SIST EN IEC 62828-1:2018

Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters (IEC 62828-1:2017)

This Part of IEC 62828 establishes a general framework for defining reference conditions and
test procedures applicable to all types of industrial and process measurement transmitters
(PMTs) used in measuring and control systems for industrial process and machinery. These
reference test conditions are divided into “standard reference conditions”, which apply when
determining the accuracy of measurement, and “ambient and process reference conditions”,
which are used to assess the influence of external quantities on the measurement.
For the purpose of this document, an analogue PMT is a process measurement transmitter
with an analogue current or voltage output, irrespective of the technology adopted and the
complexity of the circuitry. All the other process measurement transmitters, with digital output
only or with hybrid analogue and digital output (e.g. HART®), are considered to be digital
PMTs.
For general test procedures, reference is made to IEC 62828-1, which is applicable to all
types of industrial and process measurement transmitters.
Additional specific test procedures for given types of PMTs (pressure, temperature, level,
flow) are covered by other parts of this series.
NOTE 1 In industrial and process applications, to indicate the process measurement transmitters it is common
also to use the terms “industrial transmitters”, or “process transmitters”.
NOTE 2 For better clarity, when the complete definition “industrial and process measurement transmitter” makes
the sentence too long in this document, the short term “transmitter” is used instead.
Proximity devices with analogue output are excluded from the scope of this document.

Referenzbedingungen und Testmethoden für Industrie- und Prozessmessgrößenumformer - Teil 1: Allgemeine Testmethoden für alle Arten von Messumformern (IEC 62828-1:2017)

Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 1: Procédures générales pour tous les types de transmetteurs (IEC 62828-1:2017)

L'IEC 62828-1:2017 établit un cadre général de définition des conditions de référence et procédures d’essais applicables à tous les types de transmetteurs de mesure industrielle et de processus (PMT - process measurement transmitter) utilisés dans les systèmes de mesure et de commande des processus et machines industriels. Ces conditions d’essais de référence sont divisées en "conditions de référence normalisées", qui s’appliquent lors de la détermination de l’exactitude de mesure, et en "conditions de référence ambiantes et de processus", utilisées pour évaluer l’influence de grandeurs externes sur la mesure. La série IEC 62828 annule et remplace la série IEC 60770 et propose des révisions pour la série IEC 61298.

Referenčni pogoji in postopki za preskušanje industrijskih in procesnih merilnih oddajnikov - 1. del: Splošni postopki za vse vrste oddajnikov (IEC 62828-1:2017)

Ta del standarda IEC 62828 določa splošen okvir za opredeljevanje referenčnih pogojev in preskusnih postopkov, ki se uporabljajo za vse vrste industrijskih in procesnih merilnih oddajnikov (PMT), uporabljenih v merilnih in kontrolnih sistemih za industrijske procese in stroje. Ti referenčni preskusni pogoji so razdeljeni na »standardne referenčne pogoje«, ki se uporabljajo pri določanju točnosti meritve, ter »okoljske in procesne referenčne pogoje«, ki se uporabljajo pri ocenjevanju vpliva zunanjih dejavnikov na meritev.
V tem dokumentu uporabljen izraz analogni PMT označuje procesni merilni oddajnik z izhodom v obliki analognega toka ali napetosti, ki ni odvisen od uporabljene tehnologije in zapletenosti vezja. Vsi drugi procesni merilni oddajniki z izključno digitalnim izhodom ali hibridnim analognim in digitalnim izhodom (npr. HART®) se obravnavajo kot digitalni procesni merilni oddajniki.
Za splošne preskusne postopke je omenjen standard IEC 62828-1, ki se uporablja za vse vrste industrijskih in procesnih merilnih oddajnikov.
Dodatni specifični preskusni postopki za navedene vrste procesnih merilnih oddajnikov (tlak, temperatura, raven, pretok) so obravnavani v drugih delih te skupine standardov.
OPOMBA 1: V industrijskih in procesnih uporabah so procesni merilni oddajniki pogosto poimenovani tudi »industrijski oddajniki« ali »procesni oddajniki«.
OPOMBA 2: Kadar bi bil stavek zaradi zapisa celotnega izraza »industrijski in procesni merilni oddajniki« v tem dokumentu predolg, je za boljšo razločnost uporabljen krajši izraz »oddajnik«. Bližinske naprave z analognim izhodom niso obravnavane v tem dokumentu.

