SIST-TP CLC/TR 62453-41:2010
(Main)Field device tool interface specification -- Part 41: Object model integration profile - Common object model
Field device tool interface specification -- Part 41: Object model integration profile - Common object model
This part of IEC 62453, which is a Technical report, defines how the common FDT principles are implemented based on the MS COM technology, including the object behavior and object interaction via COM interfaces. This part specifies the technology specific implementation of the protocol specific functionality and communication services. This part of IEC 62453 is informative, however when this part is applied its requirements shall be implemented as specified. This part specifies FDT version 1.2.1.
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 41: Profil zur Integration des Objektmodells - Allgemeines Objektmodell (COM)
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 41: Profil d'intégration des modèles objet - Modèle objet commun
Specifikacija vmesnika orodja procesne naprave - 41. del: Integracija profila modela objekta - Skupni model objekta (IEC/TR 62453-41:2009)
Ta del IEC 62453, ki je tehnično poročilo, opredeljuje, kako so skupna FDT načela izvedena na osnovi tehnologije MS COM, vključno z odzivom objekta in njegovo interakcijo preko vmesnikov COM. Ta del opredeljuje tehnologiji določeno implementacijo za protokol značilne funkcionalnosti in komunikacijskih storitev. Ta del IEC 62453 je informativen, vendar kadar se uporablja, morajo biti njegove zahteve izvedene kot opredeljeno. Ta del opredeljuje FDT verzijo 1.2.1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CLC/TR 62453-41:2010
01-februar-2010
Specifikacija vmesnika orodja procesne naprave - 41. del: Integracija profila
modela objekta - Skupni model objekta (IEC/TR 62453-41:2009)
Field device tool interface specification -- Part 41: Object model integration profile -
Common object model
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 41: Profil zur Integration des
Objektmodells - Allgemeines Objektmodell (COM)
Ta slovenski standard je istoveten z: CLC/TR 62453-41:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST-TP CLC/TR 62453-41:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CLC/TR 62453-41:2010
---------------------- Page: 2 ----------------------
SIST-TP CLC/TR 62453-41:2010
TECHNICAL REPORT
CLC/TR 62453-41
RAPPORT TECHNIQUE
November 2009
TECHNISCHER BERICHT
ICS 25.040.40; 35.100.05; 35.110
English version
Field device tool (FDT) interface specification -
Part 41: Object model integration profile -
Common object model
(IEC/TR 62453-41:2009)
Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 41: Profil d'intégration Teil 41: Profil zur Integration
des modèles objet - des Objektmodells -
Modèle objet commun Allgemeines Objektmodell (COM)
(CEI/TR 62453-41:2009) (IEC/TR 62453-41:2009)
This Technical Report was approved by CENELEC on 2009-10-01.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: Avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TR 62453-41:2009 E
---------------------- Page: 3 ----------------------
SIST-TP CLC/TR 62453-41:2010
CLC/TR 62453-41:2009 - 2 -
Foreword
The text of document 65E/64/CDV, future edition 1 of IEC/TR 62453-41, prepared by Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as CLC/TR 62453-41
on 2009-10-01.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the Technical Report IEC/TR 62453-41:2009 was approved by CENELEC as a Technical
Report without any modification.
__________
---------------------- Page: 4 ----------------------
SIST-TP CLC/TR 62453-41:2010
- 3 - CLC/TR 62453-41:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61784 series Industrial communication networks - Profiles EN 61784 series
IEC 62453-1 2009 Field device tool (FDT) interface EN 62453-1 2009
specification -
Part 1: Overview and guidance
IEC 62453-2 2009 Field device tool (FDT) interface EN 62453-2 2009
specification -
Part 2: Concepts and detailed description
__________
---------------------- Page: 5 ----------------------
SIST-TP CLC/TR 62453-41:2010
---------------------- Page: 6 ----------------------
SIST-TP CLC/TR 62453-41:2010
IEC/TR 62453-41
®
Edition 1.0 2009-08
TECHNICAL
REPORT
colour
inside
Field device tool (FDT) interface specification –
Part 41: Object model integration profile – Common object model
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XM
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1058-7
® Registered trademark of the International Electrotechnical Commission
---------------------- Page: 7 ----------------------
SIST-TP CLC/TR 62453-41:2010
– 2 – TR 62453-41 © IEC:2009(E)
