SIST EN 13116:2024/oprA1:2026
(Amendment)Curtain walling - Resistance to wind load - Performance requirements
General Information
- Abstract
This document specifies the structural performance requirements of curtain walling under wind load, both its fixed and openable parts, under positive and negative static air pressure.
This document applies to any curtain walling product as defined in EN 13830.
- Status
- Not Published
- Public Enquiry End Date
- 19-Nov-2026
- Technical Committee
- ISTP - Doors and windows
- Current Stage
- 4020 - Public enquire (PE) (Adopted Project)
- Start Date
- 02-Oct-2026
- Due Date
- 19-Feb-2027
Relations
- Effective Date
- 24-Jun-2026
Get Certified
Connect with accredited certification bodies for this standard
DIBt (Deutsches Institut für Bautechnik)
German Institute for Building Technology.
DIN CERTCO
DIN Group product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
SIST EN 13116:2024/oprA1:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Curtain walling - Resistance to wind load - Performance requirements". This standard covers: This document specifies the structural performance requirements of curtain walling under wind load, both its fixed and openable parts, under positive and negative static air pressure. This document applies to any curtain walling product as defined in EN 13830.
This document specifies the structural performance requirements of curtain walling under wind load, both its fixed and openable parts, under positive and negative static air pressure. This document applies to any curtain walling product as defined in EN 13830.
SIST EN 13116:2024/oprA1:2026 is classified under the following ICS (International Classification for Standards) categories: 91.060.10 - Walls. Partitions. Facades. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13116:2024/oprA1:2026 has the following relationships with other standards: It is inter standard links to SIST EN 13116:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13116:2024/oprA1:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2026
Obešene fasade - Odpornost proti obremenitvi z vetrom - Zahtevane lastnosti -
Dopolnilo A1
Curtain walling - Resistance to wind load - Performance requirements
Vorhangfassaden - Widerstand gegen Windlast - Leistungsanforderungen
Façades rideaux - Résistance au vent - Prescriptions de performance
Ta slovenski standard je istoveten z: EN 13116:2024/prA1
ICS:
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 13116:2024
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2026
ICS 91.060.10
English Version
Curtain walling - Resistance to wind load - Performance
requirements
Façades rideaux - Résistance au vent - Prescriptions de Vorhangfassaden - Widerstand gegen Windlast -
performance Leistungsanforderungen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.
This draft amendment A1, if approved, will modify the European Standard EN 13116:2024. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Swit
...