General Information

• Status: Published
• Publication Date: 25-Apr-2018
• ICS: 25.040.40 - Industrial process measurement and control
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 15-Feb-2018
• Due Date: 22-Apr-2018
• Completion Date: 26-Apr-2018
• Ref Project: EN IEC 62828-1:2018 - Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62828-1:2018
01-junij-2018
Referenčni pogoji in postopki za preskušanje industrijskih in procesnih merilnih
oddajnikov - 1. del: Splošni postopki za vse vrste oddajnikov (IEC 62828-1:2017)
Reference conditions and procedures for testing industrial and process measurement
transmitters - Part 1: General procedures for all types of transmitters (IEC 62828-1:2017)
Referenzbedingungen und Testmethoden für Industrie- und
Prozessmessgrößenumformer - Teil 1: Allgemeine Testmethoden für alle Arten von
Messumformern (IEC 62828-1:2017)
Conditions de référence et procédures pour l'essai des transmetteurs de mesure
industrielle et de processus - Partie 1: Procédures générales pour tous les types de
transmetteurs (IEC 62828-1:2017)
Ta slovenski standard je istoveten z: EN IEC 62828-1:2018
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN IEC 62828-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62828-1:2018

---------------------- Page: 2 ----------------------
SIST EN IEC 62828-1:2018


EUROPEAN STANDARD EN IEC 62828-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2018
ICS 17.020; 25.040.40

English Version
Reference conditions and procedures for testing industrial and
process measurement transmitters - Part 1: General procedures
for all types of transmitters
(IEC 62828-1:2017)
Conditions de référence et procédures pour l'essai des Referenzbedingungen und Testmethoden für Industrie- und
transmetteurs de mesure industrielle et de processus - Prozessmessgrößenumformer - Teil 1: Allgemeine
Partie 1: Procédures générales pour tous les types de Testmethoden für alle Arten von Messumformern
transmetteurs (IEC 62828-1:2017)
(IEC 62828-1:2017)
This European Standard was approved by CENELEC on 2017-12-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62828-1:2018 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62828-1:2018
EN IEC 62828-1:2018 (E)

European foreword
The text of document 65B/1100/FDIS, future edition 1 of IEC 62828-1, prepared by IEC/TC 65B
"Measurement and control devices, of IEC technical committee 65: Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62828-1:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-09-15
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-12-15
• latest date by which the national
standards conflicting with the
document have to be withdrawn

EN IEC 62828 (series) supersedes EN 60770 (series).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62828-1:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61360-4:2005 DB NOTE Harmonized as EN 61360-4:2005 (not modified)
corrigendum Dec. 2005.
IEC 61987-14:2016 NOTE Harmonized as EN 61987-14:2016 (not modified).
IEC 62382:2012 NOTE Harmonized as EN 62382:2013 (not modified).
CISPR 11:2015 NOTE Harmonized as EN 55011:2016 (modified).


2

---------------------- Page: 4 ----------------------
SIST EN IEC 62828-1:2018
EN IEC 62828-1:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60068-2-1 -  Environmental testing -- Part 2-1: Tests - EN 60068-2-1 -
Test A: Cold
IEC 60068-2-2 -  Environmental testing -- Part 2-2: Tests - EN 60068-2-2 -
Test B: Dry heat
IEC 60068-2-6 -  Environmental testing -- Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-27 -  Environmental testing -- Part 2-27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60068-2-31 -  Environmental testing -- Part 2-31: Tests - EN 60068-2-31 -
Test Ec: Rough handling shocks, primarily
for equipment-type specimens
IEC 60068-2-78 -  Environmental testing -- Part 2-78: Tests - EN 60068-2-78 -
Test Cab: Damp heat, steady state
IEC 60079-10 series Electrical apparatus for explosive gas EN 60079-10 series
atmospheres -- Part 10: Classification of
hazardous areas
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code)
  +EN 1993
60529:1991/corrige
ndum May 1993
IEC 60529 AMD 1 1999 Degrees of protection provided by - -
enclosures (IP_code); Amendment_1
IEC 60529 AMD 2 2013 Degrees of protection provided by - -
enclosures (IP_code); Amendment_2
IEC 60654-1 1993 Industrial-process measurement and EN 60654-1 1993
control equipment - Operating conditions --
Part 1: Climatic conditions
IEC 60654-3 1983 Operating conditions for industrial-process EN 60654-3 1997
measurement and control equipment --
Part 3: Mechanical influences
IEC 60654-4 1987 Operating conditions for industrial-process EN 60654-4 1997
measurement and control equipment --
Part 4: Corrosive and erosive influences
IEC 60721-3-1 -  Classification of environmental conditions - EN 60721-3-1 -
- Part 3: Classification of groups of
environmental parameters and their
severities -- Section 1: Storage
IEC 60721-3-2 -  Classification of environmental conditions - EN 60721-3-2 -
- Part 3: Classification of groups of
environmental parameters and their
severities -- Section 2: Transportation
3