CONTENTS
FOREWORD.11
INTRODUCTION.13
1 Scope.14
2 Normative references .14
3 Terms, definitions, symbols, abbreviated terms and conventions .14
3.1 Terms and definitions .14
3.2 Abbreviations .15
3.3 Conventions .15
4 Implementation concept.15
4.1 Technological orientation .15
4.2 Implementation of abstract FDT object model.16
4.2.1 General .16
4.2.2 FDT Frame Application (FA) .16
4.2.3 Device Type Manager (DTM) .17
4.2.4 Presentation object.17
4.2.5 FDT-Channel object.17
4.3 Object interaction .18
4.3.1 Parameter interchange via XML.18
4.3.2 Examples of usage .19
4.4 Implementation of DTM data persistence and synchronization.21
4.4.1 Persistence overview.21
4.4.2 Persistence interfaces .22
4.5 DTM state machine .22
5 General concepts .25
5.1 General .25
5.2 Overview of task related FDT interfaces .25
5.3 Return values of interface methods .28
5.4 Dual interfaces .28
5.5 Unicode.28
5.6 Asynchronous versus synchronous behavior .28
5.7 ProgIds .29
5.8 Implementation of DTM, DTM device type and hardware identification
information .29
5.8.1 Device identification .29
5.8.2 Protocol specific transformation style sheet (xsl) .31
5.8.3 Semantic identification information .31
5.8.4 Device assignment .31
5.8.5 Regular expression specification .32
5.9 Implementation of slave redundancy .32
5.9.1 General .32
5.9.2 Topology import/export .32
6 Implementation of FDT services: FDT interfaces.33
6.1 Overview of the FDT interfaces .33
6.2 FDT objects.33
6.2.1 FDT object model .33
6.2.2 Avalability of interface methods .36
---------------------- Page: 8 ----------------------
SIST-TP CLC/TR 62453-41:2010
TR 62453-41 © IEC:2009(E) – 3 –
6.3 Device Type Manager.40
6.3.1 Interface IDtm.40
6.3.2 Interface IDtm2.49
6.3.3 Interface IDtmActiveXInformation .51
6.3.4 Interface IDtmApplication.52
6.3.5 Interface IDtmChannel.54
6.3.6 Interface IDtmDocumentation .55
6.3.7 Interface IDtmDiagnosis .56
6.3.8 Interface IDtmImportExport.58
6.3.9 Interface IDtmInformation .60
6.3.10 Interface IDtmInformation2 .61
6.3.11 Interface IDtmOnlineDiagnosis .62
6.3.12 Interface IDtmOnlineParameter .63
6.3.13 Interface IDtmParameter .66
6.3.14 Interface IFdtCommunicationEvents .67
6.3.15 Interface IFdtCommunicationEvents2 .70
6.3.16 Interface IFdtEvents .71
6.3.17 Interface IDtmHardwareIdentification .74
6.3.18 Interface IDtmSingleDeviceDataAccess .76
6.3.19 Interface IDtmSingleInstanceDataAccess .79
6.4 DTM ActiveXControl .81
6.4.1 Interface IDtmActiveXControl.81
6.4.2 Init.81
6.4.3 PrepareToRelease.82
6.5 FDT Channel.83
6.5.1 Interface IFdtChannel .83
6.5.2 Interface IFdtChannelActiveXInformation.85
6.5.3 Interface IFdtCommunication .88
6.5.4 Interface IFdtChannelSubTopology.95
6.5.5 Interface IFdtChannelSubTopology2.99
6.5.6 Interface IFdtChannelScan .99
6.5.7 Interface IFdtFunctionBlockData.101
6.6 Channel ActiveXControl .103
6.6.1 Interface IFdtChannelActiveXControl .103
6.6.2 Interface IFdtChannelActiveXControl2 .105
6.7 Block Type Manager.106
6.7.1 Interface IBtm.106
6.7.2 Interface IBtmInformation .107
6.7.3 Interface IBtmParameter.107
6.8 BTM ActiveXControl .108
6.8.1 General .108
6.8.2 Interface IBtmActiveXControl.108
6.9 Frame Application .109
6.9.1 Interface IDtmEvents .109
6.9.2 Interface IDtmEvents2 .118
6.9.3 Interface IDtmScanEvents .119
6.9.4 Interface IDtmAuditTrailEvents .121
6.9.5 Interface IFdtActiveX .123
6.9.6 Interface IFdtActiveX2 .124
---------------------- Page: 9 ----------------------
SIST-TP CLC/TR 62453-41:2010
– 4 – TR 62453-41 © IEC:2009(E)
6.9.7 Interface IFdtBulkData.127
6.9.8 Interface IFdtContainer.129
6.9.9 Interface IFdtDialog .132
6.9.10 Interface IFdtTopology.133
6.9.11 Interface IDtmRedundancyEvents.139
6.9.12 Interface IDtmSingleDeviceDataAccessEvents .140
6.9.13 Interface IDtmSingleInstanceDataAccessEvents.143
6.9.14 Interface IFdtBtmTopology.144
7 FDT sequence charts .145
7.1 DTM peer to peer communication .145
7.1.1 General .145
7.1.2 Establish a peer-to-peer connection between DTM and device .145
7.1.3 Asynchronous connect for a peer-to-peer connection . 145
7.1.4 Asynchronous disconnect for a peer-to-peer connection . 146
7.1.5 Asynchronous transaction for a peer-to-peer connection. 146
7.2 Nested communication .147
7.2.1 General .147
7.2.2 Generate system topology .148
7.2.3 Establish a system connection between DTM and device.150
7.2.4 Asynchronous transaction for a system connection.151
7.3 Topology scan.153
7.3.1 Scan network.153
7.3.2 Cancel topology scan .153
7.3.3 Provisional scan result notifications.154
7.3.4 Scan for communication hardware .155
7.3.5 Manufacturer specific device identification.156
7.4 Registration of protocol specific FDT schemas .158
