SIST EN 13832-2:2006
(Main)Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
This standard specifies requirements for footwear to protect the user against specific chemicals.
This standard does not apply to footwear with leather outsoles.
NOTE Requirements for slip resistance are not given in the current (2004) editions of EN ISO 20345, EN ISO 20346 or EN ISO 20347. CEN/TC 161 Working Group 3 is continuing its work to develop slip requirements and it is expected that EN 13832-2 will be amended as soon as this work is finished.
Schuhe zum Schutz gegen Chemikalien - Teil 2: Anforderungen an Schuhe, die gegen Chemikalien unter Laborbedingungen widerstandsfähig sind
Diese Norm legt Anforderungen fest für Schuhe zum Schutz gegen spezifische Chemikalien.
Diese Norm gilt nicht für Schuhe mit Leder-Laufsohle.
ANMERKUNG Die aktuellen Ausgaben (2004) der EN ISO 20345, EN ISO 20346 und EN ISO 20347 enthalten keine
Anforderungen an die Rutschhemmung. Die Arbeitsgruppe CEN/TC 161/WG 3 entwickelt derzeit Anforderungen an die
Rutschhemmung und prEN 13832-2 wird voraussichtlich geändert, sobald diese Arbeiten beendet sind.
Chaussure protégeant contre les produits chimiques - Partie 2: Exigences pour les chaussures résistant aux produits chimiques dans des conditions de laboratoire
La présente Norme européenne spécifie les exigences relatives aux chaussures destinées a protéger l'utilisateur contre des produits chimiques spécifiques.
La présente norme européenne ne s’applique pas a des chaussures comportant des semelles de marche en cuir.
NOTE Les exigences de résistance au glissement ne sont pas fournies dans les éditions actuelles (2004) des normes EN ISO 20345, EN ISO 20346 ou EN ISO 20347. Le groupe de travail 3 CEN/TC 161 continue a élaborer les exigences concernant le glissement et l’EN 13832-2 sera normalement amendée des la fin de ce travail.
Obutev za varovanje pred kemikalijami - 2. del: Zahteve za obutev, odporno proti kemikalijam pri laboratorijskih razmerah
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditionsObutev za varovanje pred kemikalijami - 2. del: Zahteve za obutev, odporno proti kemikalijam pri laboratorijskih razmerahChaussure protégeant contre les produits chimiques - Partie 2: Exigences pour les chaussures résistant aux produits chimiques dans des conditions de laboratoireSchuhe zum Schutz gegen Chemikalien - Teil 2: Anforderungen an Schuhe, die gegen Chemikalien unter Laborbedingungen widerstandsfähig sindTa slovenski standard je istoveten z:EN 13832-2:2006SIST EN 13832-2:2006en13.340.50Protective footwearICS:SLOVENSKI
STANDARDSIST EN 13832-2:200601-december-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13832-2August 2006ICS 13.340.50 English VersionFootwear protecting against chemicals - Part 2: Requirementsfor footwear resistant to chemicals under laboratory conditionsChaussure protégeant contre les produits chimiques -Partie 2: Exigences pour les chaussures résistant auxproduits chimiques dans des conditions de laboratoireSchuhe zum Schutz gegen Chemikalien - Teil 2:Anforderungen an Schuhe, die gegen Chemikalien unterLaborbedingungen widerstandsfähig sindThis European Standard was approved by CEN on 1 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13832-2:2006: E
EN 13832-2:2006 (E) 2 Contents Page FOREWORD.3 1 SCOPE.4 2 NORMATIVE REFERENCES.4 3 TERMS AND DEFINITIONS.4 4 DESIGN.4 5 CLASSIFICATION.5 6 REQUIREMENTS.6 6.1 BASIC REQUIREMENTS.6 6.2 RESISTANCE OF WHOLE FOOTWEAR TO CHEMICALS.9 6.2.1 Chemicals.9 6.2.2 Degradation resistance.9 6.3 OUTSOLE.10 7 ADDITIONAL REQUIREMENTS FOR FOOTWEAR PROTECTING AGAINST CHEMICALS.11 8 MARKING.11 9 INFORMATION TO BE SUPPLIED BY THE MANUFACTURER.12 9.1 GENERAL.12 9.2 INSTRUCTIONS FOR USE AND RELATED INFORMATION.13 9.3 ELECTRICAL PROPERTIES.13 9.4 PROPERTIES OF PROTECTION AGAINST CHEMICALS.13 9.5 INSOCKS.14 ANNEX ZA (INFORMATIVE)
RELATIONSHIP BETWEEN THIS EUROPEAN STANDARD AND THE ESSENTIAL REQUIREMENTS OF EU DIRECTIVE 89/686/EEC PERSONAL PROTECTIVE EQUIPMENT.15 BIBLIOGRAPHY.16
EN 13832-2:2006 (E) 3
Foreword This document (EN 13832-2:2006) has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by February 2007. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 13832, Footwear protecting against chemicals, is published in three parts Part 1 : Terminology and test methods Part 2 : Requirements for footwear resistant to chemicals under laboratory conditions Part 3 : Requirements for footwear highly resistant to chemicals under laboratory conditions This standard is intended for use in conjunction with EN ISO 20345, EN ISO 20346 and EN ISO 20347. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 13832-2:2006 (E) 4 1 Scope This standard specifies requirements for footwear to protect the user against specific chemicals.