---------------------- Page: 5 ----------------------
SIST EN IEC 62828-1:2018
EN IEC 62828-1:2018 (E)

IEC 61010-1 2010 Safety requirements for electrical EN 61010-1 2010
equipment for measurement, control and
laboratory use -- Part 1: General
requirements
IEC 61158 series Industrial communication networks - EN 61158 series
Fieldbus specifications - Part 1: Overview
and guidance for the IEC 61158 and IEC
61784 series
IEC 61298-1 2008 Process measurement and control devices EN 61298-1 2008
- General methods and procedures for
evaluating performance -- Part 1: General
considerations
IEC 61298-4 2008 Process measurement and control devices EN 61298-4 2008
- General methods and procedures for
evaluating performance -- Part 4:
Evaluation report content
IEC 61499 series Function blocks -- Part 1: Architecture EN 61499 series
IEC 61508 series Functional safety of EN 61508 series
electrical/electronic/programmable
electronic safety-related systems -- Part 1:
General requirements
IEC 61511 series Functional safety - Safety instrumented EN 61511 series
systems for the process industry sector -
Part 1: Framework, definitions, system,
hardware and application programming
requirements
IEC 61784-1 -  Industrial communication networks - EN 61784-1 -
Profiles -- Part 1: Fieldbus profiles
IEC 61784-2 -  Industrial communication networks - EN 61784-2 -
Profiles - Part 2: Additional fieldbus profiles
for real-time networks based on ISO/IEC
8802-3
IEC 61784-5 series Industrial communication networks - EN 61784-5 series
Profiles -- Part 5-1: Installation of
fieldbuses - Installation profiles for CPF 1
IEC 61804-2 -  Function Blocks (FB) for process control -- EN 61804-2 -
Part 2: Specification of FB concept
IEC 61918 -  Industrial communication networks - EN 61918 -
Installation of communication networks in
industrial premises
IEC 61987-11 2016 Industrial-process measurement and EN 61987-11 2017
control - Data structures and elements in
process equipment catalogues - Part 11:
List of Properties (LOP) of measuring
equipment for electronic data exchange -
Generic structures
IEC 62061 2005  Safety of machinery - Functional safety of EN 62061 2005
safety-related electrical, electronic and
programmable electronic control systems
  +EN 2010
62061:2005/corrige
ndum Feb. 2010
IEC 62262 2002 Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62381 2012 Automation systems in the process EN 62381 2012
industry - Factory acceptance test (FAT),
site acceptance test (SAT) and site
integration test (SIT)
4

---------------------- Page: 6 ----------------------
SIST EN IEC 62828-1:2018
EN IEC 62828-1:2018 (E)

ISO/IEC Guide 98- 2008 Uncertainty of measurement - Part 3: - -
3 Guide to the expression of uncertainty in
measurement (GUM:1995)
ISO/IEC Guide 99 2007 International vocabulary of metrology - - -
Basic and general concepts and
associated terms (VIM)

5

---------------------- Page: 7 ----------------------
SIST EN IEC 62828-1:2018

---------------------- Page: 8 ----------------------
SIST EN IEC 62828-1:2018




IEC 62828-1

®


Edition 1.0 2017-11




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Reference conditions and procedures for testing industrial and process

