SIST EN 62453-301:2010

Field device tool interface specification -- Part 301: Communication profile integration - IEC 61784 CPF 1

Communication Profile Family 1 (commonly known as FOUNDATION™ Fieldbus1) defines communication profiles based on IEC 61158-2, Type 1, IEC 61158-3-1, IEC 61158-4-1, IEC 61158-5-5, IEC 61158-5-9, IEC 61158-6-5, and IEC 61158-6-9. The basic profiles CP 1/1 (FF H1) and CP 1/2 (FF HSE) are defined in IEC 61784-1. This part of IEC 62453 provides information for integrating the FOUNDATION™ Fieldbus (FF) protocol into the FDT standard (IEC 62453-2). The standard describes communication definitions, protocol specific extensions and the means for block (e.g. transducer, resource or function blocks) representation. The new protocol specific definitions are based on FF-specifications for H1 and HSE protocols. Furthermore, the definitions contain information that is needed by systems to configure FF devices. The scope is limited to FOUNDATION™ Fieldbus device and system specific definitions.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 301: Integration von Kommunikationsprofilen - IEC 61784 Kommunikationsprofilfamilie (CPF) 1

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 301: Intégration des profils de communication - CEI 61784 CPF 1

La CEI 62453-301 :2009 donne des informations pour intégrer le protocole FOUNDATION  Fieldbus (FF) dans la norme FDT (CEI 62453-2). Elle décrit des définitions de communication, des extensions spécifiques à un protocole et les moyens pour une représentation en blocs (par exemple: transducteur, ressources ou blocs fonctionnels). La présente partie, conjointement aux autres parties de la première édition de la série CEI 62453, annule et remplace la CEI/PAS 62453-1, la CEI/PAS 62453-2, la CEI/PAS 62453-3, la CEI/PAS 62453-4 et la CEI/PAS 62453-5 publiées en 2006, et constitue une révision technique. La présente version bilingue (2013-07) correspond à la version anglaise monolingue publiée en 2009-06.
Cette publication doit être lue conjointement avec la CEI 62453-2:2009.

Specifikacija vmesnika orodja procesne naprave - 301. del: Integracija komunikacijskih profilov - IEC 61784 CPF 1 (IEC 62453-301:2009)

Družina komunikacijskih profilov 1 (splošno znana kot FOUNDATION™ Fieldbus1) opredeljuje komunikacijske profile, osnovane na IEC 61158-2, tipu 1, IEC 61158-3-1, IEC 61158-4-1, IEC 61158-5-5, IEC 61158-5-9, IEC 61158-6-5 in IEC 61158-6-9. Osnovni profili CP 1/1 (FF H1) in CP 1/2 (FF HSE) so določeni v IEC 61784-1. Ta del IEC 62453 podaja informacije za  integriranje FOUNDATION™ Fieldbus (FF) protokola v standard orodja procesne naprave (IEC 62453-2). Standard opisuje definicije komunikacij, za protokol značilne podaljške ter pomene prikaza bloka (npr. pretvornik, izvorni ali funkcijski blok). Definicije, značilne za novi protokol, so osnovane na specifikacijah FF za protokola H1 in HSE. Poleg tega definicije vsebujejo informacije, ki jih potrebujejo sistemi za konfiguracijo naprav FF. Obseg je omejen na FOUNDATION™ Fieldbus napravo ter na definicije, ki so značilne za sistem.

General Information

• Status: Published
• Publication Date: 15-Dec-2009
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 26-Nov-2009
• Due Date: 31-Jan-2010
• Completion Date: 16-Dec-2009
• Ref Project: EN 62453-301:2009 - Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1

Relations

• Amended By: SIST EN 62453-301:2010/A1:2018 - Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1 (IEC 62453-301:2009/A1:2016)
• Effective Date: 13-Nov-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62453-301:2010
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 301. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 1 (IEC 62453-301:2009)
Field device tool interface specification -- Part 301: Communication profile integration -
IEC 61784 CPF 1
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 301: Integration von
Kommunikationsprofilen - IEC 61784 Kommunikationsprofilfamilie (CPF) 1
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 301:
Intégration des profils de communication - CEI 61784 CPF 1
Ta slovenski standard je istoveten z: EN 62453-301:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 62453-301:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62453-301:2010

