SIST EN 13523-26:2014
(Main)Coil coated metals - Test methods - Part 26: Resistance to condensation of water
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
EN 13523-26 specifies a procedure for evaluating the resistance to continuous condensation of an organic coating on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.
Bandbeschichtete Metalle - Prüfverfahren - Teil 26: Beständigkeit gegen Kondenswasser
Dieser Teil von EN 13523 legt ein Verfahren zum Bewerten der Beständigkeit einer organischen Beschichtung auf einem metallischen Substrat gegen kontinuierliche Kondensation durch Beanspruchung in einer Feuchtekammer unter kontrollierten Bedingungen fest.
Tôles prélaquées - Méthodes d'essai - Partie 26: Résistance à la condensation d'eau
La présente partie de l'EN 13523 spécifie une méthode permettant d'évaluer la résistance à la condensation continue d'un revêtement organique déposé sur un subjectile métallique, via l’exposition dans une enceinte à atmosphère humide dans des conditions contrôlées.
Prevlečene kovine, ki se navijajo - Preskusne metode - 26. del: Odpornost proti kondenzaciji vode
Standard EN 13523-26 določa postopek za ocenjevanje odpornosti proti nenehni kondenzaciji vode na organski prevleki na kovinski podlagi pri izpostavljenosti vlažnosti pod nadzorovanimi pogoji.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 26: Beständigkeit gegen KondenswasserTôles prélaquées - Méthodes d'essai - Partie 26: Résistance à la condensation d'eauCoil coated metals - Test methods - Part 26: Resistance to condensation of water25.220.60Organske prevlekeOrganic coatings17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN 13523-26:2014SIST EN 13523-26:2014en,fr,de01-september-2014SIST EN 13523-26:2014SLOVENSKI
STANDARDSIST EN 13523-26:20061DGRPHãþD
SIST EN 13523-26:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-26
June 2014 ICS 25.220.60 Supersedes EN 13523-26:2006English Version
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
Tôles prélaquées - Méthodes d'essai - Partie 26: Résistance à la condensation de l'eau
Bandbeschichtete Metalle - Prüfverfahren - Teil 26: Beständigkeit gegen Kondenswasser This European Standard was approved by CEN on 7 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-26:2014 ESIST EN 13523-26:2014
EN 13523-26:2014 (E) 2 Contents Page
Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle . 5 5 Apparatus . 5 5.1 Cabinet . 5 6 Sampling . 6 7 Test panels . 6 8 Procedure . 6 8.1 Exposure . 6 8.2 Evaluation . 7 9 Expression of results . 7 10 Precision . 7 11 Test report . 7 Bibliography . 8
SIST EN 13523-26:2014
EN 13523-26:2014 (E) 3 Foreword This document (EN 13523-26:2014) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and conflicting national standards shall be withdrawn at the latest by December 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13523-26:2006. The main technical changes are: a) the description of the water cabinet was amended and a figure showing an example of a water cabinet was introduced; b) exposure times for the test panels are amended. EN 13523, Coil coated metals — Test methods, consists of the following parts: — Part 0: General introduction — Part 1: Film thickness — Part 2: Gloss — Part 3: Colour difference — Instrumental comparison — Part 4: Pencil hardness — Part 5: Resistance to rapid deformation (impact te
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bandbeschichtete Metalle - Prüfverfahren - Teil 26: Beständigkeit gegen KondenswasserTôles prélaquées - Méthodes d'essai - Partie 26: Résistance à la condensation d'eauCoil coated metals - Test methods - Part 26: Resistance to condensation of water25.220.60Organske prevlekeOrganic coatings17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:FprEN 13523-26kSIST FprEN 13523-26:2014en,fr,de01-marec-2014kSIST FprEN 13523-26:2014SLOVENSKI
STANDARD
kSIST FprEN 13523-26:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 13523-26
February 2014 ICS 25.220.60 Will supersede EN 13523-26:2006English Version
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
Tôles prélaquées - Méthodes d'essai - Partie 26: Résistance à la condensation de l'eau
Bandbeschichtete Metalle - Prüfverfahren - Teil 26: Beständigkeit gegen Kondenswasser This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC 139.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 13523-26:2014 EkSIST FprEN 13523-26:2014
FprEN 13523-26:2014 (E) 2 Contents Page
Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle . 5 5 Apparatus . 5 5.1 Cabinet . 5 6 Sampling . 6 7 Test panels . 6 8 Procedure . 6 8.1 Exposure . 6 8.2 Evaluation . 7 9 Expression of results . 7 10 Precision . 7 11 Test report . 7 Bibliography . 8
kSIST FprEN 13523-26:2014
FprEN 13523-26:2014 (E) 3 Foreword This document (FprEN 13523-26:2014) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This document is currently submitted to the Formal Vote. This document will supersede EN 13523-26:2006. The main technical changes are: a) the description of the water cabinet was amended and a figure showing an example of a water cabinet was introduced; b) exposure times for the test panels are amended. EN 13523, Coil coated metals — Test methods, consists of the following
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.