measurement transmitters –

Part 1: General procedures for all types of transmitters




Conditions de référence et procédures pour l’essai des transmetteurs de

mesure industrielle et de processus –


Partie 1: Procédures générales pour tous les types de transmetteurs












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 17.020; 25.040.40 ISBN 978-2-8322-5018-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 9 ----------------------
SIST EN IEC 62828-1:2018
– 2 – IEC 62828-1:2017 © IEC 2017
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviated terms . 11
3.1 Terms and definitions . 11
3.1.1 Terms related to accuracy . 11
3.1.2 Terms related to the uncertainty . 16
3.1.3 Terms regarding operation and practical installation . 17
3.1.4 Terms related to test procedures . 19
3.2 Abbreviated terms . 19
3.3 Reference to CDD . 19
4 General description of the PMT . 20
5 Reference test conditions . 20
5.1 General . 20
5.2 Standard reference test conditions . 21
5.2.1 General . 21
5.2.2 Environmental test conditions . 21
5.2.3 Power supply conditions . 21
5.2.4 Load conditions . 21
5.2.5 Mounting positions . 21
5.3 Reference test conditions for ambient and process quantities influencing
operation . 22
5.3.1 General . 22
5.3.2 Process conditions . 22
5.3.3 Environmental atmospheric conditions . 22
5.3.4 Mechanical vibration . 23
5.3.5 Shock, drop and topple . 24
5.3.6 Power supply . 24
5.3.7 Electromagnetic compatibility (EMC) . 24
5.4 Reference design criteria . 25
5.4.1 General . 25
5.4.2 Enclosure protection against solid, liquid (IP) and impact (IK) . 25
5.4.3 Enclosure protection against corrosive and erosive influences . 25
5.4.4 Electrical safety (insulation resistance, dielectric strength) . 25
5.4.5 Hazardous environment (for application in explosive atmosphere) . 25
5.4.6 Functional safety . 25
6 Test procedures . 25
6.1 General . 25
6.1.1 Overview . 25
6.1.2 Classification of the tests . 26
6.1.3 Preparation of the tests . 27
6.1.4 Preliminary assessment . 28
6.2 Type tests at standard reference test conditions . 35
6.2.1 General . 35
6.2.2 Accuracy and related factors . 35

---------------------- Page: 10 ----------------------
SIST EN IEC 62828-1:2018
IEC 62828-1:2017 © IEC 2017 – 3 –
6.2.3 Static behaviour . 41
6.2.4 Dynamic behaviour . 44
6.3 Type tests at operating reference test conditions . 49
6.3.1 General . 49
6.3.2 Ambient temperature effects . 49
6.3.3 Ambient relative humidity effects . 50
6.3.4 Vibration effects . 51
6.3.5 Shock, drop and topple . 53
6.3.6 Accelerated operational life test . 53
6.3.7 EMC tests . 53
6.3.8 Further test procedures . 54
6.3.9 Additional tests for digital transmitters . 54
6.4 Routine tests. 56
6.5 Acceptance, integration, periodic and maintenance tests . 56
6.5.1 General . 56
6.5.2 Periodical verification . 56
6.5.3 Periodical calibration . 56
7 Test report and technical documentation . 56
7.1 Test report . 56
7.2 Technical documentation . 57
7.3 Total probable error . 57
Annex A (informative) General description of a PMT . 58
A.1 General description of a PMT . 58
A.2 Sensor subsystem . 60
A.3 Data processing . 60
A.4 Output subsystem . 60
A.5 Human interface . 60
A.6 External system interface . 61
A.7 Power supply assembly . 61
Annex B (informative) Tests at the standard reference conditions . 62
Annex C (informative) Tests at ambient and process reference conditions for influence
quantities . 63
Annex D (informative) Function block testing . 64
D.1 General . 64
D.2 General qualitative checks . 64
D.3 Time-dependent function blocks . 64
D.4 Time-independent function blocks . 64
Annex E (informative) Measurement uncertainty . 65
E.1 Example of determination of the measurement uncertainty . 65
E.2 Single values influencing the uncertainty measurement . 65
E.3 Estimation of standard measurement uncertainty (u) . 65
E.4 Combined standard measurement uncertainty (u ) . 65
c
E.5 Expanded measurement uncertainty (U) . 65
Annex F (informative) Dependability testing method . 66
F.1 General . 66
F.2 Design analysis. 66
F.3 Reference conditions . 66
F.4 Fault injection test for internal PMT failures . 68

