SIST EN 150001:2002
(Main)Blank Detail Specification: General purpose semiconductor diodes
Blank Detail Specification: General purpose semiconductor diodes
D114/033: Withdrawn
Vordruck für Bauartspezifikation: Allzweck-Halbleiterdioden
Spécification particulière cadre: Diodes à semiconducteur d'usage général
Blank detail specification: General purpose semiconductor diodes
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Blank detail specification: General purpose semiconductor diodesVordruck für Bauartspezifikation: Allzweck-HalbleiterdiodenSpécification particulière cadre: Diodes à semiconducteur d'usage généralBlank Detail Specification: General purpose semiconductor diodes31.080.10DiodeDio
...
This May Also Interest You
This part of IEC 61643 specifies standard test circuits and methods for thyristor surge
suppressor (TSS) components. These surge protective components, SPCs, are specially
formulated thyristors designed to limit overvoltages and divert surge currents by clamping and
switching actions. These SPCs are used in the construction of surge protective devices
(SPDs) and equipment used in Information & Communications Technologies (ICT) networks
with voltages up to AC 1 000 V and DC 1 500 V. This document is applicable to gated or nongated
TSS components with third quadrant (-v and –i) characteristics of blocking, conducting
or switching.
This document contains information on
• terminology;
• letter symbols;
• essential ratings and characteristics;
• rating verification and characteristic measurement;
This document does not apply to the conventional three-terminal thyristors as covered by
IEC 60747-6.
- Standard79 pagesEnglish languagesale 10% offe-Library read for×1 day
- 02-Sep-2020
- 29.120.50
- 31.080.10
- 2014/30/EU
- POD
Is applicable to avalanche breakdown diodes (ABDs) which represent one type of surge protective device component (hereinafter referred to as SPDC) used in the design and construction of surge protective devices connected to low-voltage power distribution systems, transmission, and signalling networks. Test specifications in this standard are for single ABDs consisting of two terminals. However, multiple ABDs may be assembled within a single package defined as a diode array. Each diode within the array can be tested to this specification. This standard contains a series of test criteria for determining the electrical characteristics of the ABD. From the standard test methods described herein, the performance characteristics and ratings of the ABD can be verified or established for specific packaged designs.
- Standard19 pagesEnglish languagesale 10% offe-Library read for×1 day
This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
NOTE This document applies to any curtain walling product as defined in EN 13830.
- Standard14 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft12 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard3 pagesEnglish and French languagesale 15% off
- Amendment3 pagesEnglish languagesale 10% offe-Library read for×1 day
- Corrigendum4 pagesEnglish languagesale 10% offe-Library read for×1 day
This document gives general guidelines for organizations seeking to address water-related environmental aspects, environmental impacts, environmental conditions, and the associated risks and opportunities within an environmental management system in accordance with ISO 14001.
The document addresses issues for environmental management related to water quantity and quality, such as water withdrawal, efficient use of water, and water discharge, as well as approaches to cope with water-related events such as flooding and droughts. The document considers the interconnections of water with other environmental media and takes a holistic approach to the management of water due to its impacts on ecosystems, ecosystem services, related biodiversity, as well as human life and well-being.
This document is applicable to organizations irrespective of their size, type, financial resources, location and sector. It is applicable to all types of water and considers a life cycle perspective.
- Standard45 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for×1 day
IEC 60050-811:2017 gives the general terminology relating to electric traction used in electrical equipment and systems for railways, as well as general terms pertaining to specific applications and associated technologies. This new edition reviews and complements the previous one. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.
- Standard626 pagesEnglish and French languagesale 10% offe-Library read for×1 day
- Standard612 pagesEnglish and French languagesale 15% off
- Corrigendum4 pagesEnglish languagesale 10% offe-Library read for×1 day
DEN/DECT-00359-2
- Standard76 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard76 pagesEnglish languagesale 15% off
- Standard76 pagesEnglish languagesale 15% off
- Draft76 pagesEnglish languagesale 10% offe-Library read for×1 day
This document gives guidance and requirements for the assessment of conformity of compounds, products, joints and assemblies in accordance with the applicable part(s) of the ISO 16486 series which are intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
NOTE 1 A basic test matrix in Annex B provides an overview of the testing scheme.
It is recommended for the manufacturer to have a management system such as ISO 9001[4] or equivalent.
NOTE 2 If certification is involved, certification bodies and inspection bodies operating according to ISO/IEC 17065 and ISO/IEC 17020 are considered to be competent.
In conjunction with the other parts of the ISO 16486 series (see Clause 2), this document is applicable to unplasticized polyamide (PA-U) piping systems intended to be buried and used for the supply of gaseous fuels. It is applicable to PA-U pipes, fittings and valves, as well as to their joints and to joints with components of other materials intended to be used under the following conditions:
a) a maximum operating pressure (MOP) up to and including 18 bar[1] (the MOP is limited to 16 bar for CEN member countries, where ISO 16486-6 is replaced by CEN/TS 12007-6[1]);
b) an operating temperature of 20 °C as the reference temperature.
NOTE 3 For operating temperatures different to 20 °C, derating coefficients can be used (see ISO 16486-6). CEN member countries use CEN/TS 12007-6[1] and ISO/TS 16486-7 (this document) as a basis, but they can also request additional requirements. For non-CEN member countries, information for dealing with special cases for PA-U can be found in ISO/TS 16486-7 (this document) and PPI TR-3.[7]
For mechanical fittings conforming to ISO 17885, guidance for assessment of conformity is not given in this document. When requested, a quality plan based on the tests mentioned can be set up in agreement between user and manufacturer.
The ISO 16486 series covers a range of maximum operating pressures and gives requirements concerning colours.
NOTE 4 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
[1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.
- Technical specification42 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft39 pagesEnglish languagesale 10% offe-Library read for×1 day
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.