SIST EN ISO 17575-2:2016

Electronic fee collection - Application interface definition for autonomous systems - Part 2: Communication and connection to the lower layers (ISO 17575-2:2016)

This part of ISO 17575 defines how to convey all or parts of the data element structure defined in other parts of ISO 17575 over any communication stack and media suitable for this application. It is applicable monly to mobile communication links (although wired links, i.e. back office connections, can use the same methodology).
To establish a link to a sequence of service calls initializing the communication channel, addressing the reception of the message and forwarding the payload are required. The definition provided in this part of ISO 17575 includes the required communication medium independent services, represented by an abstract application programming interface (API).
The communication interface is implemented as an API in the programming environment of choice for the Front End (FE) system. The specification of the Back End (BE) API is outside the scope of this part of ISO 17575.
The definition of this API in concrete terms is outside of the scope of this part of ISO 17575. This part of ISO 17575 specifies an abstract API that defines the semantics of the concrete API as illustrated in Figure 3 and its protocol implementation conformance statement (PICS) proforma (see Annex B). An example of a concrete API is presented in Annex C. Where no distinction is made between the abstract and concrete communications APIs, the term “communications API” or just “API” can be used.

Elektronische Gebührenerhebung - Definition der Anwendungsschnittstelle für autonome Systeme - Teil 2: Kommunikation und Verbindung mit den unteren Schichten (ISO 17575-2:2016)

Perception du télépéage - Définition de l'interface d'application pour les systèmes autonomes - Partie 2: Communications et connexions aux couches plus basses (ISO 17575-2:2016)

ISO 17575-2:2016 définit comment transposer tout ou partie de la structure des éléments de données définis dans les autres parties de l'ISO 17575 via une pile de communication et des supports adaptés à cette application. Elle s'applique uniquement aux liaisons de communication mobile (bien que les liaisons filaires, comme celles de back-office, puissent utiliser la même méthode).
Pour établir une liaison avec une séquence d'appels de service initialisant le canal de communication, la réception du message et le réacheminement de la charge doivent être gérés. La définition fournie dans la présente partie de l'ISO 17575 englobe les services indépendants du support de communication; ils sont représentés par une interface de programmation d'application (API).
L'interface de communication est implémentée dans l'environnement de programmation choisi pour le système frontal (FE, Front End) sous la forme d'une API. La spécification de l'API du système central (BE, Back End) n'entre pas dans le cadre de la présente partie de l'ISO 17575.
La définition de cette API en termes concrets n'entre pas dans le cadre de la présente partie de l'ISO 17575. La présente partie de l'ISO 17575 spécifie une API abstraite qui définit la sémantique de l'API concrète comme illustré à la Figure 3 et son formulaire de déclaration de conformité d'implémentation de protocole (PICS, Protocol Implementation Conformance Statement) comme décrit à l'Annexe B. L'Annexe C fournit un exemple d'API concrète. Aucune distinction n'étant faite entre les API de communication abstraites et concrètes, les termes « API de communication » ou simplement « API » peuvent s'utiliser indifféremment.
ISO 17575-2:2016 fournit également une spécification détaillée de la structure des déclarations API associées, un exemple de la manière de l'implémenter, ainsi que son rôle dans un groupe de péage complexe tel que le SET (voir Annexe A à Annexe E).
Les règles de sélection des supports et les mécanismes de chiffrement et de gestion des certificats n'entrent pas dans le cadre de la présente partie de l'ISO 17575.

Elektronsko pobiranje pristojbin - Definicija aplikacijskega vmesnika za avtonomne sisteme - 2. del: Komunikacija in povezovanje z nižjimi plastmi (ISO 17575-2:2016)

Ta del standarda ISO 17575 določa, kako prenesti celotno strukturo podatkovnega elementa, določenega v drugih delih standarda ISO 17575, (ali dele te strukture) prek katerega koli komunikacijskega odvodnika in medija, primernega za to vrsto uporabe. Uporablja se predvsem za mobilne komunikacijske povezave (čeprav lahko žične povezave, npr. zaledne povezave, uporabljajo enako metodologijo).
Za vzpostavitev povezave do sekvence storitvenih klicev, ki inicializirajo komunikacijski kanal, sta potrebna obravnava sprejema sporočila in posredovanje koristne vsebine. Definicija v tem delu standarda ISO 17575 vključuje zahtevane neodvisne storitve komunikacijskega medija, ki jih predstavlja abstraktni programski vmesnik (API).
Komunikacijski vmesnik je implementiran kot programski vmesnik v izbranem programskem okolju za čelni (FE) sistem. Specifikacija zalednega (BE) programskega vmesnika ne spada v področje uporabe tega dela standarda ISO 17575.
Natančnejša definicija tega programskega vmesnika ne spada v področje uporabe tega dela standarda ISO 17575. Ta del standarda ISO 17575 določa abstraktni programski vmesnik, ki opredeljuje semantiko dejanskega programskega vmesnika, kot prikazuje slika 3, in njegovo proformo formalne izjave o skladnosti izvedbe protokola (PICS) (glej dodatek B). Primer dejanskega programskega vmesnika je predstavljen v dodatku C. Kadar se ne razlikuje med abstraktnim in dejanskim komunikacijskim programskim vmesnikom, se lahko uporablja izraz »komunikacijski programski vmesnik« ali samo »programski vmesnik«.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 30-Mar-2014
• Publication Date: 18-May-2016
• Withdrawal Date: 19-Dec-2023
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: ITC - Information technology
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 19-Dec-2023
• Due Date: 11-Jan-2024
• Completion Date: 20-Dec-2023
• Directive: 2004/52/EC - Interoperability of electronic road toll systems in the Community
• Mandate: M/338 - Standardisation mandate to CEN, CENELEC and ETSI in support of interoperabilty of electonic road toll systems in the community
• Ref Project: EN ISO 17575-2:2016 - Electronic fee collection - Application interface definition for autonomous systems - Part 2: Communication and connection to the lower layers (ISO 17575-2:2016)