---------------------- Page: 11 ----------------------
SIST EN IEC 62828-1:2018
– 4 – IEC 62828-1:2017 © IEC 2017
F.5 Observations . 69
F.5.1 General . 69
F.5.2 Reporting and ranking of fault behaviour . 69
F.6 Human faults . 71
F.6.1 Mis-operation test . 71
F.6.2 Maintenance error test . 71
F.6.3 Expectations and reporting . 72
Annex G (informative) Throughput testing for digital PMT . 73
G.1 General . 73
G.2 PMT throughput in stand-alone conditions . 74
G.2.1 Reference conditions . 74
G.2.2 Test conditions . 74
G.2.3 Observations and measurements . 74
G.3 Throughput in a fieldbus configuration . 75
G.3.1 Reference conditions . 75
G.3.2 Test conditions . 75
G.3.3 Observations and measurements . 76
G.3.4 Precautions . 76
Annex H (informative) FAT, SAT and SIT . 77
H.1 General . 77
H.2 Factory acceptance tests FAT (accuracy measurement and others) . 77
H.3 Site acceptance tests SAT (visual inspection and calibration test). 77
H.4 Site integration tests SIT (additional test for communications) . 77
Annex I (informative) Technical documentation . 78
I.1 General . 78
I.2 Technical datasheet . 78
I.3 User manual . 81
I.4 Safety manual . 81
I.5 Commissioning, periodic and maintenance tests . 81
I.5.1 General . 81
I.5.2 Storage conditions . 81
I.5.3 Transportation conditions . 81
I.5.4 Mounting position . 81
I.5.5 Process connections . 82
I.5.6 Mechanical connections . 82
I.5.7 Output connections . 82
I.6 EC declaration of conformity . 82
I.7 Certificates for application in hazardous area . 82
I.8 Calibration certificates . 82
I.9 Spare parts list . 82
I.10 Marking . 82
Annex J (informative) Total Probable Error calculation . 83
Bibliography . 84

Figure 1 – Example of limit operation region in terms of output load resistance versus
supply voltage . 18
Figure 2 – Block diagram of a generic PMT . 20
Figure 3 – Error curves corresponding to the example of Table 17 . 39

---------------------- Page: 12 ----------------------
SIST EN IEC 62828-1:2018
IEC 62828-1:2017 © IEC 2017 – 5 –
Figure 4 – Example of responses to a step input with overshoot . 45
Figure 5 – Example of responses to a step input without overshoot . 46
Figure 6 – Example 1 of frequency response . 47
Figure 7 – Example 2 of frequency response . 48
Figure 8 – Example of diagram of the compensation options . 50
Figure 9 – Levels of device compatibility from IEC 61804-2 . 55
F
...

SLOVENSKI STANDARD
SIST EN 62828-1:2018
01-junij-2018
5HIHUHQþQLSRJRMLLQSRVWRSNL]DSUHVNXãDQMHLQGXVWULMVNLKLQSURFHVQLKPHULOQLK
RGGDMQLNRYGHO6SORãQLSRVWRSNL]DYVHYUVWHRGGDMQLNRY,(&
Reference conditions and procedures for testing industrial and process measurement
transmitters - Part 1: General procedures for all types of transmitters (IEC 62828-1:2017)
Referenzbedingungen und Testmethoden für Industrie- und
Prozessmessgrößenumformer - Teil 1: Allgemeine Testmethoden für alle Arten von
Messumformern (IEC 62828-1:2017)
Conditions de référence et procédures pour l'essai des transmetteurs de mesure
industrielle et de processus - Partie 1: Procédures générales pour tous les types de
transmetteurs (IEC 62828-1:2017)
Ta slovenski standard je istoveten z: EN IEC 62828-1:2018
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
SIST EN 62828-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62828-1:2018

---------------------- Page: 2 ----------------------

SIST EN 62828-1:2018


EUROPEAN STANDARD EN IEC 62828-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2018
ICS 17.020; 25.040.40

English Version
Reference conditions and procedures for testing industrial and
process measurement transmitters - Part 1: General procedures
for all types of transmitters
(IEC 62828-1:2017)
Conditions de référence et procédures pour l'essai des Referenzbedingungen und Testmethoden für Industrie- und
transmetteurs de mesure industrielle et de processus - Prozessmessgrößenumformer - Teil 1: Allgemeine
Partie 1: Procédures générales pour tous les types de Testmethoden für alle Arten von Messumformern
transmetteurs (IEC 62828-1:2017)
(IEC 62828-1:2017)
This European Standard was approved by CENELEC on 2017-12-15. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62828-1:2018 E

---------------------- Page: 3 ----------------------

SIST EN 62828-1:2018
EN IEC 62828-1:2018 (E)

European foreword
The text of document 65B/1100/FDIS, future edition 1 of IEC 62828-1, prepared by IEC/TC 65B
"Measurement and control devices, of IEC technical committee 65: Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62828-1:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-09-15
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2020-12-15
• latest date by which the national
standards conflicting with the
document have to be withdrawn

EN IEC 62828 (series) supersedes EN 60770 (series).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62828-1:2017 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61360-4:2005 DB NOTE Harmonized as EN 61360-4:2005 (not modified)
corrigendum Dec. 2005.
IEC 61987-14:2016 NOTE Harmonized as EN 61987-14:2016 (not modified).
IEC 62382:2012 NOTE Harmonized as EN 62382:2013 (not modified).
CISPR 11:2015 NOTE Harmonized as EN 55011:2016 (modified).