7.5 Configuration of a fieldbus master .160
7.6 Starting and releasing applications.161
7.7 Channel access.162
7.8 DCS Channel assignment.163
7.9 Printing of DTM specific documents.167
7.10 Printing of Frame Application specific documents . 168
7.10.1 General .168
7.10.2 Processing a document .169
7.10.3 Rules for use of DTM specific style sheets . 171
7.11 Propagation of changes.172
7.12 Locking .174
7.12.1 Locking for non-synchronized DTMs .174
7.12.2 Locking for synchronized DTMs .175
7.13 Instantiation and release .177
7.13.1 Instantiation of a new DTM .177
7.13.2 Instantiation of an existing DTM.177
7.13.3 Instantiation of a DTM ActiveX user interface.178
7.13.4 Release of a DTM user interface .179
7.14 Persistent storage of a DTM .179
7.14.1 State machine of instance data.179
7.14.2 Saving instance data of a DTM .181
7.14.3 Reload of a DTM object for another instance .182
---------------------- Page: 10 ----------------------
SIST-TP CLC/TR 62453-41:2010
TR 62453-41 © IEC:2009(E) – 5 –
7.14.4 Copy and versioning of a DTM instance.182
7.15 Audit trail.183
7.16 Comparison of two instance data sets . 185
7.16.1 Comparison without user interface.185
7.16.2 Comparison with user interface .185
7.17 Failsafe data access.186
7.18 Set or modify device address with user interface . 187
7.19 Set or modify known device addresses without user interface. 188
7.20 Display or modify all child device addresses with user interface . 189
7.21 Device initiated data transfer.190
7.22 Starting and releasing DTM user interface in modal dialog .191
7.23 Parent component handling redundant slave .193
7.24 Initialization of a Channel ActiveX control.194
7.24.1 General .194
7.24.2 Supports IFdtChannelActiveXcontrol2.195
7.24.3 Does not support IFdtChannelActiveXControl2 .195
7.25 DTM upgrade .196
7.25.1 General .196
7.25.2 Saving data from a DTM to be upgraded.196
7.25.3 Loading data in the replacement DTM .197
7.26 Usage of IDtmSingleDeviceDataAccess::ReadRequest / Write Request . 198
7.27 Instantiation of DTM and BTM .199
8 Installation issues.201
8.1 Registry and device information .201
8.1.1 Visibility of business objects of a DTM.201
8.1.2 Component categories.201
8.1.3 Registry entries .202
8.1.4 Installation issues.202
8.1.5 Microsoft’s standard component categories manager. 203
8.1.6 Building a Frame Application-database of supported devices. 203
8.1.7 DTM registration.203
8.2 Paths and file information.204
8.2.1 Path information provided by a DTM.204
8.2.2 Paths and persistency .204
8.2.3 Multi-user systems .205
9 Description of data types, parameters and structures .205
9.1 Ids.205
9.2 Data type definitions.205
Annex A (normative) FDT IDL .207
Annex B (normative) Mapping of services to interface methods. 223
Annex C (normative) FDT XML schemas.231
Annex D (informative) FDT XML styles – Documentation .310
Annex E (informative) FDT XSL Transformation.314
Annex F (normative) Channel schema .316
Annex G (normative) FDT version interoperability guide .318
Annex H (informative) Implementation with .Net technology.323
Annex I (informative) Trade names .325
---------------------- Page: 11 ----------------------
SIST-TP CLC/TR 62453-41:2010
– 6 – TR 62453-41 © IEC:2009(E)
Bibliography.326
Figure 1 – Part 41 of the IEC 62453 series .13
Figure 2 − Frame Application interfaces.16
Figure 3 − DTM interfaces .17
Figure 4 − FDT Client/server relationship via XML .18
Figure 5 − Data access and storage.20
Figure 6 − Communication .20
Figure 7 − Documentation.21
Figure 8 − Parameter verification in case of failsafe devices .21
Figure 9 − State machine of a DTM.23
Figure 10 − Device identification.29
Figure 11 − Structural overview .30
Figure 12 − Interfaces of FDT objects – DTM and DtmActiveXControl.34
Figure 13 − Interfaces of FDT object – Frame Application.35
Figure 14 − FDT objects – FDT-Channel.35
Figure 15 − FDT objects – BTM and BtmActiveXControl .36
Figure 16 − Peer to peer connection between DTM and device .145
Figure 17 − Asynchronous connect (peer to peer).146
Figure 18 − Asynchronous disconnect (peer to peer) . 146
Figure 19 − Asynchronous transaction (peer to peer) .147
Figure 20 − System-topology .148
Figure 21 − Generation of system topology by Frame Application .149
Figure 22 – Generation of system topology – Participation of DTM .150
Figure 23 – System connection (across communication hierarchy). 151
Figure 24 − Asynchronous transactions (system connection) . 152
Figure 25 − Scan network topology.153
Figure 26 − Cancel topology scan.154
Figure 27 − Provisional topology scan.155
Figure 28 − Scan for communication hardware .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.