SIST EN 13523-26:2006
(Main)Coil coated metals - Test methods - Part 26: Resistance to condensation of water
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
This Part of EN 13523 specifies a procedure for evaluating the condensation resistance of an organic coating (coil coating) on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.
Bandbeschichtete Metalle - Prüfverfahren -Teil 26: Beständigkeit gegen Kondenswasser
Dieser Teil von EN 13523 legt ein das Verfahren zum Bewerten der Beständigkeit einer organischen
(Band-)Beschichtung auf einem metallischen Substrat gegen Kondenswasser durch Beanspruchung in einer
Feuchtekammer unter festgelegten Bedingungen fest.
Tôles prélaquées - Méthodes d'essai - Partie 26: Résistance a la condensation de l'eau
La présente partie de l'EN 13523 spécifie une méthode permettant d'évaluer la résistance a la condensation
d'un revetement organique (prélaqué) déposé sur un subjectile métallique, par des moyens d’exposition dans
une enceinte a atmosphere humide sous des conditions contrôlées.
Kovine, prevlečene v svitkih – Preskusne metode preskušanja – 26. del: Odpornost proti kondenzaciji vode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Coil coated metals - Test methods - Part 26: Resistance to condensation of waterTôles prélaquées - Méthodes d'essai - Partie 26: Résistance a la condensation de l'eauBandbeschichtete Metalle - Prüfverfahren -Teil 26: Beständigkeit gegen KondenswasserTa slovenski standard je istoveten z:EN 13523-26:2006SIST EN 13523-26:2006en25.220.60Organske prevlekeOrganic coatingsICS:SLOVENSKI
STANDARDSIST EN 13523-26:200601-oktober-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13523-26May 2006ICS 25.220.60 English VersionCoil coated metals - Test methods - Part 26: Resistance tocondensation of waterTôles prélaquées - Méthodes d'essai - Partie 26:Résistance à la condensation de l'eauBandbeschichtete Metalle - Prüfverfahren -Teil 26:Beständigkeit gegen KondenswasserThis European Standard was approved by CEN on 27 April 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13523-26:2006: E
EN 13523-26:2006 (E) 2 Foreword This document (EN 13523-26:2006) has been prepared by Technical Committee CEN/TC 139 “Paints and varnishes”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. This European Standard EN 13523, Coil coated metals — Test methods consists of the following parts: Part 0: General introduction and list of test methods; Part 1: Coating thickness; Part 2: Specular gloss; Part 3: Colour difference — Instrumental comparison; Part 4: Pencil hardness; Part 5: Resistance to rapid deformation (impact test); Part 6: Adhesion after indentation (cupping test); Part 7: Resistance to cracking on bending (T-bend test); Part 8: Resistance to salt spray (fog); Part 9: Resistance to water immersion; Part 10: Resistance to fluorescent UV light and water condensation; Part 11: Resistance to solvents (rubbing test; Part 12: Resistance to scratching; Part 13: Resistance to accelerated ageing by the use of heat; Part 14: Chalking (Helmen method); Part 15: Metamerism; Part 16: Resistance to abrasion; Part 17: Adhesion of strippable films; Part 18: Resistance to staining; Part 19: Panel design and method of atmospheric exposure testing; Part 20: Foam adhesion; Part 21: Evaluation of outdoor exposed panels;
EN 13523-26:2006 (E) 3 Part 22: Colour difference — Visual comparison; Part 23: Colour stability in humid atmospheres containing sulfur dioxide; Part 24: Resistance to blocking and pressure marking; Part 25: Resistance to humidity; Part 26: Resistance to condensation of water. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 13523-26:2006 (E) 4 1 Scope This Part of EN 13523 specifies a procedure for evaluating the condensation resistance of an organic coating (coil coating) on a metallic substrate, by means
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.