2

---------------------- Page: 4 ----------------------

SIST EN 62828-1:2018
EN IEC 62828-1:2018 (E)

Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.

NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60068-2-1 -  Environmental testing -- Part 2-1: Tests - EN 60068-2-1 -
Test A: Cold
IEC 60068-2-2 -  Environmental testing -- Part 2-2: Tests - EN 60068-2-2 -
Test B: Dry heat
IEC 60068-2-6 -  Environmental testing -- Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-27 -  Environmental testing -- Part 2-27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60068-2-31 -  Environmental testing -- Part 2-31: Tests - EN 60068-2-31 -
Test Ec: Rough handling shocks, primarily
for equipment-type specimens
IEC 60068-2-78 -  Environmental testing -- Part 2-78: Tests - EN 60068-2-78 -
Test Cab: Damp heat, steady state
IEC 60079-10 series Electrical apparatus for explosive gas EN 60079-10 series
atmospheres -- Part 10: Classification of
hazardous areas
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code)
  +EN 1993
60529:1991/corrige
ndum May 1993
IEC 60529 AMD 1 1999 Degrees of protection provided by - -
enclosures (IP_code); Amendment_1
IEC 60529 AMD 2 2013 Degrees of protection provided by - -
enclosures (IP_code); Amendment_2
IEC 60654-1 1993 Industrial-process measurement and EN 60654-1 1993
control equipment - Operating conditions --
Part 1: Climatic conditions
IEC 60654-3 1983 Operating conditions for industrial-process EN 60654-3 1997
measurement and control equipment --
Part 3: Mechanical influences
IEC 60654-4 1987 Operating conditions for industrial-process EN 60654-4 1997
measurement and control equipment --
Part 4: Corrosive and erosive influences
IEC 60721-3-1 -  Classification of environmental conditions - EN 60721-3-1 -
- Part 3: Classification of groups of
environmental parameters and their
severities -- Section 1: Storage
IEC 60721-3-2 -  Classification of environmental conditions - EN 60721-3-2 -
- Part 3: Classification of groups of
environmental parameters and their
severities -- Section 2: Transportation
3

---------------------- Page: 5 ----------------------

SIST EN 62828-1:2018
EN IEC 62828-1:2018 (E)

IEC 61010-1 2010 Safety requirements for electrical EN 61010-1 2010
equipment for measurement, control and
laboratory use -- Part 1: General
requirements
IEC 61158 series Industrial communication networks - EN 61158 series
Fieldbus specifications - Part 1: Overview
and guidance for the IEC 61158 and IEC
61784 series
IEC 61298-1 2008 Process measurement and control devices EN 61298-1 2008
- General methods and procedures for
evaluating performance -- Part 1: General
considerations
IEC 61298-4 2008 Process measurement and control devices EN 61298-4 2008
- General methods and procedures for
evaluating performance -- Part 4:
Evaluation report content
IEC 61499 series Function blocks -- Part 1: Architecture EN 61499 series
IEC 61508 series Functional safety of EN 61508 series
electrical/electronic/programmable
electronic safety-related systems -- Part 1:
General requirements
IEC 61511 series Functional safety - Safety instrumented EN 61511 series
systems for the process industry sector -
Part 1: Framework, definitions, system,
hardware and application programming
requirements
IEC 61784-1 -  Industrial communication networks - EN 61784-1 -
Profiles -- Part 1: Fieldbus profiles
IEC 61784-2 -  Industrial communication networks - EN 61784-2 -
Profiles - Part 2: Additional fieldbus profiles
for real-time networks based on ISO/IEC
8802-3
IEC 61784-5 series Industrial communication networks - EN 61784-5 series
Profiles -- Part 5-1: Installation of
fieldbuses - Installation profiles for CPF 1
IEC 61804-2 -  Function Blocks (FB) for process control -- EN 61804-2 -
Part 2: Specification of FB concept
IEC 61918 -  Industrial communication networks - EN 61918 -
Installation of communication networks in
industrial premises
IEC 61987-11 2016 Industrial-process measurement and EN 61987-11 2017
control - Data structures and elements in
process equipment catalogues - Part 11:
List of Properties (LOP) of measuring
equipment for electronic data exchange -
Generic structures
IEC 62061 2005  Safety of machinery - Functional safety of EN 62061 2005
safety-related electrical, electronic and
programmable electronic control systems
  +EN 2010
62061:2005/corrige
ndum Feb. 2010
IEC 62262 2002 Degrees of protection provided by EN 62262 2002
enclosures for electrical equipment against
external mechanical impacts (IK code)
IEC 62381 2012 Automation systems in the process EN 62381 2012
industry - Factory acceptance test (FAT),
site acceptance test (SAT) and site
integration test (SIT)
4