This standard does not apply to footwear with leather outsoles. NOTE Requirements for slip resistance are not given in the current (2004) editions of EN ISO 20345, EN ISO 20346 or EN ISO 20347. CEN/TC 161 Working Group 3 is continuing its work to develop slip requirements and it is expected that EN 13832-2 will be amended as soon as this work is finished. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13832-1:2006, Footwear protecting against chemicals - Part 1: Terminology and test methods EN ISO 868, Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) EN ISO 20344: 2004, Personal protective equipment - Test methods for footwear (ISO 20344:2004) EN ISO 20345: 2004, Personal protective equipment - Safety footwear (ISO 20345:2004) EN ISO 20346: 2004, Personal protective equipment - Protective footwear (ISO 20346:2004) EN ISO 20347: 2004, Personal protective equipment - Occupational footwear (ISO 20347:2004) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13832-1: 2006 and EN ISO 20345:2004 apply. 4 Design For footwear protecting against chemicals, only designs B, C, D or E in Figure 1 shall be used.
EN 13832-2:2006 (E) 5
1
ABCDE Key
1 variable extension that can be adapted to the wearer A low shoe C half-knee boot E thigh boot B ankle boot D knee-height boot
NOTE Design E is a knee-height boot (design D) equipped with a thin impermeable material that extends the upper and that can be cut to adapt the boot to the wearer. Figure 1 — Designs of footwear
5 Classification Footwear shall be classified in accordance with Table 1. Table 1 — Classification of footwear Code designation Classification I Footwear made from leather and other materials, excluding all-rubber and all-polymeric footwear II All-rubber (i.e. entirely vulcanized) and all-polymeric footwear (i.e. entirely moulded) footwear
EN 13832-2:2006 (E) 6 6 Requirements
6.1 Basic requirements
Footwear protecting against chemicals shall conform to the requirements specified in Table 2. Footwear protecting against chemicals may or may not include a toe cap. The choice shall be made from one of the three columns (EN ISO 20345, EN ISO 20346 or EN ISO 20347) in Table 2.
EN 13832-2:2006 (E) 7
Table 2 — Basic requirements for footwear protecting against chemicals Reference Classification Requirements EN ISO 20345: 2004 EN ISO 20346: 2004 EN ISO 20347: 2004 EN 13832-2: 2006 I II Types and classifications
4 and 5 X X Height of upper 5.2.1 5.2.1 5.2.1
X X Specific ergonomic features 5.3.4 5.3.4 5.3.3
X X Leakproofness 5.3.3 5.3.3 5.3.2
X Whole footwear Water resistance 6.2.5 6.2.5 6.2.5
X
Designs B, C and D (Figure 1) 5.2.2 5.2.2 5.2.2
X X General Seat region Design E (Figure 1) 5.2.2 5.2.2 5.2.2
X Construction 5.3.1.1 5.3.1.1 5.3.1.1
X
Upper/outsole bond strength 5.3.1.2 5.3.1.2 5.3.1.2
X
Sole performance Slip resistance
scope
X X General
5.3.2.1 5.3.2.1
X X Toe cap length
5.3.2.2 5.3.2.2
X X Impact resistance
5.3.2.3 5.3.2.3
X X Compression resistance 5.3.2.4 5.3.2.4
X X Corrosion resistance of metal toe caps
5.3.2.5 5.3.2.5
X X Toe Protection Non- metallic toe caps 5.3.2.6 5.3.2.6
Whole footwear Resistance of whole footwear to chemicals
6.2 X X General 5.4.1 5.4.1 5.4.1
X X Thickness 5.4.2 5.4.2 5.4.2
X Tear strength 5.4.3 5.4.3 5.4.3
X
Tensile properties 5.4.4 5.4.4 5.4.4
X X Flexing resistance 5.4.5 5.4.5 5.4.5
X pH value 5.4.7 5.4.7 5.4.7
X
Chromium VI 5.4.9 5.4.9 5.4.9
X
Water penetration and waterabsorption 6.3.1 6.3.1 6.3.1
X
Upper Upper construction 6.3.2 6.3.2 6.3.2
X
Tear strength 5.5.1 5.5.1 5.5.1
O
Abrasion resistance 5.5.2 5.5.2 5.5.2
O
pH value 5.5.4 5.5.4 5.5.4
O
Vamp lining Chromium VI 5.5.5 5.5.5 5.5.5
O
Tear strength 5.5.1 5.5.1 5.5.1
O
Abrasion resistance 5.5.2 5.5.2 5.5.2
O
pH value 5.5.4 5.5.4 5.5.4
O
Quarter lining Chromium VI 5.5.5 5.5.5 5.5.5
O
Tear strength 5.6.1 5.6.1 5.6.1
O
pH value 5.6.2 5.6.2 5.6.2
O
Tongue Chromium VI 5.6.3 5.6.3 5.6.3
O
Insole/insocks See Table 3
EN 13832-2:2006 (E) 8 Table 2 — Basic requirements for footwear protecting against chemicals (cont.) Reference Classification Requirements EN ISO 20345: 2004 EN ISO 20346: 2004 EN ISO 20347: 2004 EN 13832-2: 2006 I II Thickness 5.8.1 5.8.1 5.8.1
X X Tear strength 5.8.2 5.8.2 5.8.2
X
Abrasion resistance
6.3 X X Flexing resistance 5.8.4 5.8.4 5.8.4
X X Outsole Interlayer bond strength 5.8.6 5.8.6 5.8.6
O O The applicability of a requirement to a particular classification is indicated in the table by the following. X
indicates that the requirement shall be met. In some cases the requirement relates only to particular materials within the classification, e.g. pH value of leather components. This does not mean that other materials are precluded from use. O
indicates that if the component part exists, the requir
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.