oSIST prEN 1015-18:2026

• Abstract:

  This document specifies a method for determining the water absorption coefficient due to capillary action of hardened mortars containing mineral binders and normal, recycled and as well as light weight aggregates.

• Status: Not Published
• Public Enquiry End Date: 17-Dec-2026
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CAA - Mineral binders and masonry
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 02-Nov-2026
• Due Date: 22-Mar-2027
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
• Ref Project: prEN 1015-18 - Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar

• Revises: SIST EN 1015-18:2004 - Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar
• Effective Date: 12-Nov-2025

SLOVENSKI STANDARD
01-december-2026
Metode preskušanja zidarske malte - 18. del: Določanje koeficienta kapilarnega
vpijanja vode strjene malte
Methods of test for mortar for masonry - Part 18: Determination of water absorption
coefficient due to capillary action of hardened mortar
Prüfverfahren für Mörtel für Mauerwerk - Teil 18: Bestimmung der kapillaren
Wasseraufnahme von erhärtetem Mörtel (Festmörtel)
Méthodes d'essai des mortiers pour maçonnerie - Partie 18: Détermination du coefficient
d'absorption d'eau par capillarité du mortier durci
Ta slovenski standard je istoveten z: prEN 1015-18
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2026
ICS 91.100.10 Will supersede EN 1015-18:2002
English Version
Methods of test for mortar for masonry - Part 18:
Determination of water absorption coefficient due to
capillary action of hardened mortar
Méthodes d'essai des mortiers pour maçonnerie - Prüfverfahren für Mörtel für Mauerwerk - Teil 18:
Partie 18: Détermination du coefficient d'absorption Bestimmung der kapillaren Wasseraufnahme von
d'eau par capillarité du mortier durci erhärtetem Mörtel (Festmörtel)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 125.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1015-18:2026 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Symbols . 4
6 Apparatus . 5
6.1 Tray, of minimum depth of 20 mm and of plan area large enough to contain the test
specimens to be immersed and fitted with a means of maintaining a constant water level.
............................................................................................................................................................................... 5
6.2 Four support pads or similar per test specimen, to store the test specimen, with a minimum
contact area, clear of the base tray and with the test specified depth of immersion. . 5
6.3 Stopwatch, graduated in seconds . 5
6.4 Weighing instrument, with an accuracy of 0,1 % of the total, dry mass of the test specimen.
............................................................................................................................................................................... 5
6.5 Ventilated oven, capable of maintaining a temperature of 60 °C ± 5 °C. . 5
6.6 Trowel or palette knife . 5
6.7 Conditioning chamber or room, capable of maintaining a relative humidity of 95 % ± 5 %
and 65 % ± 5 %. . 5
6.8 Metal mould and other ancillary apparatus, to produce 160 mm x 40 mm x 40 mm prisms
as described in EN 1015-11. . 5
7 Materials . 5
7.1 Water . 5
7.2 Demoulding agent (release oil, mould oil, formwork release agent oil) may only be used in
areas where the sides of the prism are not covered by non-woven fabric or filter paper. . 5
7.3 Sealing material, e.g. paraffin wax or synthetic reactive resin with a melting point above
60 °C . 5
7.4 Absorbent filter papers . 5
7.5 White cotton gauze, sheets each with a size of approximately 150 mm x 175 mm. as a
separating layer to detach the filter paper . 6
8 Sampling and preparation and storage of test specimens . 6
8.1 General. 6
8.2 Laboratory prepared mortars . 6
8.3 Mortars, other than laboratory prepared mortars . 6
8.4 Preparation and curing of the prisms . 6
8.5 Drying, breaking and sealing the test specimen . 7
9 Procedure . 7
10 Calculation and expression of results . 8
10.1 Renovation mortar . 8
10.2 Mortars other than renovation mortars . 9
11 Test report . 10
European foreword
This document (prEN 1015-18:2026) has been prepared by Technical Committee CEN/TC 125
“Masonry”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 1015-18:2002.
EN 1015-18:2026 includes the following significant technical changes with respect to EN 1015-18:2002:
• the content of the test standard has been adapted to the new template for test standards.
• the distinction between ‘renovation mortar’ and ‘other than renovation mortar’ has been
retained.
• the symbols have been defined in greater detail.
• the sequence for preparing the individual test specimens has been specified as: drying, breaking
and sealing the test specimen.
• the test report has been expanded to include the reporting of a standardized water absorption
(kg/m ) at t = 10 min.
1 Scope
This document specifies a method for determining the water absorption coefficient due to capillary action
of hardened mortars containing mineral binders and normal, recycled and as well as light weight
aggregates.
2 Normative references
This document incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this document only when incorporated in it by amendment or revision. For undated references
the latest edition of the publication referred to applies (including amendments).
EN 998-1, Specification for mortar for masonry — Part 1: Rendering and plastering mortar
EN 998-2, Specification for mortar for masonry — Part 2: Masonry mortar
EN 1015-2, Methods of test for mortar for masonry — Part 2: Bulk sampling of mortars and preparation of
test mortars
EN 1015-3, Methods of test for mortar for masonry — Part 3: Determination of consistence of fresh mortar
(by flow table)
EN 1015-11, Methods of test for mortar for masonry — Part 11: Determination of flexural and compressive
strength of hardened mortar
3 Terms and definitions
No terms and definitions are listed in this document.
4 Principle
The water absorption coefficient due to capillary action is measured using mortar prism specimens under
prescribed conditions at atmospheric pressure. After drying to constant mass, breaking the prism to
create test specimen and sealing four
...