---------------------- Page: 6 ----------------------

SIST EN 62828-1:2018
EN IEC 62828-1:2018 (E)

ISO/IEC Guide 98- 2008 Uncertainty of measurement - Part 3: - -
3 Guide to the expression of uncertainty in
measurement (GUM:1995)
ISO/IEC Guide 99 2007 International vocabulary of metrology - - -
Basic and general concepts and
associated terms (VIM)

5

---------------------- Page: 7 ----------------------

SIST EN 62828-1:2018

---------------------- Page: 8 ----------------------

SIST EN 62828-1:2018




IEC 62828-1

®


Edition 1.0 2017-11




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Reference conditions and procedures for testing industrial and process

measurement transmitters –

Part 1: General procedures for all types of transmitters




Conditions de référence et procédures pour l’essai des transmetteurs de

mesure industrielle et de processus –


Partie 1: Procédures générales pour tous les types de transmetteurs












INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 17.020; 25.040.40 ISBN 978-2-8322-5018-1



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 9 ----------------------

SIST EN 62828-1:2018
– 2 – IEC 62828-1:2017 © IEC 2017
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviated terms . 11
3.1 Terms and definitions . 11
3.1.1 Terms related to accuracy . 11
3.1.2 Terms related to the uncertainty . 16
3.1.3 Terms regarding operation and practical installation . 17
3.1.4 Terms related to test procedures . 19
3.2 Abbreviated terms . 19
3.3 Reference to CDD . 19
4 General description of the PMT . 20
5 Reference test conditions . 20
5.1 General . 20
5.2 Standard reference test conditions . 21
5.2.1 General . 21
5.2.2 Environmental test conditions . 21
5.2.3 Power supply conditions . 21
5.2.4 Load conditions . 21
5.2.5 Mounting positions . 21
5.3 Reference test conditions for ambient and process quantities influencing
operation . 22
5.3.1 General . 22
5.3.2 Process conditions . 22
5.3.3 Environmental atmospheric conditions . 22
5.3.4 Mechanical vibration . 23
5.3.5 Shock, drop and topple . 24
5.3.6 Power supply . 24
5.3.7 Electromagnetic compatibility (EMC) . 24
5.4 Reference design criteria . 25
5.4.1 General . 25
5.4.2 Enclosure protection against solid, liquid (IP) and impact (IK) . 25
5.4.3 Enclosure protection against corrosive and erosive influences . 25
5.4.4 Electrical safety (insulation resistance, dielectric strength) . 25
5.4.5 Hazardous environment (for application in explosive atmosphere) . 25
5.4.6 Functional safety . 25
6 Test procedures . 25
6.1 General . 25
6.1.1 Overview . 25
6.1.2 Classification of the tests . 26
6.1.3 Preparation of the tests . 27
6.1.4 Preliminary assessment . 28
6.2 Type tests at standard reference test conditions . 35
6.2.1 General . 35
6.2.2 Accuracy and related factors . 35

