Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6506-3:2023)

ISO 6506-3:2014 specifies a method for the calibration of reference blocks to be used in the indirect verification of Brinell hardness testing machines as described in ISO 6506‑2.
The procedures necessary to ensure metrological traceability of the calibration machine are also specified.

Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 3: Kalibrierung von Härtevergleichsplatten (ISO/DIS 6506-3:2023)

In diesem Teil von ISO 6506 ist das Verfahren für die Kalibrierung von Härtevergleichsplatten festgelegt, die bei der indirekten Überprüfung von Härteprüfmaschinen nach Brinell nach ISO 6506-2 verwendet werden.
Weiterhin sind die Verfahren festgelegt, die zur Sicherstellung der metrologischen Rückführbarkeit der Bezugsnormalmesseinrichtungen erforderlich sind.

Matériaux métalliques - Essai de dureté Brinell - Partie 3: Étalonnage des blocs de référence (ISO/DIS 6506-3:2023)

L'ISO 6506-3 :2014 spécifie une méthode pour l'étalonnage des blocs de référence à utiliser pour la vérification indirecte des machines d'essai de dureté Brinell, comme décrite dans l'ISO 6506‑2.
Les procédures nécessaires pour assurer la traçabilité métrologique de la machine d'étalonnage sont également spécifiées.

Kovinski materiali - Preskus trdote po Brinellu - 3. del: Umerjanje primerjalnih ploščic (ISO/DIS 6506-3:2023)

General Information

Status
Not Published
Public Enquiry End Date
30-Dec-2023
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
06-Nov-2023
Due Date
25-Mar-2024

Relations

Buy Standard

Draft
prEN ISO 6506-3:2023
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 6506-3:2023
01-december-2023
Kovinski materiali - Preskus trdote po Brinellu - 3. del: Umerjanje primerjalnih
ploščic (ISO/DIS 6506-3:2023)
Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
(ISO/DIS 6506-3:2023)
Metallische Werkstoffe - Härteprüfung nach Brinell - Teil 3: Kalibrierung von
Härtevergleichsplatten (ISO/DIS 6506-3:2023)
Matériaux métalliques - Essai de dureté Brinell - Partie 3: Étalonnage des blocs de
référence (ISO/DIS 6506-3:2023)
Ta slovenski standard je istoveten z: prEN ISO 6506-3
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
oSIST prEN ISO 6506-3:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 6506-3:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 6506-3:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6506-3
ISO/TC 164/SC 3 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-10-23 2024-01-15
Metallic materials — Brinell hardness test —
Part 3:
Calibration of reference blocks
Matériaux métalliques — Essai de dureté Brinell —
Partie 3: Étalonnage des blocs de référence
ICS: 77.040.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 6506-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 6506-3:2023
ISO/DIS 6506-3:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6506-3
ISO/TC 164/SC 3 Secretariat: DIN
Voting begins on: Voting terminates on:

Metallic materials — Brinell hardness test —
Part 3:
Calibration of reference blocks
Matériaux métalliques — Essai de dureté Brinell —
Partie 3: Étalonnage des blocs de référence
ICS: 77.040.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 6506-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 6506-3:2023
ISO/DIS 6506-3:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Manufacture of reference blocks .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.