Field device tool (FDT) interface specification - Part 301: Communication profile integration - IEC 61784 CPF 1

IEC 62453-301:2009(E) provides information for integrating the FOUNDATIONTM Fieldbus (FF) protocol into the FDT standard (IEC 62453-2). It describes communication definitions, protocol specific extensions and the means for block (e.g. transducer, resource or function blocks) representation. The new protocol specific definitions are based on FF-specifications for H1 and HSE protocols. Furthermore, the definitions contain information that is needed by systems to configure FF devices. Communication Profile Family 1 (commonly known as FOUNDATIONTM Fieldbus) defines communication profiles based on IEC 61158-2, Type 1, IEC 61158-3-1, IEC 61158-4-1, IEC 61158-5-5, IEC 61158-5-9, IEC 61158-6-5, and IEC 61158-6-9. The basic profiles CP 1/1 (FF H1) and CP 1/2 (FF HSE) are defined in IEC 61784-1. This publication is to be read in conjunction with IEC 62453-2:2009.

Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 301: Integration von Kommunikationsprofilen - Kommunikationsprofilfamilie (CPF) 1 nach IEC 61784

Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 301: Intégration des profils de communication - CEI 61784 CPF 1

La CEI 62453-301 :2009 donne des informations pour intégrer le protocole FOUNDATION Fieldbus (FF) dans la norme FDT (CEI 62453-2). Elle décrit des définitions de communication, des extensions spécifiques à un protocole et les moyens pour une représentation en blocs (par exemple: transducteur, ressources ou blocs fonctionnels). La présente partie, conjointement aux autres parties de la première édition de la série CEI 62453, annule et remplace la CEI/PAS 62453-1, la CEI/PAS 62453-2, la CEI/PAS 62453-3, la CEI/PAS 62453-4 et la CEI/PAS 62453-5 publiées en 2006, et constitue une révision technique. La présente version bilingue (2013-07) correspond à la version anglaise monolingue publiée en 2009-06. Cette publication doit être lue conjointement avec la CEI 62453-2:2009.

Specifikacija vmesnika orodja procesne naprave - 301. del: Integracija komunikacijskih profilov - IEC 61784 CPF 1 (IEC 62453-301:2009)

Družina komunikacijskih profilov 1 (splošno znana kot FOUNDATION™ Fieldbus1) opredeljuje komunikacijske profile, osnovane na IEC 61158-2, tipu 1, IEC 61158-3-1, IEC 61158-4-1, IEC 61158-5-5, IEC 61158-5-9, IEC 61158-6-5 in IEC 61158-6-9. Osnovni profili CP 1/1 (FF H1) in CP 1/2 (FF HSE) so določeni v IEC 61784-1. Ta del IEC 62453 podaja informacije za  integriranje FOUNDATION™ Fieldbus (FF) protokola v standard orodja procesne naprave (IEC 62453-2). Standard opisuje definicije komunikacij, za protokol značilne podaljške ter pomene prikaza bloka (npr. pretvornik, izvorni ali funkcijski blok). Definicije, značilne za novi protokol, so osnovane na specifikacijah FF za protokola H1 in HSE. Poleg tega definicije vsebujejo informacije, ki jih potrebujejo sistemi za konfiguracijo naprav FF. Obseg je omejen na FOUNDATION™ Fieldbus napravo ter na definicije, ki so značilne za sistem.

General Information

Status
Published
Publication Date
14-Oct-2009
Withdrawal Date
31-Jul-2012
Current Stage
6060 - Document made available - Publishing
Start Date
15-Oct-2009
Completion Date
15-Oct-2009

Relations

Buy Standard

Standard
EN 62453-301:2010
English language
131 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2010
Specifikacija vmesnika orodja procesne naprave - 301. del: Integracija
komunikacijskih profilov - IEC 61784 CPF 1 (IEC 62453-301:2009)
Field device tool interface specification -- Part 301: Communication profile integration -
IEC 61784 CPF 1
Field Device Tool (FDT)-Schnittstellenspezifikation - Teil 301: Integration von
Kommunikationsprofilen - IEC 61784 Kommunikationsprofilfamilie (CPF) 1
Spécification des interfaces des outils des dispositifs de terrain (FDT) - Partie 301:
Intégration des profils de communication - CEI 61784 CPF 1
Ta slovenski standard je istoveten z: EN 62453-301:2009
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 62453-301
NORME EUROPÉENNE
October 2009
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.05; 35.110

English version
Field device tool (FDT) interface specification -
Part 301: Communication profile integration -
IEC 61784 CPF 1
(IEC 62453-301:2009)
Spécification des interfaces des outils Field Device Tool (FDT)-
des dispositifs de terrain (FDT) - Schnittstellenspezifikation -
Partie 301: Intégration des profils Teil 301: Integration
de communication - von Kommunikationsprofilen -
CEI 61784 CPF 1 Kommunikationsprofilfamilie (CPF) 1
(CEI 62453-301:2009) nach IEC 61784
(IEC 62453-301:2009)
This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels

© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62453-301:2009 E
Foreword
The text of document 65E/125/FDIS, future edition 1 of IEC 62453-301, prepared by SC 65E, Devices and
integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation,
was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-301 on
2009-08-01.
Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-08-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62453-301:2009 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62453-301:2009
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 61158-2 – Industrial communication networks - EN 61158-2 2008
Fieldbus specifications -
Part 2: Physical layer specification and
service definition
1) 2)
IEC 61158-3-1 – Industrial communication networks - EN 61158-3-1 2008
Fieldbus specifications -
Part 3-1: Data-link layer service definition -
Type 1 elements
IEC 61158-4-1 2007 Industrial communication networks - EN 61158-4-1 2008
Fieldbus specifications -
Part 4-1: Data-link layer protocol specification -
Type 1 elements
1) 2)
IEC 61158-5-5 – Industrial communication networks - EN 61158-5-5 2008
Fieldbus specifications -
Part 5-5: Application layer service definition -
Type 5 elements
1) 2)
IEC 61158-5-9 – Industrial communication networks - EN 61158-5-9 2008
Fieldbus specifications -
Part 5-9: Application layer service definition -
Type 9 elements
1) 2)
IEC 61158-6-5 – Industrial communication networks - EN 61158-6-5 2008
Fieldbus specifications -
Part 6-5: Application layer protocol specification -
Type 5 elements
1) 2)
IEC 61158-6-9 – Industrial communication networks - EN 61158-6-9 2008
Fieldbus specifications -
Part 6-9: Application layer protocol specification -
Type 9 elements
1) 2)
IEC 61784-1 – Industrial communication networks - Profiles - EN 61784-1 2008
Part 1: Fieldbus profiles
IEC 62453-1 2009 Field device tool (FDT) interface specification - EN 62453-1 2009
Part 1: Overview and guidance
IEC 62453-2 2009 Field device tool (FDT) interface specification - EN 62453-2 2009
Part 2: Concepts and detailed description

1)
ISO/IEC 646 – Information technology - ISO 7-bit coded - -
character set for information interchange

1)
Undated reference.
2)
Valid edition at date of issue.

IEC 62453-301 ®
Edition 1.0 2009-06
INTERNATIONAL
STANDARD
Field device tool (FDT) interface specification –
Part 301: Communication profile integration – IEC 61784 CPF 1

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XF
ICS 25.040.40; 35.100.05; 35.110 ISBN 2-8318-1049-9
– 2 – 62453-301 © IEC:2009(E)
CONTENTS
FOREWORD.5
INTRODUCTION.7
1 Scope.8
2 Normative references .8
3 Terms, definitions, symbols, abbreviated terms and conventions .9
3.1 Terms and definitions .9
3.2 Abbreviated terms .9
3.3 Conventions .9
3.3.1 Data type names and references to data types .9
3.3.2 Vocabulary for requirements.9
3.3.3 Use of UML .10
4 Fundamentals.10
4.1 System and FDT topology .10
4.2 FDT topology for H1 devices .10
4.3 FDT topology for HSE devices.11
4.4 Nested communication .13
5 Bus category .14
6 Access to instance and device data.14
6.1 DTM .14
6.2 BTM .14
7 Protocol specific behavior.15
7.1 Connection management.15
7.1.1 FMS connection.15
7.1.2 FDT connection .16
7.2 Abort .16
7.2.1 OnAbort Indication.16
7.2.2 Abort request.17
7.3 Relation of FMS requests and FMS responses .17
7.4 Subscription mechanism.18
7.4.1 General .18
7.4.2 Transactions for subscribing H1 .18
7.4.3 Transactions for subscribing HSE.19
7.4.4 Transactions for subscribing BTM.20
8 Protocol specific usage of general data types .20
8.1 Address.20
8.2 protocolID .20
8.3 applicationDomain.20
8.4 semanticId.21
8.4.1 Block specific definitions .21
8.4.2 Fieldbus management definitions .21
8.4.3 Fieldbus specific definitions.21
9 Protocol specific data types.22
9.1 DTM .22
9.1.1 Topology scan definitions .22
9.1.2 Parameter access.22

62453-301 © IEC:2009(E) – 3 –
9.1.3 FF device data types .28
9.2 BTM .29
9.2.1 General .29
9.2.2 Parameter access - FF specific definitions.29
10 Network management data types.43
10.1 General .43
10.2 H1 network management definitions .43
10.3 HSE network management data types .43
11 Communication data types .85
11.1 Common data types .85
11.2 FF FMS data types .90
11.3 H1 communication data types.96
11.4 HSE communication data types .103
11.5 FDT FF standard block communication data types.110
12 Channel parameter data types.112
13 Device identification .114
13.1 Protocol specific handling of data type STRING .114
13.2 Common de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.