---------------------- Page: 2 ----------------------

SIST EN 62453-301:2010


EUROPEAN STANDARD
EN 62453-301

NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM

ICS 25.040.40; 35.100.05; 35.110



English version


Field device tool (FDT) interface specification -
Part 301: Communication profile integration -
IEC 61784 CPF 1
(IEC 62453-301:2009)



Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 301: Intégration des profils Teil 301: Integration
de communication - von Kommunikationsprofilen -
CEI 61784 CPF 1 Kommunikationsprofilfamilie (CPF) 1
(CEI 62453-301:2009) nach IEC 61784
(IEC 62453-301:2009)




This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-301:2009 E

---------------------- Page: 3 ----------------------

SIST EN 62453-301:2010
EN 62453-301:2009 - 2 -
Foreword
The text of document 65E/125/FDIS, future edition 1 of IEC 62453-301, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-301 on
2009-08-01.
Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-301:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62453-301:2010
- 3 - EN 62453-301:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61158-2 – Industrial communication networks - EN 61158-2 2008
Fieldbus specifications -
Part 2: Physical layer specification and
service definition


1) 2)
IEC 61158-3-1 – Industrial communication networks - EN 61158-3-1 2008
Fieldbus specifications -
Part 3-1: Data-link layer service definition -
Type 1 elements


IEC 61158-4-1 2007 Industrial communication networks - EN 61158-4-1 2008
Fieldbus specifications -
Part 4-1: Data-link layer protocol specification -
Type 1 elements


1) 2)
IEC 61158-5-5 – Industrial communication networks - EN 61158-5-5 2008
Fieldbus specifications -
Part 5-5: Application layer service definition -
Type 5 elements


1) 2)
IEC 61158-5-9 – Industrial communication networks - EN 61158-5-9 2008
Fieldbus specifications -
Part 5-9: Application layer service definition -
Type 9 elements


1) 2)
IEC 61158-6-5 – Industrial communication networks - EN 61158-6-5 2008
Fieldbus specifications -
Part 6-5: Application layer protocol specification -
Type 5 elements


1) 2)
IEC 61158-6-9 – Industrial communication networks - EN 61158-6-9 2008
Fieldbus specifications -
Part 6-9: Application layer protocol specification -
Type 9 elements


1) 2)
IEC 61784-1 – Industrial communication networks - Profiles - EN 61784-1 2008
Part 1: Fieldbus profiles


IEC 62453-1 2009 Field device tool (FDT) interface specification - EN 62453-1 2009
Part 1: Overview and guidance


IEC 62453-2 2009 Field device tool (FDT) interface specification - EN 62453-2 2009
Part 2: Concepts and detailed description


1)
ISO/IEC 646 – Information technology - ISO 7-bit coded - -
character set for information interchange




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 5 ----------------------

SIST EN 62453-301:2010

---------------------- Page: 6 ----------------------

SIST EN 62453-301:2010
IEC 62453-301
®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD


Field device tool (FDT) interface specification –
Part 301: Communication profile integration – IEC 61784 CPF 1


INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XF
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1049-9
® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62453-301:2010
– 2 – 62453-301 © IEC:2009(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
2 Normative references .8
3 Terms, definitions, symbols, abbreviated terms and conventions .9
3.1 Terms and definitions .9
3.2 Abbreviated terms .9
3.3 Conventions .9
3.3.1 Data type names and references to data types .9
3.3.2 Vocabulary for requirements.9
3.3.3 Use of UML .10
4 Fundamentals.10
4.1 System and FDT topology .10
4.2 FDT topology for H1 devices .10
4.3 FDT topology for HSE devices.11
4.4 Nested communication .13
5 Bus category .14
6 Access to instance and device data.14
6.1 DTM .14
6.2 BTM .14
7 Protocol specific behavior.15
7.1 Connection management.15
7.1.1 FMS connection.15
7.1.2 FDT connection .16
7.2 Abort .16
7.2.1 OnAbort Indication.16
7.2.2 Abort request.17
7.3 Relation of FMS requests and FMS responses .17
7.4 Subscription mechanism.18
7.4.1 General .18
7.4.2 Transactions for subscribing H1 .18
7.4.3 Transactions for subscribing HSE.19
7.4.4 Transactions for subscribing BTM.20
8 Protocol specific usage of general data types .20
8.1 Address.20
8.2 protocolID .20
8.3 applicationDomain.20
8.4 semanticId.21
8.4.1 Block specific definitions .21
8.4.2 Fieldbus management definitions .21
8.4.3 Fieldbus specific definitions.21
9 Protocol specific data types.22
9.1 DTM .22
9.1.1 Topology scan definitions .22
9.1.2 Parameter access.22

