SIST EN 1559-3:2011
(Main)Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
This European Standard applies to castings made from all cast iron materials produced in sand or permanent moulds or by centrifugal casting, continuous casting or investment casting. It specifies the additional technical conditions for castings made from all cast iron materials. The document does not apply to iron products which are the subject of separate European product standards e.g. iron pipes, fittings and accessories for water pipelines which are subject of EN 545 and EN 598, EN 877 and EN 969.
Gießereiwesen - Technische Lieferbedingungen - Teil 3: Zusätzliche Anforderungen an Eisengussstücke
Diese Europäische Norm legt die zusätzlichen technischen Lieferbedingungen für Gussstücke aus allen Gusseisenwerkstoffen fest. Diese Europäische Norm gilt für Eisengussstücke, die in Sandformen oder Kokillen oder nach dem Schleudergieß-, Stranggieß- oder Feingießverfahren hergestellt werden.
Fonderie - Conditions techniques de fourniture - Partie 3: Spécifications complémentaires pour les pièces moulées en fonte
La présente Norme européenne spécifie les conditions techniques complémentaires de fourniture des pièces
moulées, élaborées à partir de tous les matériaux en fonte.
La présente Norme européenne s'applique aux pièces moulées, élaborées à partir de tous les matériaux en
fonte, coulées dans des moules en sable ou en coquille, ou par centrifugation, par coulée continue ou par
moulage en cire perdue.
Livarstvo - Tehnični dobavni pogoji - 3. del: Dodatne zahteve za litoželezne ulitke
Ta evropski standard velja za ulitke, narejene iz litoželeznih materialov v peščenih ali trajnih kalupih ali s centrifugalnim litjem, kontinuirnim litjem ali precizijskim litjem. Določa dodatne tehnične pogoje za ulitke, narejene iz litoželeznih materialov. Dokument ne velja za železne proizvode, ki so predmet ločenih evropskih standardov za proizvode, npr. železne cevi, fitingi in dodatki za vodne cevovode, ki so predmet EN 545 in EN 598, EN 877 in EN 969.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gießereiwesen - Technische Lieferbedingungen - Teil 3: Zusätzliche Anforderungen an EisengussstückeFonderie - Conditions techniques de fourniture - Partie 3: Spécifications complémentaires pour les pièces moulées en fonteFounding - Technical conditions of delivery - Part 3: Additional requirements for iron castings77.140.80Železni in jekleni ulitkiIron and steel castingsICS:Ta slovenski standard je istoveten z:EN 1559-3:2011SIST EN 1559-3:2011en,fr,de01-december-2011SIST EN 1559-3:2011SLOVENSKI
STANDARDSIST EN 1559-3:19981DGRPHãþD
SIST EN 1559-3:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1559-3
October 2011 ICS 77.140.80 Supersedes EN 1559-3:1997English Version
Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
Fonderie - Conditions techniques de fourniture - Partie 3: Spécifications complémentaires pour les pièces moulées en fonte
Gießereiwesen - Technische Lieferbedingungen - Teil 3: Zusätzliche Anforderungen an Eisengussstücke This European Standard was approved by CEN on 17 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1559-3:2011: ESIST EN 1559-3:2011
EN 1559-3:2011 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53≤ Terms and definitions .54Information to be supplied by the purchaser .64.1≤ Mandatory information .64.2Optional information.64.3≤ Drawings, patterns and tools .64.4≤ Information on the mass .64.5≤ Preliminary sample .64.6≤ Initial sample .65Designations .66Manufacture .66.1≤ Manufacturing process .66.2Welding operations.67Requirements .77.1≤ General .77.2Material .77.3Casting .78Inspection .88.1≤ General .88.2≤ Type of inspection documents and type of inspection .88.3Test unit .88.4≤ Samples .98.5≤ Test .98.6≤ Invalidation of tests .98.7≤ Retests .98.8≤ Sorting and reprocessing .99≤ Marking .910≤ Packaging and surface protection .911≤ Complaints .9Annex A (informative)
Guidelines for the specification of acceptance criteria for the outer and inner conditions (non-destructive testing) . 10Annex B (informative)
Guidelines for the specification of acceptance criteria for surface
condition (visual check) . 13Annex C (informative)
Significant technical changes between this European standard and the previous edition . 15Bibliography . 16 SIST EN 1559-3:2011
