iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 9104-3:2024

(Main)

Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication

Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication

This document defines the minimum requirements for auditors, CBs, Auditor Authentication Bodies (AABs), Training Provider Approval Bodies (TPABs), and Training Providers (TPs) who participate in the IAQG Industry Controlled Other Party (ICOP) scheme. The requirements in this standard supplement those defined within the EN 9104-1, EN 9104-2, ISO/IEC 17021-1, and ISO/IEC 17021-3 standards.
Data protection for the parties subject to this document and other relevant requirements of the ICOP scheme are managed via bi-lateral contracts between the joint controllers of the data.

Luft- und Raumfahrt - Qualitätsmanagementsysteme - Teil 003: Anforderungen an Schulung und Qualifikationen von Auditoren für Qualitätsmanagementsysteme der Luft- und Raumfahrt (AQMS)

Série aérospatiale - Systèmes de management de la qualité - Partie 003 : Exigences relatives à la formation, au développement, à la compétence et à l'authentification des auditeurs dans le domaine aéronautique, spatial et de défense

Le présent document définit les exigences minimales applicables aux auditeurs, aux OC, aux Organismes d'authentification des auditeurs (AAB), aux Organismes d'approbation des organismes de formation (TPAB) et aux Organismes de formation (OF) qui participent au schéma Autre partie sous surveillance de l'industrie (ICOP) de l'IAQG. Les exigences de la présente norme complètent celles qui sont définies dans l'EN 9104-1, l'EN 9104-2, l'ISO/CEI 17021-1 et l'ISO/CEI 17021-3.
La protection des données pour les parties soumises au présent document et autres exigences pertinentes du schéma ICOP sont gérées au moyen de contrats bilatéraux conclus entre les responsables conjoints du traitement des données.

Aeronavtika - Sistemi vodenja kakovosti - 003. del: Zahteve za usposabljanje, razvoj, usposobljenost in preverjanje avtentikacije presojevalcev na področju zračnega prometa, vesoljskih poletov in obrambe

Ta dokument določa minimalne zahteve za presojevalce, certifikacijske organe, organe za preverjanje avtentikacije presojevalcev (AAB), organe za potrjevanje ponudnikov usposabljanja (TPAB) in ponudnike usposabljanja (TP), ki sodelujejo v shemi ICOP skupine za kakovost v letalstvu (IAQG). Zahteve v tem evropskem standardu dopolnjujejo tiste, opredeljene v standardih EN 9104-1, EN 9104-2, ISO/IEC 17021-1 in ISO/IEC 17021-3.
Varstvo podatkov za subjekte, za katere se uporablja ta dokument, in druge pomembne zahteve sheme ICOP, urejajo bilateralne pogodbe med skupnimi upravljavci podatkov.

General Information

Status
Published
Public Enquiry End Date
08-Mar-2022
Publication Date
15-Jan-2024
ICS
03.100.70 - Management systems
03.120.10 - Quality management and quality assurance
49.020 - Aircraft and space vehicles in general
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2024
Due Date
09-Mar-2024
Completion Date
16-Jan-2024
Ref Project
EN 9104-3:2023 - Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication

Relations

Revised
SIST EN 9104-003:2010 - Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification
Effective Date
19-Jan-2023

Buy Standard

EN 9104-3:2024EN 9104-3:2024
PreviousNext
Standard
EN 9104-3:2024
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 9104-3:2024
01-februar-2024
Aeronavtika - Sistemi vodenja kakovosti - 003. del: Zahteve za usposabljanje,
razvoj, usposobljenost in preverjanje avtentikacije presojevalcev na področju
zračnega prometa, vesoljskih poletov in obrambe
Aerospace series - Quality management systems - Part 3: Requirements for Aviation,
Space, and Defence Auditor Training, Development, Competence, and Authentication
Luft- und Raumfahrt - Qualitätsmanagementsysteme - Teil 003: Anforderungen an
Schulung und Qualifikationen von Auditoren für Qualitätsmanagementsysteme der Luft-
und Raumfahrt (AQMS)
Série aérospatiale - Systèmes de management de la qualité - Partie 003 : Exigences
relatives à la formation, au développement, à la compétence et à l'authentification des
auditeurs dans le domaine aéronautique, spatial et de défense
Ta slovenski standard je istoveten z: EN 9104-3:2023
ICS:
03.100.70 Sistemi vodenja Management systems
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 9104-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 9104-3:2024

---------------------- Page: 2 ----------------------
SIST EN 9104-3:2024


EN 9104-3
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 03.100.70; 03.120.10; 49.020 Supersedes EN 9104-003:2010
English Version