---------------------- Page: 10 ----------------------

SIST EN 62828-1:2018
IEC 62828-1:2017 © IEC 2017 – 3 –
6.2.3 Static behaviour . 41
6.2.4 Dynamic behaviour . 44
6.3 Type tests at operating reference test conditions . 49
6.3.1 General . 49
6.3.2 Ambient temperature effects . 49
6.3.3 Ambient relative humidity effects . 50
6.3.4 Vibration effects . 51
6.3.5 Shock, drop and topple . 53
6.3.6 Accelerated operational life test . 53
6.3.7 EMC tests . 53
6.3.8 Further test procedures . 54
6.3.9 Additional tests for digital transmitters . 54
6.4 Routine tests. 56
6.5 Acceptance, integration, periodic and maintenance tests . 56
6.5.1 General . 56
6.5.2 Periodical verification . 56
6.5.3 Periodical calibration . 56
7 Test report and technical documentation . 56
7.1 Test report . 56
7.2 Technical documentation . 57
7.3 Total probable error . 57
Annex A (informative) General description of a PMT . 58
A.1 General description of a PMT . 58
A.2 Sensor subsystem . 60
A.3 Data processing . 60
A.4 Output subsystem . 60
A.5 Human interface . 60
A.6 External system interface . 61
A.7 Power supply assembly . 61
Annex B (informative) Tests at the standard reference conditions . 62
Annex C (informative) Tests at ambient and process reference conditions for influence
quantities . 63
Annex D (informative) Function block testing . 64
D.1 General . 64
D.2 General qualitative checks . 64
D.3 Time-dependent function blocks . 64
D.4 Time-independent function blocks . 64
Annex E (informative) Measurement uncertainty . 65
E.1 Example of determination of the measurement uncertainty . 65
E.2 Single values influencing the uncertainty measurement . 65
E.3 Estimation of standard measurement uncertainty (u) . 65
E.4 Combined standard measurement uncertainty (u ) . 65
c
E.5 Expanded measurement uncertainty (U) . 65
Annex F (informative) Dependability testing method . 66
F.1 General . 66
F.2 Design analysis. 66
F.3 Reference conditions . 66
F.4 Fault injection test for internal PMT failures . 68

---------------------- Page: 11 ----------------------

SIST EN 62828-1:2018
– 4 – IEC 62828-1:2017 © IEC 2017
F.5 Observations . 69
F.5.1 General . 69
F.5.2 Reporting and ranking of fault behaviour . 69
F.6 Human faults . 71
F.6.1 Mis-operation test . 71
F.6.2 Maintenance error test . 71
F.6.3 Expectations and reporting . 72
Annex G (informative) Throughput testing for digital PMT . 73
G.1 General . 73
G.2 PMT throughput in stand-alone conditions . 74
G.2.1 Reference conditions . 74
G.2.2 Test conditions . 74
G.2.3 Observations and measurements . 74
G.3 Throughput in a fieldbus configuration . 75
G.3.1 Reference conditions . 75
G.3.2 Test conditions . 75
G.3.3 Observations and measurements . 76
G.3.4 Precautions . 76
Annex H (informative) FAT, SAT and SIT . 77
H.1 General . 77
H.2 Factory acceptance tests FAT (accuracy measurement and others) . 77
H.3 Site acceptance tests SAT (visual inspection and calibration test). 77
H.4 Site integration tests SIT (additional test for communications) . 77
Annex I (informative) Technical documentation . 78
I.1 General . 78
I.2 Technical datasheet . 78
I.3 User manual . 81
I.4 Safety manual . 81
I.5 Commissioning, periodic and maintenance tests . 81
I.5.1 General . 81
I.5.2 Storage conditions . 81
I.5.3 Transportation conditions . 81
I.5.4 Mounting position . 81
I.5.5 Process connections . 82
I.5.6 Mechanical connections . 82
I.5.7 Output connections . 82
I.6 EC declaration of conformity . 82
I.7 Certificates for application in hazardous area . 82
I.8 Calibration certificates . 82
I.9 Spare parts list . 82
I.10 Marking . 82
Annex J (informative) Total Probable Error calculation . 83
Bibliography . 84

Figure 1 – Example of limit operation region in terms of output load resistance versus
supply voltage . 18
Figure 2 – Block diagram of a generic PMT . 20
Figure 3 – Error curves corresponding to the example of Table 17 . 39

---------------------- Page: 12 ----------------------

SIST EN 62828-1:2018
IEC 62828-1:2017 © IEC 2017 – 5 –
Figure 4 – Example of responses to a step input with overshoot . 45
Figure 5 – Example of responses to a step input without overshoot . 46
Figure 6 – Example 1 of frequency response . 47
Figure 7 – Example 2 of frequency response . 48
Figure 8 – Example of diagram of the compensation options . 50
Figure 9 – Levels of device compatibility from IEC 61804-2 . 55
Figure A.1 – Schematic block diagra
...