SIST EN 61834-4:1999
(Main)Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 4: Pack header table and contents
Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 4: Pack header table and contents
Specifies the pack headers and the contents of packs which are applicable to the whole recording system of helical-scan digital video cassette using 6,35 mm magnetic tape.
Aufzeichnung - Videokassettensystem mit digitaler Schrägspuraufzeichnung auf Magnetband 6,35 mm für den Heimgebrauch (Systeme 525-60, 625-50, 1125-60 und 1250-50) -- Teil 4: Datenpakete - Übersicht und Inhalt
Enregistrement - Système d'enregistrement numérique grand public vidéo à cassette à balayage hélicoïdal pour la bande magnétique de 6,35 mm (systèmes 525-60,625-5O,1125-60 et 1250-50 -- Partie 4: Tableaux des paquets en-tête et leur contenu
Spécifie les en-tête des paquets et leur contenu applicables à l'ensemble du magnétoscope numériques à cassette à balayage hélicoïdal utilisant la bande magnétique de 6,35 mm.
Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part 4: Pack header table and contents (IEC 61834-4:1998)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61834-4:1999
01-april-1999
Recording - Helical-scan digital video cassette recording system using 6,35 mm
magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) --
Part 4: Pack header table and contents (IEC 61834-4:1998)
Recording - Helical-scan digital video cassette recording system using 6,35 mm
magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -- Part
4: Pack header table and contents
Aufzeichnung - Videokassettensystem mit digitaler Schrägspuraufzeichnung auf
Magnetband 6,35 mm für den Heimgebrauch (Systeme 525-60, 625-50, 1125-60 und
1250-50) -- Teil 4: Datenpakete - Übersicht und Inhalt
Enregistrement - Système d'enregistrement numérique grand public vidéo à cassette à
balayage hélicoïdal pour la bande magnétique de 6,35 mm (systèmes 525-60,625-
5O,1125-60 et 1250-50 -- Partie 4: Tableaux des paquets en-tête et leur contenu
Ta slovenski standard je istoveten z: EN 61834-4:1998
ICS:
33.160.40 Video sistemi Video systems
SIST EN 61834-4:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
INTERNATIONAL
IEC
STANDARD
61834-4
First edition
1998-07
Recording –
Helical-scan digital video cassette recording system
using 6,35 mm magnetic tape for consumer use
(525-60, 625-50, 1125-60 and 1250-50 systems) –
Part 4:
Pack header table and contents
Enregistrement –
Système d’enregistrement grand public vidéo à cassette
à défilement hélicoïdal pour bande magnétique de 6,35 mm
(systèmes 525-60, 625-50, 1125-60 et 1250-50)
Partie 4:
Tableaux des paquets en-tête et leur contenu
IEC 1998 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
Commission Electrotechnique Internationale
PRICE CODE
XJ
International Electrotechnical Commission
For price, see current catalogue
---------------------- Page: 2 ----------------------
– 2 – 61834-4 © IEC:1998 (E)
CONTENTS
Page
FOREWORD . 6
Clause
1 General. 8
1.1 Scope. 8
1.2 Normative references. 8
1.3 Labelling convention. 8
2 Pack header table . 9
3 CONTROL. 11
3.1 CASSETTE ID. 11
3.2 TAPE LENGTH. 12
3.3 TIMER ACT DATE (Timer activation date) . 13
3.4 TIMER ACT S/S (Timer activation start/stop) . 17
3.5 PR START POINT (Playback or recording start point). 18
3.6 PR START POINT (Playback or recording start point). 19
3.7 TAG ID NO. / GENRE . 20
3.8 TOPIC/PAGE HEADER. 27
3.9 TEXT HEADER. 29
3.10 TEXT. 32
3.11 TAG. 33
3.12 TAG. 34
3.13 TELETEXT INFO (Teletext information). 36
3.14 KEY. 38
3.15 ZONE END. 39
3.16 ZONE END. 40
4 TITLE. 42
4.1 TOTAL TIME. 42
4.2 REMAIN TIME. 43
4.3 CHAPTER TOTAL NO. . 44
4.4 TIME CODE. 45