Aerospace series - Quality management systems - Part 3:
Requirements for Aviation, Space, and Defence Auditor
Training, Development, Competence, and Authentication
Série aérospatiale - Systèmes de management de la Luft- und Raumfahrt - Qualitätsmanagementsysteme -
qualité - Partie 3: Exigences relatives à la formation, au Teil 3: Anforderungen an Schulung, Entwicklung,
développement, à la compétence et à l'authentification Kompetenz und Authentifizierung von Auditoren in
des auditeurs dans le domaine aéronautique, spatial et den Bereichen Luftfahrt, Raumfahrt und Verteidigung
de défense
This European Standard was approved by CEN on 18 December 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9104-3:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 9104-3:2024
EN 9104-3:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Auditor authentication . 8
4.1 General. 8
4.2 Auditor authentication requirem
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 9104-1:2024(Main)
Aerospace series - Quality management systems - Part 1: Requirements for Certification of aviation, space, and defense
EN 9104-1:2023

This document defines the industry-accepted requirements for the ICOP scheme, which provides confidence to ASD customers, that organizations with certification of their QMS, issued by accredited CBs, meet applicable AQMS standard requirements. The requirements in this document are applicable to all participants in the ICOP scheme. If there is a conflict between the requirements of this document, and customer or applicable statutory/regulatory requirements, the latter takes precedence.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9101:2024(Main)
Aerospace series - Quality management systems - Requirements for conducting audits of aviation, space, and defence quality management Systems
EN 9101:2023

1.1   General
This document defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the 9100-series standards, the organization’s QMS documentation, and customer and statutory/regulatory requirements.
The requirements in this document are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e. ISO/IEC 17000, ISO/IEC 17021 1). When there is conflict with these standards, the requirements of 9101 standard take precedence.
NOTE 1   In this document, the term "9100-series standards" comprises the 9100, 9110, and 9120 standards; developed by the IAQG and published by various national standards bodies.
NOTE 2   In addition to this document, the IAQG publishes deployment support material on the IAQG website (see http://www.sae.org/iaqg/) that can be used by audit teams, when executing the audit process.
1.2   Application
This document is intended to be used for audits of 9100-series standards by Certification Bodies (CBs) for certification of organizations, under the auspices of the ASD industry certification scheme [also known as the Industry Controlled Other Party (ICOP) scheme]. The ICOP scheme requirements are defined in the 9104-series standards (i.e. EN 9104 001, EN 9104 002, EN 9104 003).
NOTE   Relevant parts of this document can also be used by an organization in support of internal audits (1st party) and external audits at suppliers (2nd party).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9103:2024(Main)
Aerospace series - Quality management systems - Variation management of key characteristics
EN 9103:2023

1.1   General
This document is primarily intended to apply to new parts and products intended to be produced in an on-going production phase but can also be applied to parts currently in production (e.g., manufacturing, maintenance). This document is applicable to all production processes that influence the variation of KCs, as well as maintenance and service processes in which KCs are identified. It applies to organizations for assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product.
The variation control process begins with product definition, typically stated in the design documentation (e.g., digital model, engineering drawing, specification) which identifies KCs, and leads to a variation management process for those KCs. This process may also be used for producer-identified KCs (e.g., process KCs, additional/substitute product KCs).
Producers and their subcontractors are responsible for flow down of the standard requirements to those external providers, who produce design characteristics and provide production and service provisions, to ensure that KCs conform to the customer’s requirements.
1.2   Purpose
This document is designed to drive the improvement of manufacturing and maintenance processes through adequate planning and effective management of KC variation. This focus is intended to improve uniformity (less variation or minimum variation of product KCs) and acceptance probability of the end-product.
NOTE   Control of a product or process KC per this document does not constitute, nor imply acceptance of the resulting product. If variation management, under this document, is to be part of an acceptance decision, the requirements need to be specified in the applicable product acceptance plan or contract.
1.3   Convention
The following conventions are used in this document:
-   "shall" indicates a requirement;
-   "should" indicates a recommendation;
-   "may" indicates a permission;
-   "can" indicates a possibility or a capability.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9131:2020(Main)
Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
EN 9131:2020

1.1   Application:
This document defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g. engine, aircraft, spacecraft, helicopter), if specified by contract.
Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
1.2   Purpose:
The process of exchanging, coordinating, and approving nonconformity data via waiver/concession or product quality escape varies with the multiple relationships and agreements among all parties concerned. The information provided by this document forms architecture for submitting and managing data that allows for concise and accurate communication using various methods. The main objective of this document is to provide the definition of a data set that can be integrated into any form of communication (e.g. electronic data interchange, submission of conventional paper forms).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9115:2018(Main)
Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100)
EN 9115:2018

