SIST EN 60603-7:2010

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2008)

This part of IEC 60603-7 covers 8-way unshielded free and fixed connectors, it is intended to specify the common dimensions, mechanical, electrical and environmental characteristics and tests for the family of IEC 60603-7-x connectors. These connectors are intermateable (according to IEC 61076-1 level 2) and interoperable with other IEC 60603-7 series connectors.

Steckverbinder für elektronische Einrichtungen - Teil 7: Bauartspezifikation für ungeschirmte freie und feste Steckverbinder, 8polig (IEC 60603-7:2008)

Connecteurs pour équipements électroniques - Partie 7: Spécification particulière pour les fiches et les embases non écrantées à 8 voies (CEI 60603-7:2008)

La CEI 60603-7:2008 couvre les fiches et les embases non écrantées à 8 voies; elle est destinée à spécifier les dimensions communes, les caractéristiques mécaniques, électriques et environnementales ainsi que les essais pour la famille des connecteurs CEI 60603-7-x. Ces connecteurs sont accouplables et interopérables avec les autres connecteurs de la série CEI 60603-7. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: mise à jour des dessins et des programmes d'essai sur la base de la CEI 60603-7-4; correction de la figure illustrant la courbe de taux de réduction.

Konektorji za elektronsko opremo - 7. del: Podrobna specifikacija za 8-redne, nezaslonjene, proste in fiksne konektorje (IEC 60603-7:2008)

Ta del IEC 60603-7 zajema 8-redne nezaslonjene proste in fiksne konektorje in določa skupne mere, mehanske, električne in okoljske karakteristike ter preskuse za družino konektorjev IEC 60603-7-x. Ti konektorji so medsebojno združljivi (v skladu z 2. ravnjo standarda IEC 61076-1) in interoperabilni z drugimi konektorji serije IEC 60603-7.

General Information

• Status: Withdrawn
• Publication Date: 15-Dec-2009
• Withdrawal Date: 13-Nov-2023
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 14-Nov-2023
• Due Date: 07-Dec-2023
• Completion Date: 14-Nov-2023
• Ref Project: EN 60603-7:2009 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Relations

• Replaces: SIST EN 60603-7:2002 - Connectors for frequencies below 3 MHz for use with printed boards -- Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60603-7:2002 - Connectors for frequencies below 3 MHz for use with printed boards -- Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality
• Effective Date: 01-Jan-2009
• Replaced By: SIST EN IEC 60603-7:2021 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2020)
• Effective Date: 24-Nov-2020
• Amended By: SIST EN 60603-7:2010/A1:2012 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
• Effective Date: 28-Jan-2023
• Amended By: SIST EN 60603-7:2010/A1:2012 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
• Effective Date: 07-Jun-2022
• Amended By: SIST EN 60603-7:2010/A2:2019 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2008/A2:2019)
• Effective Date: 07-Jun-2022
• Amended By: SIST EN 60603-7:2010/A2:2019 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2008/A2:2019)
• Effective Date: 26-Jul-2016
• Revised: SIST EN IEC 60603-7:2021 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors (IEC 60603-7:2020)
• Effective Date: 01-Jan-2019
• Revised: SIST EN 60603-7:2002 - Connectors for frequencies below 3 MHz for use with printed boards -- Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality
• Effective Date: 04-Sep-2012
• Revised: SIST EN 60603-7:2010/A1:2012 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
• Effective Date: 16-Jul-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60603-7:2010
01-januar-2010
1DGRPHãþD
SIST EN 60603-7:2002
Konektorji za elektronsko opremo - 7. del: Podrobna specifikacija za 8-redne,
nezaslonjene, proste in fiksne konektorje (IEC 60603-7:2008)
Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded,
free and fixed connectors (IEC 60603-7:2008)
Steckverbinder für elektronische Einrichtungen - Teil 7: Bauartspezifikation für
ungeschirmte freie und feste Steckverbinder, 8polig (IEC 60603-7:2008)
Connecteurs pour équipements électroniques - Partie 7: Spécification particulière pour
les fiches et les embases non écrantées à 8 voies (CEI 60603-7:2008)
Ta slovenski standard je istoveten z: EN 60603-7:2009
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60603-7:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60603-7:2010

---------------------- Page: 2 ----------------------

SIST EN 60603-7:2010

EUROPEAN STANDARD
EN 60603-7

NORME EUROPÉENNE
November 2009
EUROPÄISCHE NORM

ICS 31.220.10 Supersedes EN 60603-7:1997


English version


Connectors for electronic equipment -
Part 7: Detail specification for 8-way, unshielded,
free and fixed connectors
(IEC 60603-7:2008)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Partie 7: Spécification particulière Teil 7: Bauartspezifikation
pour les fiches et les embases für ungeschirmte freie und feste
non écrantées à 8 voies Steckverbinder, 8polig
(CEI 60603-7:2008) (IEC 60603-7:2008)




This European Standard was approved by CENELEC on 2009-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60603-7:2009 E

---------------------- Page: 3 ----------------------

SIST EN 60603-7:2010
EN 60603-7:2009 – 2 –
Foreword
The text of document 48B/1883A/FDIS, future edition 3 of IEC 60603-7, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60603-7 on 2009-09-01.
This European Standard supersedes EN 60603-7:1997.
EN 60603-7:2009 includes the following significant technical changes with respect to EN 60603-7:1997:
– drawings and test schedules were updated based on the work done developing EN 60603-7-4;
– a corrected figure (Figure 10) illustrating a connector de-rating curve has been prepared and inserted
in the text;
– Annex D contains the dimensions that define the panel mounting features on the connector and panel
that were referenced as the Type A, variant 03 connector in EN 60603-7:1997.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-09-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60603-7:2008 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60603-7-2 NOTE  Harmonized as EN 60603-7-2:2009 (not modified).
IEC 60603-7-3 NOTE  Harmonized as EN 60603-7-3:2009 (not modified).
IEC 60603-7-4 NOTE  Harmonized as EN 60603-7-4:2005 (no
...