SIST EN 500-3:2007+A1:2008
(Main)Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabilising machines and recycling machines
This part of EN 500 specifies the safety requirements for soil-stabilising machines and recycling machines as de-fined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these ma-chines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This part of EN 500 contains additional requirements to EN 500-1 "Common requirements".
Bewegliche Straßenbaumaschinen - Sicherheit - Teil 3: Besondere Anforderungen an Bodenstabilisierungsmaschinen und Recyclingmaschinen
Machines mobiles pour la construction de routes - Sécurité - Partie 3: Prescriptions spécifiques pour engins de stabilisation de sol et machines de recyclage
La présente partie de l’EN 500 précise les prescriptions de sécurité pour les engins de stabilisation de sol et les
machines de recyclage tels que définis à l’Article 3 et traite de tous les phénomènes dangereux, situations
dangereuses et évènements dangereux significatifs relatifs aux machines lorsqu’elles sont utilisées normalement et
dans des conditions de mauvaise utilisation qui sont raisonnablement prévisibles.
La présente partie de l’EN 500 fournit des prescriptions complémentaires !à l’EN 500-1+A1" «Prescriptions
communes».
Premični stroji za gradnjo cest - Varnost - 3. del: Posebne zahteve za stroje za stabiliziranje tal in stroje za obnavljanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 500-3:2007+A1:2008
01-december-2008
3UHPLþQLVWURML]DJUDGQMRFHVW9DUQRVWGHO 3RVHEQH]DKWHYH]DVWURMH]D
VWDELOL]LUDQMHWDOLQVWURMH]DREQDYOMDQMH
Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-
stabilising machines and recycling machines
Bewegliche Straßenbaumaschinen - Sicherheit - Teil 3: Besondere Anforderungen an
Bodenstabilisierungsmaschinen und Recyclingmaschinen
Machines mobiles pour la construction de routes - Sécurité - Partie 3: Prescriptions
spécifiques pour engins de stabilisation de sol et machines de recyclage
Ta slovenski standard je istoveten z: EN 500-3:2006+A1:2008
ICS:
93.080.10 Gradnja cest Road construction
SIST EN 500-3:2007+A1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 500-3:2007+A1:2008
---------------------- Page: 2 ----------------------
SIST EN 500-3:2007+A1:2008
EUROPEAN STANDARD
EN 500-3:2006+A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2008
ICS 93.080.10 Supersedes EN 500-3:2006
English Version
Mobile road construction machinery - Safety - Part 3: Specific
requirements for soil-stabilising machines and recycling
machines
Machines mobiles pour la construction de routes - Sécurité Bewegliche Straßenbaumaschinen - Sicherheit - Teil 3:
- Partie 3: Prescriptions spécifiques pour engins de Besondere Anforderungen an
stabilisation de sol et machines de recyclage Bodenstabilisierungsmaschinen und Recyclingmaschinen
This European Standard was approved by CEN on 17 August 2006 and includes Amendment 1 approved by CEN on 11 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 500-3:2006+A1:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 500-3:2007+A1:2008
EN 500-3:2006+A1:2008 (E)
Contents Page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 List of significant hazards .7
5 Safety requirements and/or protective measures.7
5.1 Lighting, signalling and marking lights and reflex-reflector devices.7
5.2 Operation and handling .7
5.3 Operator's station .7
5.4 Operator's seat.7
5.5 Controls and indicators .7
5.6 Starting .7
5.7 Stopping .7
5.8 Access system to operator's station and to maintenance points .8
5.9 Protection .8
5.10 Pressurised systems.9
5.11 Fire protection.9
5.12 Hot surfaces .10
5.13 Signal devices and warning signs .10
5.14 Electrical and electronic systems.10
5.15 Electro-magnetic compatibility (EMC).10
5.16 Noise and vibration.10
5.17 Conveyors .10
6 Verification of safety requirements/measures.10
7 Information for the user .11
7.1 Warning signals and devices .11
7.2 Instruction handbook .11
7.3 Marking .11
Annex A (normative) Braking systems – Performance requirements and test procedures.12
Annex B (normative) Noise test code for soil-stabilising machines and recycling machines.13
Annex C (normative) Examples of soil-stabilising machines and recycling machines .18
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 98/37/EC .21
Annex ZB (informative) !!!!Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC"""".22
2
---------------------- Page: 4 ----------------------
SIST EN 500-3:2007+A1:2008
EN 500-3:2006+A1:2008 (E)
Figures
Figure 1 — Mixing equipment.9
Figure 2 — Warning sign .10
Figure B.1 — Basic length L.14
Figure B.2 — Microphone positions .14
Figure C.1 — Central soil-stabilising machine with horizontal rotor .18
Figure C.2 — Grader-based central soil-stabilising machine with horizontal mixing drum.19
Figure C.3 — Recycling machine with paving screed .19
Figure C.4 — Rear soil-stabilising machine with horizontal mixing drum .20
Figure C.5 — Crawler-based rear soil-stabilising machine with horizontal mixing drum .20
Figure C.6 — Rear soil-stabilising machine with vertical mixing unit .20
3
---------------------- Page: 5 ----------------------
SIST EN 500-3:2007+A1:2008
EN 500-3:2006+A1:2008 (E)
Foreword
This document (EN 500-3:2006+A1:2008) has been prepared by Technical Committee CEN/TC 151 “Construction
equipment and building material machines — Safety”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by
December 2009.