4.5 BINARY GROUP. 47
4.6 CASSETTE NO. . 47
4.7 SOFT ID. 48
4.8 SOFT ID. 49
4.9 TEXT HEADER. 50
4.10 TEXT. 51
4.11 TITLE START. 52
4.12 TITLE START. 53
4.13 REEL ID. 54
4.14 REEL ID. 54
4.15 TITLE END. 55
4.16 TITLE END. 56
---------------------- Page: 3 ----------------------
61834-4 © IEC:1998 (E) – 3 –
Clause Page
5 CHAPTER. 57
5.1 TOTAL TIME. 57
5.2 REMAIN TIME. 58
5.3 CHAPTER NO. . 59
5.4 TIME CODE. 60
5.5 BINARY GROUP. 61
5.6 Reserved. 61
5.7 Reserved. 62
5.8 Reserved. 62
5.9 TEXT HEADER. 63
5.10 TEXT. 64
5.11 CHAPTER START. 65
5.12 CHAPTER START. 66
5.13 Reserved. 67
5.14 Reserved. 67
5.15 CHAPTER END. 68
5.16 CHAPTER END. 69
6 PART. 70
6.1 TOTAL TIME. 70
6.2 REMAIN TIME. 71
6.3 PART NO. . 72
6.4 TIME CODE. 73
6.5 BINARY GROUP. 74
6.6 Reserved. 74
6.7 Reserved. 75
6.8 Reserved. 75
6.9 TEXT HEADER. 76
6.10 TEXT. 77
6.11 PART START. 78
6.12 PART START. 79
6.13 Reserved. 80
6.14 Reserved. 80
6.15 PART END. 81
6.16 PART END. 82
7 PROGRAMME. 83
7.1 TOTAL TIME. 83
7.2 REMAIN TIME. 84
7.3 REC DTIME (REC DATE/TIME). 85
7.4 TIME CODE. 87
7.5 BINARY GROUP. 88
7.6 Reserved. 88
7.7 Reserved. 89
7.8 Reserved. 89
7.9 TEXT HEADER. 90
---------------------- Page: 4 ----------------------
– 4 – 61834-4 © IEC:1998 (E)
Clause Page
7.10 TEXT. 91
7.11 PROGRAMME START. 92
7.12 PROGRAMME START. 93
7.13 Reserved. 94
7.14 Reserved. 94
7.15 PROGRAMME END. 95
7.16 PROGRAMME END. 96
8 AAUX. 97
8.1 SOURCE. 97
8.2 SOURCE CONTROL. 101
8.3 REC DATE. 104
8.4 REC TIME. 105
8.5 BINARY GROUP. 106
8.6 CLOSED CAPTION. 107
8.7 TR (Transparent). 108
8.8 Reserved. 108
8.9 TEXT HEADER. 109
8.10 TEXT. 110
8.11 AAUX START. 111
8.12 AAUX START. 112
8.13 Reserved. 113
8.14 Reserved. 113
8.15 AAUX END. 114
8.16 AAUX END. 115
9 VAUX. 116
9.1 SOURCE. 116
9.2 SOURCE CONTROL. 120
9.3 REC DATE (Recording date) . 130
9.4 REC TIME. 132
9.5 BINARY GROUP. 133
9.6 CLOSED CAPTION. 133
9.7 TR (Transparent). 134
9.8 TELETEXT. 135
9.9 TEXT HEADER. 137
9.10 TEXT. 138
9.11 VAUX START. 139
9.12 VAUX START. 140
9.13 MARINE/MOUNTAIN. 141
9.14 LONGITUDE/LATITUDE. 144
9.15 VAUX END. 146
9.16 VAUX END. 147
---------------------- Page: 5 ----------------------
61834-4 © IEC:1998 (E) – 5 –
Clause Page
10 CAMERA. 148
10.1 CONSUMER CAMERA 1 . 148
10.2 CONSUMER CAMERA 2 . 150
10.3 Reserved. 152
10.4 LENS. 153
10.5 GAIN. 154
10.6 PEDESTAL. 155
10.7 GAMMA. 156
10.8 DETAIL. 157
10.9 TEXT HEADER. 158
10.10 TEXT. 159
10.11 Reserved. 159
10.12 CAMERA PRESET. 160
10.13 FLARE. 162
10.14 SHADING. 163
10.15 KNEE. 165
10.16 SHUTTER. 166
11 LINE. 167
11.1 LINE HEADER. 167
11.2 Y. 171
11.3 CR. 171
11.4 CB. 172
11.5 Reserved. 172
11.6 Reserved. 173
11.7 Reserved. 173
11.8 Reserved. 174
11.9 TEXT HEADER. 175
11.10 TEXT. 176
11.11 LINE START. 177
11.12 LINE START. 178
11.13 Reserved. 179
11.14 Reserved. 179
11.15 LINE END. 180
11.16 LINE END . 181
12 SOFT MODE. 182
12.1 MAKER CODE. 182
12.2 OPTION. 182
12.3 OPTION. 183
12.4 OPTION. 183
12.5 OPTION. 184
12.6 OPTION. 184
12.7 OPTION. 185
12.8 OPTION. 185
12.9 OPTION. 186
12.10 OPTION. 186
12.11 OPTION. 187
12.12 OPTION. 187
12.13 OPTION. 188
12.14 OPTION. 188
12.15 OPTION. 189
12.16 NO INFO: No information . 189
---------------------- Page: 6 ----------------------
– 6 – 61834-4 © IEC:1998 (E)
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
RECORDING – HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING
SYSTEM USING 6,35 mm MAGNETIC TAPE FOR CONSUMER USE
(525-60, 625-50, 1125-60 and 1250-50 systems) –
Part 4: Pack header table and contents
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61834-4 has been prepared by subcomittee 100B: Audio, video and
multimedia information storage systems, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
