Electrical test methods for low voltage energy cables

EN 50395 contains electrical test methods required for the testing of harmonized low voltage energy
cables, especially those rated at up to and including 450/750 V.
NOTE 1 A description of the origin of these test methods and the background to this European Standard is given in the Introduction and in Annex B.
The particular cable standard dictates the tests which need to be performed on the relevant cable
type. It also specifies whether the specific test is a type test (T), a sample test (S) or a routine test (R) for the particular cable type.
NOTE 2 T, S and R are defined in the relevant cable standard.
The requirements to be met during or after the test are specified for the particular cable type in the
relevant cable standard. However, some test requirements are obvious and universal, such as the fact that no breakdown shall occur during voltage tests, and these are stated in the particular test method.
Test methods for use specifically in utility power cables are not covered by this European Standard.
They can be found in HD 605.
Test methods for use specifically in communications cables are the responsibility of the Technical
Committee CENELEC TC 46X, Communication cables. At present such test methods are given in
EN 50289 series.

Elektrische Prüfverfahren für Niederspannungskabel und -leitungen

Méthodes d'essais électriques pour les câbles d'énergie basse tension

Metode za preskušanje električnih lastnosti nizkonapetostnih energetskih kablov - Dopolnilo A1

EN 50395 vsebuje metode za preskušanje električnih lastnosti, potrebne za preskušanje harmoniziranih nizkonapetostnih energetskih kablov, predvsem tistih z nazivno napetostjo do vključno 450/750 V.
OPOMBA 1: Opis izvora teh preskusnih metod in ozadje tega evropskega standarda sta podana v uvodu in dodatku B.
Standard za določen kabel narekuje, katere preskuse je treba opraviti na ustrezni vrsti kabla.
Opredeljuje tudi, ali je pri neki vrsti kabla določen preskus tipski preskus (T), vzorčni preskus (S) ali rutinski preskus (R).
OPOMBA 2: T, S in R so opredeljeni v standardu za ustrezni kabel.
Zahteve, ki morajo biti izpolnjene med preskusom ali po njem, so opredeljene za določeno vrsto kabla v standardu za ustrezen kabel. Vendar pa so nekatere preskusne zahteve očitne in univerzalne kot dejstvo, da med napetostnimi preskusi ne pride do okvare, in te so navedene v določeni preskusni metodi.
Ta evropski standard ne zajema preskusnih metod, ki se uporabljajo izrecno v priročnih energetskih kablih.
Te so navedene v HD 605.
Za preskusne metode, ki se uporabljajo izrecno v komunikacijskih kablih, je odgovoren Tehnični odbor CENELEC TC 46X, Komunikacijski kabli. Trenutno so te preskusne metode navedene v seriji EN 50289.

General Information

Status
Published
Publication Date
07-Apr-2011
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Mar-2011
Due Date
27-May-2011
Completion Date
08-Apr-2011

Relations

Buy Standard

Amendment
EN 50395:2005/A1:2011
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50395:2005/A1:2011
01-maj-2011
0HWRGH]DSUHVNXãDQMHHOHNWULþQLKODVWQRVWLQL]NRQDSHWRVWQLKHQHUJHWVNLKNDEORY
'RSROQLOR$
Electrical test methods for low voltage energy cables
Elektrische Prüfverfahren für Niederspannungskabel und -leitungen
Méthodes d'essais électriques pour les câbles d'énergie basse tension
Ta slovenski standard je istoveten z: EN 50395:2005/A1:2011
ICS:
29.060.20 Kabli Cables
SIST EN 50395:2005/A1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50395:2005/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 50395:2005/A1:2011

EUROPEAN STANDARD
EN 50395/A1
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM

ICS 29.060.20


English version


Electrical test methods for low voltage energy cables



Méthodes d'essais électriques pour les Elektrische Prüfverfahren für
câbles d'énergie basse tension Niederspannungskabel und -leitungen




This amendment A1 modifies the European Standard EN 50395:2005; it was approved by CENELEC on
2011-03-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icelan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.