This document supersedes !EN 500-3:2006".
This document includes Amendment 1, approved by CEN on 2008-09-11.
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
This document has been prepared under a mandate given to CEN by the European Commission and the European
Free Trade Association and supports essential requirements of EU Directive(s).
!For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document."
EN 500 ”Mobile road construction machinery — Safety” comprises the following parts:
Part 1: Common requirements;
Part 2: Specific requirements for road-milling machines;
Part 3: Specific requirements for soil-stabilising machines and recycling machines;
Part 4: Specific requirements for compaction machines;
Part 6: Specific requirements for paver-finishers.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun-
tries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Den-
mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and
United Kingdom.
4
---------------------- Page: 6 ----------------------
SIST EN 500-3:2007+A1:2008
EN 500-3:2006+A1:2008 (E)
Introduction
This European Standard is a type C standard as stated in EN ISO 12100-1.
The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indi-
cated in the scope of this European Standard.
When provisions of this type C standard are different from those which are stated in type A or B standards, the pro-
visions of this type C standard take precedence over the provisions of the other standards for machines that have
been designed and built according to the provisions of this type C standard.
5
---------------------- Page: 7 ----------------------
SIST EN 500-3:2007+A1:2008
EN 500-3:2006+A1:2008 (E)
1 Scope
This part of EN 500 specifies the safety requirements for soil-stabilising machines and recycling machines as de-
fined in Clause 3 and deals with all significant hazards, hazardous situations and events relevant to these ma-
chines, when they are used as intended and under conditions of misuse which are reasonably foreseeable.
This part of EN 500 contains additional requirements to EN 500-1 “Common requirements”.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 500-1:2006, Mobile road construction machinery — Safety — Part 1: Common requirements.
EN 811:1996, Safety of machinery — Safety distances to prevent danger zones being reached by the lower limbs.
EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and
movable guards.
EN 61310-1:1995, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual,
auditory and tactile signals (IEC 61310-1:1995).
EN ISO 3450:1996, Earth-moving machinery — Braking systems of rubber-tyred machines — Systems and per-
formance requirements and test procedures (ISO 3450:1996).
EN ISO 3744:1995, Acoustics — Determination of sound power levels of noise sources using sound pressure —
Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994).
EN ISO 11201:1995, Acoustics — Noise emitted by machinery and equipment — Measurement of emission sound
pressure levels at a work station and at other specified positions — Engineering method in an essentially free field
over a reflecting plane (ISO 11201:1995).
EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic termi-
nology, methodology (ISO 12100-1:2003).
ISO 8643:1997, Earth-moving machinery — Hydraulic excavator and backhoe loader boom-lowering control de-
vice — Requirements and tests.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003 and the following ap-
ply.
3.1
soil-stabilising machines
mobile machines used for the purpose of mixing fillers and/or binders, e.g. cement, lime, with natural soil to im-
prove the mechanical and physical properties of the soil material
3.2
recycling machines
mobile machines used for the reinstatement of road surfaces using self-removed material mixed with fillers and/or
binders and reapplied in situ
6
---------------------- Page: 8 ----------------------
SIST EN 500-3:2007+A1:2008
EN 500-3:2006+A1:2008 (E)
3.3
mixing equipment
power-driven drums which rotate during the mixing operation. The surface of the drums is equipped with tools for
the mixing process
4 List of significant hazards
Annex F of EN 500-1:2006 applies with the following exception:
Table 1
5 Hazards generated by vibration
5.1 Hand-arm vibrations
5 Safety requirements and/or protective measures
5.1 Lighting, signalling and marking lights and reflex-reflector devices
5.2 of EN 500-1:2006 applies.
5.2 Operation and handling
5.3 of EN 500-1:2006 applies.
5.3 Operator's station
5.4 of EN 500-1:2006 applies with the following addition and exception:
the operator’s station of soil-stabilising machines shall be provided with a cab to protect the operator against
dust generated by the mixing process.
5.4 Operator's seat
5.5 of EN 500-1:2006 applies.
5.5 Controls and indicators
5.6 of EN 500-1:2006 applies.
5.6 Starting
5.7 of EN 500-1:2006 applies.
5.7 Stopping
5.8 of EN 500-1:2006 applies with the following addition:
it shall be possible to stop the mixing equipment, even while the power unit (engine) is running;
brake systems of wheeled soil-stabilising machines shall comply with Annex A.
7
---------------------- Page: 9 ----------------------
SIST EN 500-3:2007+A1:2008
EN 500-3:2006+A1:2008 (E)
5.8 Access system to operator's station and to maintenance points
5.9 of EN 500-1:2006 applies with the following exception:
the height of the lowest step of access system to the operator's station may be 700 mm abo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.