Relations

• Replaces: SIST-TS CEN ISO/TS 17575-2:2010 - Electronic fee collection - Application interface definition for autonomous systems - Part 2: Communication and connection to the lower layers (ISO/TS 17575-2:2010)
• Effective Date: 01-Jul-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17575-2:2016
01-julij-2016
1DGRPHãþD
SIST-TS CEN ISO/TS 17575-2:2010
Elektronsko pobiranje pristojbin - Definicija aplikacijskega vmesnika za
avtonomne sisteme - 2. del: Komunikacija in povezovanje z nižjimi plastmi (ISO
17575-2:2016)
Electronic fee collection - Application interface definition for autonomous systems - Part
2: Communication and connection to the lower layers (ISO 17575-2:2016)
Elektronische Gebührenerhebung - Definition der Anwendungsschnittstelle für autonome
Systeme - Teil 2: Kommunikation und Verbindung mit den unteren Schichten (ISO 17575
-2:2016)
Perception du télépéage - Définition de l'interface d'application pour les systèmes
autonomes - Partie 2: Communications et connexions aux couches plus basses (ISO
17575-2:2016)
Ta slovenski standard je istoveten z: EN ISO 17575-2:2016
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST EN ISO 17575-2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17575-2:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 17575-2:2016


EN ISO 17575-2
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2016
EUROPÄISCHE NORM
ICS 35.240.60; 03.220.20 Supersedes CEN ISO/TS 17575-2:2010
English Version

Electronic fee collection - Application interface definition
for autonomous systems - Part 2: Communication and
connection to the lower layers (ISO 17575-2:2016)
Perception du télépéage - Définition de l'interface Elektronische Gebührenerhebung - Definition der
d'application pour les systèmes autonomes - Partie 2: Anwendungsschnittstelle für autonome Systeme - Teil
Communications et connexions aux couches basses 2: Kommunikation und Verbindung mit den unteren
(ISO 17575-2:2016) Schichten (ISO 17575-2:2016)
This European Standard was approved by CEN on 11 December 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17575-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17575-2:2016
EN ISO 17575-2:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 17575-2:2016
EN ISO 17575-2:2016 (E)
European foreword
This document (EN ISO 17575-2:2016) has been prepared by Technical Committee ISO/TC 204
“Intelligent transport systems” in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall
be withdrawn at the latest by August 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes CEN ISO/TS 17575-2:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech
...

SLOVENSKI STANDARD
oSIST prEN ISO 17575-2:2014
01-marec-2014
Elektronsko pobiranje pristojbin - Definicija aplikacijskega vmesnika za
avtonomne sisteme - 2. del: Komunikacija in povezovanje z nižjimi plastmi
(ISO/DIS 17575-2:2013)
Electronic fee collection - Application interface definition for autonomous systems - Part
2: Communication and connection to the lower layers (ISO/DIS 17575-2:2013)
Elektronische Gebührenerhebung - Definition der Anwendungsschnittstelle für autonome
Systeme - Teil 2: Kommunikation und Verbindung mit den unteren Schichten (ISO/DIS
17575-2:2013)
Perception du télépéage - Définition de l'interface d'application pour les systèmes
autonomes - Partie 2: Communications et connexions aux couches plus basses
(ISO/DIS 17575-2:2013)
Ta slovenski standard je istoveten z: prEN ISO 17575-2
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
oSIST prEN ISO 17575-2:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17575-2:2014

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17575-2:2014
DRAFT INTERNATIONAL STANDARD
ISO/DIS 17575-2
ISO/TC 204 Secretariat: ANSI
Voting begins on: Voting terminates on:
2013-12-12 2014-05-12
Electronic fee collection — Application interface definition
for autonomous systems —
Part 2:
Communication and connection to the lower layers
Perception du télépéage — Définition de l’interface d’application pour les systèmes autonomes —
Partie 2: Communications et connexions aux couches plus basses
[Revision of first edition (ISO/TS 17575-2:2010 )]
ICS: 35.240.60;03.220.20
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 17575-2:2013(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2013

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17575-2:2014
ISO/DIS 17575-2:2013(E)

Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as
permitted under the applicable laws of the user’s country, neither this ISO draft nor any extract
from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means,
electronic, photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
ii © ISO 2013 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17575-2:2014
ISO/DIS 17575-2
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...