The requirements of EN 9100 apply with the following clarification for software.
This European standard supplements the EN 9100 standard requirements for deliverable software and
contains quality management system requirements for organizations that design, develop, and/or
produce deliverable software and services for the aviation, space, and defence industry. This includes,
as required, support software that is used in the development and maintenance of deliverable software
and services. The deliverable software may be stand-alone, embedded, mobile application, or loadable
into a target computer
This deliverable software may also be part of services (e.g., cloud environment, web hosted solutions or
platforms).
Where the use of Hardware Description Language (HDL) or high order language is utilized as the design
source of electronic hardware [e.g., Application Specific Integrated Circuit (ASIC), Programmable Logic
Device (PLD)]; the organization and customer, and/or supplier shall agree on the extent of applicability
of this supplement.
NOTE For airborne electronic hardware guidance, see RTCA/DO-254 or EUROCAE ED-80. For operations
requirements, see EN 9100, clause 8.
Where Commercial-Off-The-Shelf (COTS) or non-developmental software is integrated into a
deliverable product, the organization and customer shall agree on the extent of applicability of this
supplement.
For the purposes of this document, the terms “product” and “software product” are considered
synonymous.
For the purposes of this document, the term “services” may be considered a product.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9133:2018(Main)
Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
EN 9133:2018

This document defines a system for the qualification of standard products for aviation, space, and
defenc applications. It defines the principles that shall be adhered to when carrying out product
qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA
to confirm compliance is achieved and maintained, in accordance with the requirements of its product
definition and associated controlling technical specifications by an Original Component Manufacturer
(OCM) of standard products.
This document requires an OCM that has been granted product qualification approval to ensure
applicable approvals are maintained and renewed in accordance with the CA’s quality system for that
qualified product.
OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this
standard, shall as a prerequisite, maintain EN 9100 standard quality management system certification
approval. This certification shall be visible in the Online Aerospace Supplier Information System
(OASIS) database.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9120:2018(Main)
Quality Management Systems - Requirements for Aviation, Space and Defence Distributors
EN 9120:2018

This document includes EN ISO 9001:20152 quality management system requirements and
specifies additional aviation, space and defence industry requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary (not
alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable
statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an
organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer
and applicable statutory and regulatory requirements; and
b) aims to enhance customer satisfaction through the effective application of the system, including
processes for improvement of the system and the assurance of conformity to customer and
applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any
organization, regardless of its type or size or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services
intended for or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9110:2018(Main)
Quality Management Systems - Requirements for Aviation Maintenance Organizations
EN 9110:2018

This document includes EN ISO 9001:20152 quality management system requirements and
specifies additional civil and military aviation maintenance and continuing airworthiness industry
requirements, definitions and notes.
It is emphasized that the requirements specified in this document are complementary (not
alternative) to customer and applicable statutory and regulatory requirements.
If there is a conflict between the requirements of this document and customer or applicable
statutory or regulatory requirements, the latter shall take precedence.
This International Standard specifies requirements for a quality management system when an
organization:
a) needs to demonstrate its ability to consistently provide products and services that meet customer
and applicable statutory and regulatory requirements; and
b) aims to enhance customer satisfaction through the effective application of the system, including
processes for improvement of the system and the assurance of conformity to customer and
applicable statutory and regulatory requirements.
All the requirements of this International Standard are generic and are intended to be applicable to any
organization, regardless of its type or size or the products and services it provides.
NOTE 1 In this International Standard, the terms “product” or “service” only apply to products and services
intended for or required by, a customer.
NOTE 2 Statutory and regulatory requirements can be expressed as legal requirements.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9132:2017(Main)
Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking
EN 9132:2017

This standard defines uniform quality and technical requirements relative to metallic parts marking
performed using “data matrix symbology” within the aviation, space, and defence industry. ISO/IEC 16022
specifies general requirements (e. g., data character encodation, error correction rules, decoding algorithm).
In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the
requirements in this standard to ensure electronic reading of the symbol.
The marking processes covered by this standard are as follows:
• Dot Peening;
• Laser;
• Electro-Chemical Etching.
Further marking processes will be included, if required.
Unless specified otherwise in the contractual business relationship, the company responsible for the design
of the part shall determine the location of the data matrix marking. Symbol position should allow optimum
illumination from all sides for readability.
This standard does not specify information to be encoded.
1.1 Convention
The following conventions are used in this standard:
• The word “shall” indicates mandatory requirements;
• The word “should” indicates requirements with some flexibility allowed in compliance methodology.
Producers choosing other approaches to satisfy a “should” shall be able to show that their approach
meets the intent of the standard’s requirement;
• The words “typical”, “example”, “for reference” or “e. g.” indicate suggestions given for guidance only;
• Appendices to this document are for information only and are provided for use as guidelines;
• Dimensions used in this document are as follows. Metric millimetre (mm) sizes followed by inches (in)
in parentheses, unless otherwise stated.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 9104-002:2016(Main)
Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
EN 9104-002:2016

The requirements established in this document are applicable to the IAQG and associated sectors for
managing oversight to established requirements contained in EN 9104-series standards (i.e., EN 9104-
001, EN 9104-002, EN 9104-003). The requirements are applicable to IAQG working groups for oversight.
NOTE All required forms are depicted in Appendix A. These form exhibits are provided for reference only; the
current versions of these forms are available on the IAQG website.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day