SIST EN 500-2:2007

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

This part of EN 500 specifies the safety requirements for road-milling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".

Bewegliche Straßenbaumaschinen - Sicherheit - Teil 2: Besondere Anforderungen an Straßenfräsen

Dieser Teil von EN 500 enthält die Sicherheitsanforderungen für Straßenfräsen, wie in Abschnitt 3 definiert, und behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf diese Maschinen zutreffen, wenn sie bestimmungsgemäß verwendet werden. Die nach vernünftigem Ermessen für den Hersteller vorhersehbare Nutzung der Maschine außerhalb der bestimmungsgemäßen Verwendung ist ebenfalls berücksichtigt.
Dieser Teil von EN 500 enthält ergänzende Festlegungen zu EN 500-1 Gemeinsame Anforderungen.

Machines mobiles pour la construction de routes - Sécurité - Partie 2 : Prescriptions spécifiques pour fraiseuses routieres

Premični stroji za gradnjo cest - Varnost - 2. del: Posebne zahteve za stroje za rezkanje cestišča

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2006
• Withdrawal Date: 17-Nov-2008
• ICS: 93.080.10 - Road construction
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 17-Nov-2008
• Due Date: 10-Dec-2008
• Completion Date: 18-Nov-2008
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: EN 500-2:2006 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines

Relations

• Consolidated By: SIST EN 500-2:2007+A1:2008 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 500-2:2007+A1:2008 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
• Effective Date: 19-Jan-2023
• Replaces: SIST EN 500-2:2000 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
• Effective Date: 01-Jan-2007
• Consolidated By: SIST EN 500-2:2007+A1:2008 - Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines
• Effective Date: 01-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bewegliche Straßenbaumaschinen - Sicherheit - Teil 2: Besondere Anforderungen an StraßenfräsenMachines mobiles pour la construction de routes - Sécurité - Partie 2 : Prescriptions spécifiques pour fraiseuses routieresMobile road construction machinery - Safety - Part 2: Specific requirements for road-milling machines93.080.10Gradnja cestRoad constructionICS:Ta slovenski standard je istoveten z:EN 500-2:2006SIST EN 500-2:2007en01-januar-2007SIST EN 500-2:2007SLOVENSKI
STANDARDSIST EN 500-2:20001DGRPHãþD



SIST EN 500-2:2007



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 500-2October 2006ICS 91.220Supersedes EN 500-2:1995
English VersionMobile road construction machinery - Safety - Part 2: Specificrequirements for road-milling machinesMachines mobiles pour la construction de routes - Sécurité- Partie 2 : Prescriptions spécifiques pour fraiseusesroutièresBewegliche Straßenbaumaschinen - Sicherheit - Teil 2:Besondere Anforderungen an StraßenfräsenThis European Standard was approved by CEN on 17 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 500-2:2006: ESIST EN 500-2:2007



EN 500-2:2006 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms and definitions.7 4 List of significant hazards.7 5 Safety requirements and/or protective measures.7 5.1 Lighting, signalling and marking lights and reflex-reflector devices.7 5.2 Operation and handling.7 5.3 Operator's station.7 5.4 Operator's seat.7 5.5 Controls and indicators.7 5.6 Starting.8 5.7 Stopping.8 5.8 Access system to operator's station and to maintenance points.8 5.9 Protection.8 5.10 Pressurised systems.10 5.11 Fire protection.10 5.12 Hot surfaces.10 5.13 Signal devices and warning signs.10 5.14 Liquid gas units.10 5.15 Electrical and electronic systems.10 5.16 Electro-magnetic compatibility (EMC).11 5.17 Noise and vibration.11 5.18 Conveyors.11 6 Verification of safety requirements and/or protective measures.11 7 Information for the user.11 Annex A (normative)
Noise test code for road-milling machines.12 Annex B (informative)
Examples of road-milling machines.17 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EC Directive 98/37/EC.19 Bibliography.20
Figures Figure 1 — Milling equipment.9 Figure 2 — Warning sign.10 Figure A.1 — Basic length L.13 Figure A.2 — Microphone positions.13 SIST EN 500-2:2007



EN 500-2:2006 (E) 3 Figure B.1 — Road-milling machine with front-loading conveyor.17 Figure B.2 — Road-milling machine with rear-loading conveyor.18 Figure B.3 — Road-milling machine without conveyor.18 SIST EN 500-2:2007



EN 500-2:2006 (E) 4 Foreword This document (EN 500-2:2006) has been prepared by Technical Committee CEN/TC 151 “Construction equip-ment and building material machines — Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2007, and conflicting national standards shall be withdrawn at the latest by October 2008. This document supersedes EN 500-2:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. EN 500 “Mobile road construction machinery — Safety” comprises the following parts:  Part 1: Common requirements;  Part 2: Specific requirements for road-milling machines;  Part 3: Specific requirements for soil-stabilising machines and recycling machines;  Part 4: Specific requirements for compaction machines;  Part 6: Specific requirements for paver-finishers. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-tries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto-nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 500-2:2007



EN 500-2:2006 (E) 5 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indi-cated in the scope of this European Standard. When provisions of this type C standard are different from those stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been de-signed and built according to the provisions of this type C standard. SIST EN 500-2:2007



EN 500-2:2006 (E) 6
1 Scope This part of EN 500 specifies the safety requirements for road-milling machines as defined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable. This part of EN 500 contains additional requirements to EN 500-1 ”Common requirements”. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 500-1:2006, Mobile road construction machinery — Safety — Part 1: Common requirements EN 811:1996, Safety of machinery — Safety distances to prevent danger zones being reached by the lower limbs EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 61310-1:1995, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1:1995) EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994) EN ISO 11201:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound pressure levels at a work station and at other specified positions — Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995) EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic termi-nology, methodology (ISO 12100-1:2003) SIST EN 500-2:2007



EN 500-2:2006 (E) 7 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following ap-ply. 3.1 road-milling machines mobile road construction machines used to mill material from paved surfaces 3.2 milling equipment power-driven cylindrical bodies on which the milling tools are fitted. The cylindrical bodies rotate during the milling operation 4 List of significant hazards Annex F of EN 500-1:2006 applies with the following exception: Table 1 5 Hazards generated by vibration 5.1 Hand-arm vibrations
5 Safety requirements and/or protective measures 5.1 Lighting, signalling and marking lights and reflex-reflector devices 5.2 of EN 500-1:2006 applies. 5.2 Operation and handling 5.3 of EN 500-1:2006 applies with the following addition:  to minimise the risk of dust, appropriate provisions (e.g. a water sprinkling system) shall be made. 5.3 Operator's station 5.4 of EN 500-1:2006 applies. with the following exception: 5.4.2 of EN 500-1:2006, first paragraph, does not apply for road-milling machines. 5.4 Operator's seat 5.5 of EN 500-1:2006 applies. 5.5 Controls and indicators 5.6 of EN 500-1:2006 applies. SIST EN 500-2:2007



EN 500-2:2006 (E) 8 5.6 Starting 5.7 of EN 500-1:2006 applies. 5.7 Stopping 5.8 of EN 500-1:2006 applies with the following addition:  it shall be possible to stop the milling equipment, even while the power unit (engine) is running;  where additional controls to operate the machine are provided, an emergency stop shall be available. 5.8 Access system to op
...