EN 1559-3:2011 (E) 3 Foreword This document (EN 1559-3:2011) has been prepared by Technical Committee CEN/TC 190 “Foundry technology”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2012, and conflicting national standards shall be withdrawn at the latest by April 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1559-3:1997. Within its programme of work, Technical Committee CEN/TC 190 requested CEN/TC 190/WG 1 "Technical conditions of delivery and cast iron designation" to revise the following standard: EN 1559-3, Founding — Technical conditions of delivery — Part 3: Additional requirements for iron castings Annex C provides details of significant technical changes between this European Standard and the previous edition. This standard is one of a series of European Standards for technical delivery conditions for castings. The other standards in this series are: EN 1559-1, Founding — Technical conditions of delivery — Part 1: General EN 1559-2, Founding — Technical conditions of delivery — Part 2: Additional requirements for steel castings EN 1559-4, Founding — Technical conditions of delivery — Part 4: Additional requirements for aluminium alloy castings EN 1559-5, Founding — Technical conditions of delivery — Part 5: Additional requirements for magnesium alloy castings EN 1559-6, Founding — Technical conditions of delivery — Part 6: Additional requirements for zinc alloy castings According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 1559-3:2011
EN 1559-3:2011 (E) 4 Introduction CEN/TC 190 "Foundry Technology" has prepared a series of material standards covering the following cast irons: grey cast irons [1]; malleable cast irons [2]; spheroidal graphite cast irons [3]; ausferritic spheroidal graphite cast irons [4]; abrasion resistant cast irons [5]; austenitic cast irons [7]; compacted (vermicular) graphite cast irons [8]; low alloyed ferritic spheroidal graphite cast irons for elevated temperature applications [9]. In order to assist manufacturers and purchasers to prepare proper contractual arrangements and prevent misunderstanding, CEN/TC 190 approved the preparation of a series of standards covering technical delivery conditions. These have been prepared as separate parts. This European Standard covers the additional technical delivery conditions for all the cast iron materials, e.g. optional information, manufacturing process, welding operation, additional requirements regarding the condition of the casting, test methods. This European Standard cannot be used alone for compiling a specification for ordering and supplying iron castings, but as a complement to EN 1559-1. The symbol ” against the clause reference indicates that the requirements of that clause of EN 1559-1 have to be met. SIST EN 1559-3:2011
EN 1559-3:2011 (E) 5 1 Scope This European Standard specifies the additional technical delivery conditions for castings made from all cast iron materials. This European Standard applies to iron castings produced in sand or permanent moulds or by centrifugal casting, continuous casting or investment casting. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-6, Qualification test of welders — Fusion Welding — Part 6: Cast iron EN 444, Non-destructive testing — General principles for radiographic examination of metallic materials by X- and gamma-rays EN 571-1, Non destructive testing — Penetrant testing — Part 1: General principles EN 583-1, Non-destructive testing — Ultrasonic examination — Part 1: General principles EN 1011-8, Welding — Recommendations for welding of metallic materials — Part 8: Welding of cast irons
prEN 1369, Founding — Magnetic particle testing EN 1370, Founding — Examination of surface condition EN 1371-1, Founding — Liquid penetrant testing — Part 1: Sand, gravity die and low pressure die castings EN 1559-1, Founding — Technical conditions of delivery — Part 1: General EN 1560, Founding — Designation system for cast iron — Material symbols and material numbers
EN 12680-3, Founding — Ultrasonic testing — Part 3: Spheroidal graphite cast iron castings EN 12681, Founding — Radiographic examination EN 14784-1, Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 1: Classification of systems EN 14784-2, Non-destructive testing — Industrial computed radiography with storage phosphor imaging plates — Part 2: General principles for testing of metallic materials using X-rays and gamma rays EN ISO 9934-1, Non-destructive testing — Magnetic particle testing — Part 1: General principles
(ISO 9934-1:2001) EN ISO 15614-3, Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 3: Fusion welding of non-alloyed and low-alloyed cast irons (ISO 15614-3:2008) 3 ≤ Terms and definitions For the purposes of this document, the terms and definitions given in EN 1559-1 and of the applicable material standard apply. SIST EN 1559-3:2011
EN 1559-3:2011 (E) 6 4 Information to be supplied by the purchaser 4.1 ≤ Mandatory information The relevant wall thickness shall be given in the order. 4.2 Optional informa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.