision of currently published 2014 version.  Additionally, expand scope to include plume evacuation systems for endoscopic procedures (e.g. minimally invasive, laparoscopic).
The scope is now the following:
This Standard specifies requirements and guidelines for the design, manufacture, installation, function, performance, maintenance, servicing, documentation, testing, and commissioning of equipment for evacuation of plume generated by medical devices. It is applicable to:
a) portable and mobile plume evacuation systems,
b) local stationary plume evacuation systems,
c) dedicated central pipeline systems for plume evacuation systems, and
d) plume evacuation systems integrated into other equipment (e.g. laser equipment).

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day