---------------------- Page: 8 ----------------------

SIST EN 62453-301:2010
62453-301 © IEC:2009(E) – 3 –
9.1.3 FF device data types .28
9.2 BTM .29
9.2.1 General .29
9.2.2 Parameter access - FF specific definitions.29
10 Network management data types.43
10.1 General .43
10.2 H1 network management definitions .43
10.3 HSE network management data types .43
11 Communication data types .85
11.1 Common data types .85
11.2 FF FMS data types .90
11.3 H1 communication data types.96
11.4 HSE communication data types .103
11.5 FDT FF standard block communication data types.110
12 Channel parameter data types.112
13 Device identification .114
13.1 Protocol specific handling of data type STRING .114
13.2 Common device type identification data types .115
13.3 Scan identification data types.121
13.4 Device type identification data types – provided by DTM .121
Annex A (informative) Implementation hints . 123
Annex B (normative) Levels of support.125
Bibliography.128

Figure 1 – Part 301 of the IEC 62453 series .7
Figure 2 – Object relations for H1 Device DTM .10
Figure 3 – Object relations for HSE application with DTMs and BTMs .12
Figure 4 – FMS mapping in the FDT connection.15
Figure 5 – FDT Disconnect service .16

Table 1 – Object relations for H1 Device DTM .11
Table 2 – Object relations for HSE application wtith DTMs and BTMs .13
Table 3 – FF specific protocol identifiers.14
Table 4 – Relation of FMS requests and FMS responses .17
Table 5 – Action object definitions (refer to FF-890):.23
Table 6 – Link object definitions.23
Table 7 – Alert object definitions.24
Table 8 – Trend object definitions .26
Table 9 – View definition.27
Table 10 – Domain object definitions .27
Table 11 – Program invocation object definitions .28
Table 12 – Structured FF device data types .29
Table 13 – Parameter mnemonic .30
Table 14 – Mnemonic of structured data types .38
Table 15 – Simple common data types.42

---------------------- Page: 9 ----------------------

SIST EN 62453-301:2010
– 4 – 62453-301 © IEC:2009(E)
Table 16 – H1 Fieldbus Management data types.43
Table 17 – Simple HSE Fieldbus Management Definitions .43
Table 18 – Structured HSE Network management data types.49
Table 19 – Simple common data types.85
Table 20 – Structured common data types .87
Table 21 – Simple FF FMS data types .90
Table 22 – Structured FF FMS data types.91
Table 23 – Simple H1 communication data types .97
Table 24 – Structured H1 communication data types.98
Table 25 – Simple HSE communication data types .103
Table 26 – Structured HSE communication data types .104
Table 27 – Block communication data types.111
Table 28 – Simple FF channel data types .112
Table 29 – Structured FF channel data types.113
Table 30 – FieldbusFoundation H1 table.115
Table 31 – FieldbusFoundation HSE.117
Table 32 – FieldbusFoundation blocks .119
Table 33 – Simple Fieldbus Scan definitions .121
Table 34 – Device identification data types .122
Table B.1 – Levels of support .126

---------------------- Page: 10 ----------------------

SIST EN 62453-301:2010
62453-301 © IEC:2009(E) – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 301: Communication profile integration –
IEC 61784 CPF 1


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62453-301 has been prepared by subcommittee 65E: Devices and
integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This part, in conjunction with the other parts of the first edition of the IEC 62453 series
cancels and replaces IEC/PAS 62453-1, IEC/PAS 62453-2, IEC/PAS 62453-3, IEC/PAS
62453-4 and IEC/PAS 62453-5 published in 2006, and constitutes a technical revision.
Each part of the IEC 62453-3xy series is intended to be read in conjunction with IEC 62453-2.