100B/164/FDIS 100B/174/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
---------------------- Page: 7 ----------------------
61834-4 © IEC:1998 (E) – 7 –
IEC 61834 consists of the following parts:
– Part 1: General specifications;
– Part 2: SD format for 525-60 and 625-50 systems;
– Part 3: HD format for 1125-60 and 1250-50 systems;
– Part 4: Pack header table and contents;
– Part 5: Character information system.
This document is Part 4 of IEC 61834 and describes the pack header table and the contents of
packs which are applicable to the whole recording system of helical-scan digital video cassette.
Part 1 describes the common specifications for the helical-scan digital video cassette recording
system using 6,35 mm magnetic tape.
Part 2 describes the specifications for 525-60 and 625-50 systems which are not included in
Part 1.
Part 3 describes the specifications for 1125-60 and 1250-50 systems which are not included in
Part 1 and Part 2.
Part 5 describes the character information system which is applicable to the whole recording
system of helical-scan digital video cassette.
For manufacturing SD digital video cassette recording system, Part 1, Part 2, Part 4 and Part 5
are referred to.
For manufacturing HD digital video cassette recording system, Part 1, Part 2, Part 3, Part 4
and Part 5 are referred to.
This part of IEC 61834 is to be referred to particularly when the pack header table and the
contents are to be checked.
A bilingual version of this standard may be issued at a later date.
---------------------- Page: 8 ----------------------
– 8 – 61834-4 © IEC:1998 (E)
RECORDING – HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING
SYSTEM USING 6,35 mm MAGNETIC TAPE FOR CONSUMER USE
(525-60, 625-50, 1125-60 and 1250-50 systems) –
Part 4: Pack header table and contents
1 General
1.1 Scope
This part of IEC 61834 specifies the pack headers and the contents of packs which are
applicable to the whole recording system of helical-scan digital video cassette using 6,35 mm
magnetic tape.
1.2 Normative references
The following normative documents contain provisions which, through reference in this text,
constitute provisions of this part of IEC 61834. For dated references subsequent amendments
to, or revisions of, any of these publications do not apply. However, parties to agreements
based on this part of IEC 61834 are encouraged to investigate the possibility of applying the
most recent editions of the normative documents indicated below. For undated references, the
latest edition of the normative document referred to applies. Members of IEC and ISO maintain
registers of currently valid International Standards.
IEC 61880:1998, Video systems (525/60) – Video and accompanied data using the vertical
blanking interval – Analogue interface
1)
ISO/IEC 2022:1994, Information technology – Character code structure and extension techniques
ISO 3166:1993, Codes for the representation of names of countries
ISO 3901:1986, Documentation – International Standard Recording Code (ISRC)
EBU SPB 492:1992, Teletext Specifications
EIA 608:1993: Recommended Practice for Line 21 Data Service
ETS 300 294:1996, Television systems; 625 line television Wide Screen Signalling (WSS)
ITU-R Report 624-4:1990, Characteristics of television systems
ITU-R Recommendation BT653-2:1993, Teletext systems
1.3 Labelling convention
Byte values are expressed in binary coded decimal notation unless otherwise noted.
An "h" subscript indicates hexadecimal value. A "b" subscript indicates binary value.
___________
1)
To be published.
---------------------- Page: 9 ----------------------
6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.