---------------------- Page: 11 ----------------------

SIST EN 62453-301:2010
– 6 – 62453-301 © IEC:2009(E)
The text of this standard is based on the following documents:
FDIS Report on voting
65E/125/FDIS 65E/138/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 62453 series, under the general title Field Device Tool (FDT)
interface specification, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 12 ----------------------

SIST EN 62453-301:2010
62453-301 © IEC:2009(E) – 7 –
INTRODUCTION
This part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool)
components for function control and data access within a client/server architecture. The
specification is a result of an analysis and design process to develop standard interfaces to
facilitate the development of servers and clients by multiple vendors that need to interoperate
seamlessly.
With the integration of fieldbusses into control systems, there are a few other tasks which
need to be performed. In addition to fieldbus- and device-specific tools, there is a need to
integrate these tools into higher-level system-wide planning- or engineering tools. In
particular, for use in extensive and heterogeneous control systems, typically in the area of the
process industry, the unambiguous definition of engineering interfaces that are easy to use for
all those involved is of great importance.
A device-specific software component, called DTM (Device Type Manager), is supplied by the
field device manufacturer with its device. The DTM is integrated into engineering tools via the
FDT interfaces defined in this specification. The approach to integration is in general open for
all kinds of fieldbusses and thus meets the requirements for integrating different kinds of
devices into heterogeneous control systems.
Figure 1 shows how IEC 62453-301 is aligned in the structure of the IEC 62453 series.
Part 301
Communication
profile integration –
IEC 61784 CPF 1
IEC  1120/09

Figure 1 – Part 301 of the IEC 62453 series

---------------------- Page: 13 ----------------------

SIST EN 62453-301:2010
– 8 – 62453-301 © IEC:2009(E)
FIELD DEVICE TOOL (FDT) INTERFACE SPECIFICATION –

Part 301: Communication profile integration –
IEC 61784 CPF 1



1 Scope
™
1
Communication Profile Family 1 (commonly known as FOUNDATION Fieldbus ) defines
communication profiles based on IEC 61158-2, Type 1, IEC 61158-3-1, IEC 61158-4-1,
IEC 61158-5-5, IEC 61158-5-9, IEC 61158-6-5, and IEC 61158-6-9. The basic profiles CP 1/1
(FF H1) and CP 1/2 (FF HSE) are defined in IEC 61784-1.
This part of IEC 62453 provides information for integrating the FOUNDATION™ Fieldbus (FF)
protocol into the FDT standard (IEC 62453-2).
The standard describes communication definitions, protocol specific extensions and the
means for block (e.g. transducer, resource or function blocks) representation.
The new protocol specific definitions are based on FF-specifications for H1 and HSE
protocols. Furthermore, the definitions contain information that is needed by systems to
configure FF devices.
The scope is limited to FOUNDATION™ Fieldbus device and system specific definitions.
2 Normative references
The following referenced documents are indispensable for the application of this specification.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies
IEC 61158-2, Industrial communication networks – Fieldbus specifications – Part 2: Physical
layer specification and service definition
IEC 61158-3-1, Industrial communication networks – Fieldbus specifications – Part 3-1: Data-
link layer service definition – Type 1 elements
IEC 61158-4-1:2007, Industrial communication networks – Fieldbus specifications – Part 4-1
Data-link layer protocol specification – Type 1 elements
IEC 61158-5-5, Industrial communication networks – Fieldbus specifications – Part 5-5:
Application layer service definition – Type 5 elements
IEC 61158-5-9, Industrial communication networks – Fieldbus specifications – Part 5-9:
Application layer service definition – Type 9 elements
IEC 61158-6-5, Industrial communication networks – Fieldbus specifications – Part 6-5:
Application layer protocol specification – Type 5 elements
—————————
1
 FOUNDATION™ Fieldbus is a trade name of the non-profit organization Fieldbus Foundation. This information
is given for the convenience of users of this International Standard and does not constitute an endorsement by
IEC of the trade name holder or any of its products. Compliance to this standard does not require use of the
trade name Foundation Fieldbus™. Use of the trade name FOUNDATION™ Fieldbus requires permission of
Fieldb
...